Verykool I800 User manual

1
About this Guide
Aboutthisguide
This User’s Guide provides you with condensed information about how to
use your phone. To quickly learn the basics for your phone, please refer
to “Quick Start Guide”.
A
nintroductiontooperation
To access function menu, this guide shows the path in following way:
Operate through: Main Menu ÆMessages.
This case shows: In the standby mode, press centre key; the phone
displays main menu, you choose [Messages] to highlight it; Press centre
key to open message menu.
A
n introduction to phone interface
To describe phone interface, this guide shows in following way:
[ ] Main Menu interface display
<> Buttom
About the instruction icons
Following instruction icons appears to provide special information:
Indicates that you need to pay careful attention.
A service or feature requires network service or registered
service support. Contact your network service provider for more
information.

2
Contents
Your phone.............................................................4
Front view................................................4
Side view .................................................4
Back view ................................................5
Top...........................................................5
What’s in your package............................5
SIM card and battery ...............................6
Power on or off ........................................8
Display and keys......................................9
Input method..........................................10
Access Main functions menu................. 11
Customize your phone...........................13
Quick start guide..................................................16
Calls.......................................................16
Messages ..............................................20
Contacts.................................................22
Camera..................................................23
My music ...............................................24
My files ..................................................25
Browser .................................................25

3
Connections...........................................26
Function menu.....................................................29
STK........................................................29
My pictures ............................................29
Messages ..............................................30
My files ..................................................36
Multimedia .............................................38
Tools......................................................43
My music ...............................................45
Calendar................................................48
Games...................................................49
GPS.......................................................49
My links..................................................51
Settings..................................................51
Voicemail ...............................................57
Contacts.................................................58
Recent ...................................................60
Browser .................................................61
Problems and solutions........................................66
Health and safety.................................................69
Declaration of conformity......错误！未定义书签。

4
Your phone
Frontview
Sideview
Earpiece
Volume key
Lock key
Home key
Send key
Secondary
camera lens
Display
End key
Charger connector/
USB connection
Take picture
Record video

5
Back view
Top
What’sinyourpackage
z20pin USB Cable+ Interchangable USB charger : 1pcs
zStereo headset: 1pcs
zBattery 1100mAh: 1pcs
zUser manual: 1pcs
zWarranty card: 1pcs
zComposite AV cable: 1pcs
Speaker
Main camera
lens
Battery cover
Power key 3.5mm jack

6
Get started
SIMcardandbattery
When you subscribe to a cellular network, you receive a plug-in
Subscriber Identity Module card (SIM card), loaded with your
subscription details, your Personal Identification Number (PIN), and
available optional services.
For availability and information on using SIM card service, contact your
SIM card vendor or network service provider.
If your phone supported SIM LOCK function, when you use unauthorized
SIM card, phone can not be registered to the network. Please contact
your SIM card vendor.
If you need 3G network service, you may buy and use Universal
Subscriber Identity Module card (USIM card).
InserttheSIMcardandbattery
Switch off your phone and ensure the charger is disconnected to the
phone.
1. Make the phone faced down and push the battery cover towards
the phone bottom.
2. Slide the battery cover open and lift it off.
3. Make sure that the gold-colored contacts on the SIM card are face
down and insert the SIM card.
4. Install the battery with the metal contacts downward and suited.
5. Push the battery cover back to the position.

7
Chargethebattery
When the battery is low, a warning tone sounds, the low battery message
displays, the empty battery icon blinks, and some features of the phone
may be disabled.
If the battery level becomes too low, the phone automatically turns off.
Recharge your battery.
When charging, the battery icon in the up right of the phone screen
flashes. When the phone is completely charged, the battery-full symbol in
the up right of the phone screen appears. When charging with the phone
switched off, the screen displays charging status and promotion icon of
completion. It may take 2.5 hours until the battery icon indicates that the
battery is fully charged.
1. Open the rubber closure.
2. Plug the charger into the phone with the metal material upward.
3. Remove the charger from the phone gently.
4. Close the rubber closure.

8
Poweronoroff
Before switching on the phone, make sure the phone is charged and the
SIM card is in the phone.
When switching on the phone without a SIM card inserted in the phone,
the screen displays a request for inserting SIM card. In this status, the
phone only support emergency calls. You can input emergency numbers
and press <Voice call> to call.
The phone can be switched on during charging. When the phone
displays startup information, the phone can be switched on.
If the phone automatically turns off because of low battery level, startup
information may be displayed after several minutes of charging.
Switchon
1. Press and hold Power key on top for 2 seconds.
2. If necessary, enter the lock code/PIN, and press confirm key to
verify.
3. When you power on the phone for the first time, the screen displays
default standby picture. If the phone is not powered on for the first
time, the screen displays custom standby picture.
4. To set your phone, refer to “Function menu - Settings”.

9
When you switch on the phone, it may recognize the SIM card
provider and configure the correct text message and network settings
automatically. If not, contact your service provider for the correct settings.
Switchoff
1. Press and hold Power key on top for 4 seconds.
2. After animation showed, the phone is switched off.
If the phone is switched off, all features are not available except the
alarm alert and charge.
Displayandkeys
Display
zStatus indicator: Displays phone status: signal status, battery
status, message status, in-coming calls, profile status, function
status and inserted external equipments.
zStandby information: Name of service provider, date and day, time,
a.m. or p.m. (12H).
Standby information
Wallpaper
Function indicator
Status indicator

10
zWallpaper: Default wallpaper.
zSoftkey function indicator: Mainmenu，Phone，Contacts，Browser。
Press function key to enter.
Keys
Power key: Open or close handset
Volume key: handset volume adjust
Screen lock key: Press 2 secs on idle to lock screen
Mainmenu key: Back to mainmenu directly in function operation process
Camera key: Capture on camera and camcoder process
Send key:Accept voice/video call
End key: End voice/video call
Except above key，handset control by screen finger touch mainly.
Input method
Handset support English and symbol input.
Input method support multiple-press English enter and association input.
Input method support number enter,symbol and dial pad enter.
Use multiple-press input
According to the order of letter in a key, press for respective times, and
input the letter.
1. On text enter status.Example: create a new text message.
2. If you need enter “Phone”, please click once, twice,
third time, twice, twice.
3. Click highlight to switch capital,the enter staus is capital now. If
need to normail, still click to retrieve normal status.
4. Click to switch number enter status.
5. Click to switch symbol keypad, and use to turn to
select symbol which you need.
Use association input
Association input is a predictive text input mode based on a built-in