Vents MVP DVUT 1000 User manual

MVP DVUT 1000
Vertical duct connection module
INSTALLATION INSTRUCTION

2
MVP DVUT 1000
www.ventilation-system.com
OVERALL DIMENSIONS
The product is designed to connect the unit.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).
The product is purchased separately and is installed in the air handling unit by an installer or electrician.
PURPOSE
441
216
1763
244 320
315
1763
244 320
219
325x2
29
385 385 385
121 346
402
304
281
29
7x12
612
568
2327
NAME NUMBER
Product 1 pc.
Installation instruction 1 pc.
Mounting screw with washer 4 pc.
Set of decorative panels with plugs and fasteners 1 pcs.
Packing box 1 pc.
DELIVERY SET
The weight of the product is 48.1 kg.

3
www.ventilation-system.com
OPERATION LOGIC
MOUNTING AND SET-UP
The product is fixed to the mounted unit using screws screwed into the mounting plate of the unit and the screws contained in the
product. Remove the screws on the mounting plate corresponding to the mounting holes. Attach the product to the unit in accordance
with the diagram shown.
11x2
Install the decorative panels. Install the panels in the centre first, then the top and bottom panels.
Special fasteners are used to mount the unit with the product. Mounting brackets for mounting the unit with the product are included
with the unit.
TECHNICAL MAINTENANCE
Maintenance operations of the product are required 3-4 times per year in accordance with the recommendations in the relevant section
of the user manual for the unit.

V177-1-1EN-01