Velleman VTSG60SFN User manual

VTSG60SFN
USER MANUAL 3
HANDLEIDING 8
MODE D'EMPLOI 14
MANUAL DEL USUARIO 20
BEDIENUNGSANLEITUNG 26
INSTRUKCJA OBSŁUGI 32
MANUAL DO UTILIZADOR 38

VTSG60SFN
V. 03 –03/02/2021 2 ©Velleman nv

VTSG60SFN
V. 03 –03/02/2021 3 ©Velleman nv
USER MANUAL
SOLDERING GUN WITH AUTO FEED
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing
this device into service. If the device was damaged in transit, do not install or use it and
contact your dealer.
2. Safety Instructions
This device can be used by children aged from 8
years and above, and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning the use of the
device in a safe way and understand the hazards
involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made
by children without supervision.
Read and understand this manual and all safety
signs before using this appliance.
Indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids. Never put
objects filled with liquids on top of or close to the
device.
Always disconnect mains power when the device is
not in use or when servicing or maintenance

VTSG60SFN
V. 03 –03/02/2021 4 ©Velleman nv
activities are performed. Handle the power cord by
the plug only.
Caution! After switching off, leave the power
cord plugged in for a few minutes. When you
switch off the unit, the automatic cooling function
blows cooling air through the heater pipe for a
short period. This protects the heater from damage
and extends its lifetime. Do not disconnect the
mains plug during this cooling process.
Do not crimp the power cord and protect it against
damage.
Warning! If the power cord is damaged, it must
be replaced by the manufacturer, its service agent,
or similarly qualified persons in order to avoid any
hazard.
Make sure that the available voltage does not
exceed the voltage stated in the specifications of
this manual.
Plug the power cord into a suitable, earthed mains
outlet.
Risk of electroshock when opening the cover.
Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the
housing yourself. Have the device repaired by
qualified personnel.
Do not operate the device with wet hands.
Never use the device on live electronic circuits.
Make sure power to the work piece is cut and
capacitors are discharged.
Do not use near inflammable products or in
explosive atmospheres. Heat can cause fire to

VTSG60SFN
V. 03 –03/02/2021 5 ©Velleman nv
inflammable products even when they are not in
sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this
can cause serious burns. Keep the tips and hot air
away from the body, clothes, or other flammable
material. Do not aim the hot air gun at the eyes.
Use gloves and/or heat-resistant tools to pick up
the PCB assembly to prevent burns. Always return
the irons and gun to their stands between uses;
always let the device cool down after use and
before storage.
Place the device on a level, stable, and fire
resistant working surface.
WARNING! - This tool must be placed on its stand
when not in use; do not leave the tool unattended
when switched on.
Do not inhale solder fumes. The vapours that are
released during soldering are harmful. Therefore,
you shall only use the soldering station in well-
ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder
residue in accordance with local regulations.
•Use the soldering iron on a heatproof
workbench.
•Place the soldering iron in its holder after use.
•Let a hot soldering iron cool down naturally and
do not immerse in water.