Vertilux Single Fascia Kassett User manual

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
1
Owner / Warrantee: Mosaic Construction Pty Ltd
AVALON – 98-106 Duporth Avenue, Maroochydore Qld 4558
Blind Description: Manual Curtains & Tracking
Manual Roller blinds
Motorised Roller blinds including Worldscreens
WARRANTY
This warranty covers any defects in manufacture for the warranty period deemed by the manufacturer from the
date of Practical Completion, but does not include abuse by client or others, water damage, incorrect installation
(when not installed by Ecliptic Installations) or normal wear and tear.
Warranty is on product only. Products must be returned to Ecliptic Installations for warranty claims. The blinds
will need to be packed suitably so as not to be damaged in transit on return to us. Any damage in freight will
be the responsibility of the customer. This warranty specifically covers blinds supplied by Ecliptic Installations.
Approved child safety devices are supplied with our interior products and must be fitted to claim warranty.
Ecliptic Installations provides a 12months installation warranty. Ecliptic will warrant that the installation is
carried out in a workmanlike manner not withstanding that the medium we are installing into may be beyond
our control and we cannot warrant that the timber, concrete, brick, gyprock or other medium is sound. Our
expectation is that the installation medium is sound but we can only inspect this visually.
Your properties condition is your responsibility.
OPERATING INSTRUCTIONS
To operate the manual blinds:
1. Pull downwards on the REAR chain to lower the blind (front Chain if blind is overroll).
2. Pull downwards on the FRONT chain to raise the blind (Rear Chain if blind is overroll).
Blinds are not to be left in the downwards position when doors or windows are open as they will get sucked out
by the wind, causing damage to the fabric and mechanism, this is classed as mishandling of the blinds and not
covered under warranty.

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
2
To operate the Motorised Roller Blinds, select the channel required relating to the blinds required to be
operated, then simply press on the switch control in the direction of the arrow, to either raise or lower the
blinds. The one switch / control unit in each area, will operate all blinds in the room. There should be no necessity
to tamper with the blinds themselves, and this may void the warranty offered, should any unauthorised works
be attempted.
When operating the Motorised Roller blinds, check for obstructions on sills or floor, before raising or lowering
blinds. Avoid lowering blinds at open windows or doors to reduce the risk of damage.
All curtains are operated by grabbing the edge of the curtain and pulling gently to both open and close. Do not
yank on the curtain, or pull hard at the tracks as this may cause damage to the system.
MAINTENANCE
General maintenance or cleaning of Motorised Roller Blinds with a feather duster, or soft bristle brush
attachment on a vacuum cleaner, to remove any dust collection, should be carried out a minimum of
every 3 months.
Do not crush the fabric, as this will leave permanent marks in the fabric which cannot be removed. When
windows are being cleaned, ensure that the blinds are raised, and avoid any overspray of cleaners solutions
coming in contact with the blinds as cleaners solutions often have harsh chemicals which can permanently
damage the fabric on these blinds.
Fabric marks caused by clients are not covered under warranty.
In addition to the above maintenance, the battery in the remote control should be changed periodically.
Batteries are not covered by this warranty.
Repairs or service to your product, should only be undertaken by experienced technicians.
Repairs done by a party other than Ecliptic Installations or a technician approved by Ecliptic Installations may
void the product warranty. For after sales service, the consumer should contact Ecliptic Installations who
supplied and installed the product.
Tracks are generally maintenance free. Should the curtain not travel smoothly along the track, firstly check for
any obstructions or damage to the track. Check also that the curtain itself is not fouling on some obstruction.
If the track appears to be clear, undamaged and the curtain is clear also, we would suggest a light spray of
silicone lubricant may rectify the problem. If the problem still remains, contact our Office on [phone]
during business hours.
Curtains - General cleaning of curtains with a soft bristle brush attachment to a vacuum cleaner, will remove
any excessive dust build up. Attached to the back of the curtain at the heading, there is a label attached, which
tells the fabric content of the curtain (eg. polyester/cotton), whilst the other label tells the care and washing
instructions.
GENERAL PROCEDURES
Should any of the blinds cease to operate, firstly check for obstructions fouling on the blinds. If everything
appears to be in order, and the blinds are still inoperative, please contact our Office on [phone] or send
us an email to [email protected].

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
3
PRODUCT SPECIFICATIONS
vertilux.com.au BLINDS PROUDLY MADE IN AUSTRALIA
No unauthorised reproduction of images, wording and technical drawing without permission from Vertilux. Product specifications may change without notice. The colour image reproduction may vary slightly to actual product. All variations are within industry standards.
V1_0816
1.11a Single Fascia Kassett
1. Fascia kassett
2. Fascia kassett end
caps
3. Bracket
Extruded aluminium manufactured to ISO9001.
Moulded wear-resistant polycarbonate.
Spring loaded pressed zinc coated steel.
Componentry
References
2
2
3
90mm
90mm
2
1
Dimensions & Limitations
MINIMUM WIDTH* 600mm
MAXIMUM WIDTH* 5800mm
Technical Information

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
4
No unauthorised reproduction of images, wording and technical drawing without permission from Vertilux. Product specifications may change without notice. The colour image reproduction may vary slightly to actual product. All variations are within industry standards.
V1_0816
vertilux.com.au BLINDS PROUDLY MADE IN AUSTRALIA
1.02 Easydrive BGS®Roller Blind System
1. Clutch
2. Idle end plug
3. Tube
4. Brackets
5. Base rail
6. Chain
Winder with direct action dual reverse clutchwound springs.
U.V. stabilised nylon with high resistance to ultraviolet light.
Quick turn spring release for easy pin insertion into bracket.
U.V. stabilised nylon with high resistance to ultraviolet light.
Aluminium alloy tube manufactured to ISO9001 with multiple cloth xing.
40mm standard for widths up to 2199mm / 47mm for widths over 2200mm.
Colour coordinated pressed powdercoated steel.
Extruded aluminium manufactured to ISO9001. Vertilux design available in
various colours.
No.10 chain in either nylon bead chain or stainless steel ball chain.
Technical Information
Brackets + Pelmet AllowancesAssembly
Componentry
40mm
1
6
23
NB. 47mm tube suitable for
widths over 2200mm
NB. 40mm tube suitable for
widths up to 2199mm
47mm
14mm 14mm
standard clutch
PLEASE NOTE: Only the clutch in this BGS®roller blind system comes with a 15 year warranty.
4
1
References
MINIMUM WIDTH* 430mm
MAXIMUM WIDTH* 2400mm
MINIMUM DROP* 500mm
MAXIMUM DROP* 3050mm
* Recommended tolerances.
Dimensions & Limitations
Standard Base Rail Options
25mm Tear Drop
Back complete
with bumper Front
27.5mm Ovolo with bumper 25mm Tear Drop with bumper
27.5mm Ovolo
NOTE: Dimensions relate to height of Base Rail.
14mm
7mm
50mm 20mm
65mm
100mm
80mm /
minimum allowance
4
50mm
65mm
NB. Fabric measurements taken from the thickest fabric available (0.65mm)
Calculated over 3000 drop

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
5
vertilux.com.au BLINDS PROUDLY MADE IN AUSTRALIA
No unauthorised reproduction of images, wording and technical drawing without permission from Vertilux. Product specifications may change without notice. The colour image reproduction may vary slightly to actual product. All variations are within industry standards.
V1_0816
47mm/56mm/69mm tube
1.05 Motorised Roller System
1. 40mm / 50mm motor
2. Key tube
3. Female tube connector
4. Brackets
5. Idle end pin lock
6. Motor ring adaptor
7. Ring adaptors
8. Base rail
Motor to suit application.
Aluminium alloy tube, with multiple cloth xing. 47mm / 56mm / 69mm external.
UV stabilised nylon. Idle end connector. 40mm.
Male and female colour coordinated pressed powdercoated steel.
UV stabilised nylon with high resistance to ultraviolet light. 4mm tolerance.
Colour coordinated pressed steel.
UV stabilised nylon adaptor for 40mm / 56mm / 69mm tube.
Extruded aluminium manufactured to ISO9001. Vertilux design available in
various colours.
MINIMUM WIDTH* LS 40 - 550mm
LT 50 - 700mm
RTS 40 - 650mm
RTS 50 - 750mm
MAXIMUM WIDTH* 3100mm
MINIMUM DROP* 500mm
MAXIMUM DROP* 5000mm
Technical Information Dimensions & Limitations
40mm Motor Componentry
6
5
4
4
1
3
4
70mm
110mm
63mm
2
50mm 50mm 80mm /
minimum allowance
47mm
Idle End / Intermediate Brackets
56mm Tube 69mm Tube
73mm
120mm
84mm
122mm
80mm
86mm
110mm /
minimum allowance
120mm /
minimum allowance
50mm Motor with 56mm/69mm Adaptors
56.65
7
56mm tube - widths up to 3899
69mm tube - widths > or over 3900
18mm 18mm
20mm
86mm
69.65
80mm 80mm
Standard Base Rail Options
References
25mm Tear Drop
Back complete
with bumper Front
27.5mm Ovolo with bumper 25mm Tear Drop with bumper
27.5mm Ovolo
NOTE: Dimensions relate to height of Base Rail.

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
6
by Vertilux
It might look like magic, but it's actually just brilliant
design.
Worldscreen by Vertilux is a motorised blind with great
control of light and temperature while blending into
exterior architecture or interior design like the rest of
the Vertilux roller blind systems but for one very big
difference.
Worldscreen by Vertilux is for sites requiring wide
blinds with no fabric splits!
Worldscreen has four patents, and one patent pending,
for two sizes of MicroCassettes that allow us to
condense the blind into a discreet headbox that
occupies minimal space.
 MicroCassette 40:16 is our more compact
design, with a headbox that is only 80 mm
(3 1/8") square but contains a blind of up to
12 mt (40 feet) wide and 5 mt (16 feet) drop.
 MicroCassette 40:30 is only incrementally
larger, at 115 mm (4 1/2") square, and it
contains a blind of up to 12 mt (40 feet)
wide and 9 mt (30 feet) drop.
Worldscreen by Vertilux offers a clear alternative to the
standard option of multiple blinds over a wide width.
As few as three people can install the MicroCassette
40:16 or the MicroCassette 40:30 without special
equipment. One motor controls a width of up to 12 mt
(40 feet), saving the cost of additional motors and
wiring and without a split in the fabric.
Worldscreen Design Options:
 Blind with no Guide Wires or Guide Rails
 Blind with Guide Wire
 Blind with 35 mm Guide Rail (Note: Guide Rail will
not block out light)
V2_122012

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
7

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
8

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
9

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
10
PLEASE NOTE: Textile details and their colourways may not appear true to colour or scale due to the nature of the media. Samples can be forwarded on request to your representative or by emailing [email protected].
BLINDS PROUDLY MADE IN AUSTRALIA
vertilux.com.au
vertilux
Fabric SpecicationsColour Range
V7_0216
PEARL ANTIQUE POTTERY
JASPER GRAVEL OXIDE
BLACK
Light and Solar Optical Properties
Legend to Light and Solar Optical Properties
abbreviations:
Ts: Solar Transmittance (%) As: Solar Absorbance (%) Rl: Light Reectance (%) Tuv: Ultraviolet Transmittance (%)
Rs: Solar Reectance (%) Tv/Vlt: Visible Light Transmittance (%) Al: Light Absorbance (%) O-F. Openness Factor
Independently tested to ASHRAE 74-1988
Independently tested to DIN EN410: 1998 Shading Coefcient G-Value
Ts Rs As Tv/Vlt Rl Al Tuv O-F 3mm
Cl.
6mm
Cl.
6mm
H.A.
3mm
Cl.
6mm
Cl.
6mm
H.A.
PEARL 10 52 38 10 50 38 9 4 0.43 0.43 0.37 0.37 0.37 0.32
ANTIQUE 9 51 40 8 50 40 7 3 0.43 0.42 0.36 0.37 0.37 0.31
POTTERY 8 50 42 6 48 45 5 2 0.47 0.46 0.38 0.41 0.40 0.33
JASPER 8 48 44 5 44 49 5 2 0.50 0.48 0.40 0.43 0.42 0.35
GRAVEL 7 49 44 4 45 49 4 2 0.51 0.50 0.40 0.44 0.43 0.35
OXIDE 6 49 45 3 45 51 6 3 0.48 0.47 0.39 0.42 0.39 0.34
BLACK 6 48 46 3 43 53 3 2 0.55 0.53 0.42 0.48 0.46 0.37
Why EUROSCREEN METALLISED™ Transparent?
The Vertilux Euroscreen Metallised™ range is a high quality 100% Trevira CS fabric. Euroscreen Metallised™ Transparent is a transparent fabric with a
metallised back that is designed to exceed the stringent standards in light, glare reduction and insulation from harmful UV rays. With superior heat and
reection properties it assists in maintaining an energy efcient environment. Giving you protection without blocking your view. Available in a range of
colours that coordinate well with other Vertilux fabric ranges and can be used with the Vertilux Roller Blind, Roman Blind or Panel Glide Systems.
EUROSCREEN METALLISED™Transparent
STREAMLINED
Quality: 100% Trevira CS Metallised
(100% Free of PVC, Formaldehyde and Halogen
to help reduce toxins in your environment)
Country of Origin: Germany
Width: Maximum Roller Width 20mm
Maximum Roman Width 20mm
Weave & Opacity: Panama weave to achieve transparent opacity.
Weight: 170 gr/m²
Thickness 0.36mm
Custom Colour: Available for orders of 500lm.
Printing: Suitable for screen printing.
Ask for more details.
Fire Classications: AWTA AS1530.2 1993
AWTA AS1530.3 1993
AWTA AS3837 1998
German Standard: DIN 4102 - B1
French Standard: M1
GBCA Recognised
Third Party Product
Certication Scheme
Yes – Global GreenTagCertTM
GreenRate | Level A
Oeko-Tex Certied: Yes
Lightfastness: Tested DIN EN ISO 105 B2: 5 - 6
Fabric with a 5+ result offers excellent
resistance to the fading effect of light.
VOC test: ASTM: D5116
Fabric Warranty: 7 years (internal use only)
Care Instructions: Do not allow dust to accumulate. Gently vacuum
with appropriate attachment. Do not dry
clean. Test in an inconspicuous area with mild
detergent solution before spot cleaning. When
spot cleaning do not allow that area to become
fully wet, use damp cloth only.

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
11

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
12

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
13

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
14

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
15

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
16
vertilux.com.au
BLINDS PROUDLY MADE IN AUSTRALIA 22 Thomsons Road, Keilor Park, VIC 3042 Toll Free: 1800 837 845
V2 0219
Vertilux Blind Systems
Fabric Warranty & General Information
Blind Fabric Warranty
Vertilux exclusive Greenvision®Trevira CS fabric ranges
come with a 7 year warranty, and 5 years on the
Greenvision®and Options Polyester ranges. All other
Vertilux fabric ranges come with a 2 year warranty or as
per the specic fabric manufacturer’s warranty advice.
The warranty does not cover the following:
1. Any condition or damage relating to, or resulting from,
misuse, abuse, accidents, alterations or other damage
(such as marks made by insects).
2. Normal fair wear and tear including discoloration or
fading over time.
3. Maintenance and care not in accordance with
recommended instructions.
4. Blind sizes outside of recommended dimensions.
5. Blinds not tted according to installation instructions.
Nothing herein before mentioned shall deem the company
responsible of consequential damage or for any other direct
or indirect damages, loss, cost expense of fees. The benets
conferred by this warranty are in addition to other rights and
remedies in respect of the product that the purchaser has
(if any) including relevant provisions of the Trade Practices
Amendment (Australian Consumer Law) Act (No.1) 2010 and
similiar State legislations.
Fabric Cleaning
Do not allow dust to accumulate. Gently vacuum with
appropriate attachment. Remove surface dust with a
feather duster or gentle brush.
The use of cleaning chemicals can void the warranty.
However, it is recommended that where possible,
cleaning is done by a specialised professional cleaner.
Custom Blinds
Vertilux cannot provide a warranty or guarantee the
performance of a fabric when a product is requested
to be manufactured outside of its engineered
tolerances, those include but are not limited to:
1. Roller Blinds ordered outside the dimensions
outlined in our pricelist (with the exception of
blinds under 1000d) eg, 600w x 1500d (width is under
650mm) or 2000w x 4000d (drop is over 3600mm)
2. Railroaded Fabric - when the fabric is turned to
provide extra width. This often causes curling
or cupping on the sides of the blind and is not
covered by warranty. eg, Yang Fabric is 2800w,
however blind requested is 2850w x 2000d.
3. When the fabric drop required is more than 3
times the width of the blind. eg, 800w x 3000d.
Early component failure, tracking issues and general
fabric distortions occur due to the excess load of
oversized blinds.
Fabric Bagging or ‘V’ing. Larger blinds will show
signs of fabric bagging or wavering. The width of the
blind as well as the weight of screen fabric contribute
to this effect.
The warranty does cover pin holes, fabric defects and
other specic faults of the fabric not related to the
sizing of the blind.
Warranty Claims
Warranty claims must be made as possible after
discovery of the defect and, in any event, within
the warranty period.
NO EXTENSION TO WARRANTY PERIOD
Repairs carried out, or replacement provided,
under this warranty do not extend the relevant
warranty period, and do not initiate a new warranty
period. The Warranty period for any replacement
parts or new Goods installed will end together
with the initial Warranty.

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
17

Window Coverings
Warranty, Operations
and Maintenance Manual
Ecliptic Australia Pty Ltd T/as Ecliptic Installations
ABN: 30 051 964 813
Office Ph: 07 5456 2334
Email: [email protected]
Website: www.ecliptic.com.au
18