Velocity VMP21L User manual

MANUFACTURER CODE: VMP21L
OW CODES: CPVELMOBGB, CPVELPEDBW,
CPVELMOBGR, CPVELMOBWH, CPVELPEDWI
Assembly Instructions
Velocity Mobile Pedestal
1 CARTON
1 / 4
manufactured by designtec
www.designtec.com.au

NOTE
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screw and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least every 4 months.
WARNING
If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.
A - 17mm SCREW
x 15
B - HANDLE SCREW
x 6
D - CASTOR
x 4
TOOLS REQUIRED FOR ASSEMBLY
1 x Philips Head Screwdriver
HARDWARE INCLUDED
Note - Individual hardware images are not to scale.
C - HANDLE
x 3
IMPORTANT NOTE
The hardware pack is located in the top drawer of the unit.
Use keys taped to the bottom of the pedestal unit to unlock the top drawer.
2 / 4

STEP 1
Turn unit upside down to attach
CASTORS (D), using 17mm SCREWS (A).
Note: only THREE (3) 17mm Screws (A)
are required to secure the front left
CASTOR (D) to allow for the locking
grove.
(A)
(D)
3 / 4

STEP 3
Open each drawer to attach HANDLES (C) using HANDLE SCREWS (B); fasten with
screwdriver.
(C)
(B)
STEP 2
Once castor are fastened by using your screwdriver to secure, turn pedestal unit the
correct way up to attached the handles.
4 / 4