manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. VEVOR
  6. •
  7. Cutter
  8. •
  9. VEVOR 8102E-8L User manual

VEVOR 8102E-8L User manual

Support and E-Warranty Certificate https://www.vevor.com/support
TILE CUTTER
MODEL:8102E-8L
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to themajor
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
8102E-8L
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before
operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Tile Cutter
8102E-8L
- 2 -
SPECIFICATIONS
Model
8102E-8L/32"
8102E-8L/40"
8102E-8L/48"
Maximum
Cutting Length
800mm
1000mm
1200mm
Maximum
Cutting
Thickness
15mm
15mm
15mm
Cutting Wheel
Size
Φ22*Φ6*6mm
SAFETY INFORMATION
Symbol
Symbol Description
Warning - To reduce the risk of injury, user must read instructions
manual carefully.
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to
an accident. To reduce the risk of injury, fire, or electrocution,
please follow the recommendation below.
Warning- Be sure to wear eye protectors when using this product.
Warning- Be sure to wear gloves when using this product.
Warning
Read and understand all instructions before using this tile cutter. The
operator must follow basic precautions to reduce the risk of personal injury and/or
damage to the equipment.
- 3 -
Please familiarize yourself with the hazard notices found in this manual. Anotice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
WORK AREA
1.Operate in a safe work environment. Keep your work area clean, well-lit and free
of distractions.
2. Keep anyone not wearing the appropriate safety equipment away from the work
area.
3. Store new tools properly in a safe and dry location to prevent rust or damage.
Lock tile cutter away and keep out of the reach of children.
4. Always place the tile cutting machine on a level and firm surface.
PERSONAL SAFETY
WARNING!
Wear personal protective equipment approved by the Canadian Standards
Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection for the
eyes. Eye protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1
standards based on the type of work performed.
2. Wear gloves that provide protection based on the work materials or to reduce
the effects of tool vibration.
3. Caution! The edges of cut tiles are sharp.
PERSONAL PRECAUTIONS
Control the tile cutter, personal movement and the work environment to avoid
personal injury or damage to tile cutter.
1. Do not operate any tile cutter when tired or under the influence of drugs, alcohol
or medications.
2. Avoid wearing clothes or jewelry that can become entangled with a tool's
moving parts. Keep long hair covered or bound.
- 4 -
SPECIFIC SAFETY PRECAUTIONS
1. The tile cutting machine is fitted with replaceable circular blade. Keep the tile
cutter and blade away from children.
2. Use the correct tile cutter for the job. This tile cutter was designed for a specific
function. Do not modify or alter this tile cutter or use it for an unintended purpose.
3.After use, the machine must be stored in a safe and dry place.
4.This machine has been designed for cutting and breaking ceramic, glazed,
porcelain, and polished tile, and which surface must be flat. Shall not be used for
any other purpose.
WARNING!
DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to the tile cutter safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
WARNING!
Direct exposure of pressurized air or fluids to skin could result in severe bodily
injury.
SAVE THESE INSTRUCTIONS
①Cutter *1PCS
②Ruler *1PCS
③AAA Battery*2PCS
④Spare Cutting Wheel
Φ22xΦ6x6mm *1PCS
①
②
③
④
Insert
Fix
Install Battery
Cap
Turn on/ off
- 5 -
Operation
Straight Cutting
□
1
Place the cutting wheel on the rear edge of the tile.
Make sure the breaker is upward to magnet on the sliding bar.
Slide the wheel forward by pushing the handle down with medium pressure.
Scoring the tile surface glaze as the handle is pushed forward.
It is important to make one continuous motion, scoring the surface only once per
time.
□
2
After scoring and without moving the tile position, the breaker is slightly in the front
edge of the tile and front stop.
- 6 -
Raise the handle a little and release the breaker so that the breaker is flat on the
tile.
Apply increasing pressure on the handle until the tile snaps along the score line.
Tips: After scoring, it is better to pull back the handle to let the breaker slightly
backtrack 5-10mm, it's the best position to break the tile.
Tips: Do not press in the middle or the end.
Diagonal Cutting
□
1
Put tile on the machine against the adjusted angle ruler.
5-10mm
- 7 -
Place the cutting wheel on the rear edge of the tile.
Slide the wheel forward by pushing the handle down with medium pressure.
Scoring the tile surface glaze as the handle is pushed forward.
It is important to make one continuous motion, scoring the surface only once per
time.
After scoring and without moving the tile position, the breaker is slightly in the front
edge of the tile and front stop.
Raise the handle a little and release the breaker so that the breaker is flat on the
tile.
Apply increasing pressure on the handle until the tile snaps along the score line.
Tips: After scoring, it is better to pull back the handle to let the breaker slightly
backtrack 5-10mm, it's the best position to break the tile.
Use Screwdriver to replacement the blade
5-10m
- 8 -
Laser Device Instruction
2, If the laser is biased to the left,
adjust the No. 2 screw clockwise or
the No. 1 screw counterclockwise.
3, If the laser is biased to the right,
adjust the No. 1 screw clockwise or
the No. 2 screw counterclockwise.
4, When the laser irradiation is too
far/high, adjust the No. 3 and 4
screws clockwise.
5, When the laser irradiation is too
close/low, adjust the No. 3 and 4
screws counterclockwise.
1, There are four screws for the laser
device.
2pcs of AAA batteries are required, please
turn off the power when not in use.
If the battery is exhausted, replace it.
- 9 -
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to USA: Sanven Technology Ltd., Suite 250, 9166Anaheim Place,
Rancho Cucamonga, CA 91730
Made In China
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Support and E-Warranty Certificate
https://www.vevor.com/support

This manual suits for next models

3

Other VEVOR Cutter manuals

VEVOR KH-375 User manual

VEVOR

VEVOR KH-375 User manual

VEVOR AY-420 User manual

VEVOR

VEVOR AY-420 User manual

VEVOR HS-325A User manual

VEVOR

VEVOR HS-325A User manual

VEVOR CT-174 User manual

VEVOR

VEVOR CT-174 User manual

VEVOR QTJ-J002 User manual

VEVOR

VEVOR QTJ-J002 User manual

VEVOR CT-650 User manual

VEVOR

VEVOR CT-650 User manual

VEVOR YT-160AS User manual

VEVOR

VEVOR YT-160AS User manual

VEVOR SL-400 Installation instructions

VEVOR

VEVOR SL-400 Installation instructions

VEVOR J1G-ZB-355B User manual

VEVOR

VEVOR J1G-ZB-355B User manual

VEVOR RC-16 User manual

VEVOR

VEVOR RC-16 User manual

VEVOR k110D User manual

VEVOR

VEVOR k110D User manual

VEVOR 10190010215 User manual

VEVOR

VEVOR 10190010215 User manual

VEVOR 8103E-2/17 User manual

VEVOR

VEVOR 8103E-2/17 User manual

Popular Cutter manuals by other brands

Cembre TC085 Operation and maintenance manual

Cembre

Cembre TC085 Operation and maintenance manual

GreenTec GT 155 Operator's manual

GreenTec

GreenTec GT 155 Operator's manual

Bush Hog TOUGH 2715L Specifications

Bush Hog

Bush Hog TOUGH 2715L Specifications

Alpha tools FSM 180/1 operating instructions

Alpha tools

Alpha tools FSM 180/1 operating instructions

Ilsco TASKMASTER TOOLS TB-CUT40CU-IS instruction manual

Ilsco

Ilsco TASKMASTER TOOLS TB-CUT40CU-IS instruction manual

Berner BOT STARLOCK PLUS Original instructions

Berner

Berner BOT STARLOCK PLUS Original instructions

Profitech Diamant SC 350-6 instruction manual

Profitech Diamant

Profitech Diamant SC 350-6 instruction manual

Battipav 70760 operating instructions

Battipav

Battipav 70760 operating instructions

Guarda EDGE Operator's manual

Guarda

Guarda EDGE Operator's manual

Maruyama QC-E owner's manual

Maruyama

Maruyama QC-E owner's manual

Evolution DISCCUT1 Original instructions

Evolution

Evolution DISCCUT1 Original instructions

Silca Delta 2000 MC operating manual

Silca

Silca Delta 2000 MC operating manual

Han-Bond HB Series User guideline

Han-Bond

Han-Bond HB Series User guideline

Stiga 95 COMBI owner's manual

Stiga

Stiga 95 COMBI owner's manual

Baileigh Industrial PT-105HD Operator's manual

Baileigh Industrial

Baileigh Industrial PT-105HD Operator's manual

Makita BCS550 instruction manual

Makita

Makita BCS550 instruction manual

Land Pride RCR1860 Series Operator's manual

Land Pride

Land Pride RCR1860 Series Operator's manual

Maktec MT242 instruction manual

Maktec

Maktec MT242 instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.