VEVOR HRAT24A Installation instructions

SANDBAG / SPEED SANDBAG
SUPPORT MANUAL

01
SANDBAG / SPEED SANDBAG
SUPPORT MANUAL
NEED HELP? CONTACTUS!
Have product questions? Need technical suppo?
Please feel free to contact us:
CustomerSe[email protected]
IMPORTANT :Be sure to review the contents of this manual before
attempting to operate the equipment. This manual should be
located where all machine users can easily reference it.
HRAT24A

02
IMPORTANT PRECAUTONS
PART LIST
FOR HOUSEHOLD USE ONLY
WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS.
SAVE THESE INSTRUCTIONS
Read all instructions before using this Treo Boxing Stand. It is the
responsibility of the owner to ensure that all users of this Boxing Stand are
adequately informed of all warnings and precautions.
• Close supeision is necessa when this Boxing Stand is used by, on, or
near children or disabled persons.
• Use this appliance (or Boxing Stand) only for its intended use as described
in this manual. Do not use heavy bags weighing more than 50kg.
• Never drop or inse any object into any hole.
• The Boxing Stand is intended for home use only. Do not use this Boxing
Stand in any commercial, rental, school or institutional setting. If you don't
comply this, the warranty will expire.
• Do not use outdoors.
• Keep the Treo Boxing Stand indoors, away from moisture and dust. Place
the Treo Boxing Stand on a leveled suace, with a mat beneath it to protect
the oor or carpet. Make sure that there is enough clearance around the Treo
Boxing Stand to mount, dismount, and use the Treo Boxing Stand.
• Keep hands and feet away from moving pas.
At NO time should pets or children under the age of 12 be closer to
the Boxing Stand than 3 m (10 feet). At NO time should children under
the age of 12 use the Boxing Stand. Children over the age of 12 should
not use the Boxing Stand without adult supeision.
No. Q’ty No. Q’tyPa NamePa Name
1 171 9Bolt M10*65Rear Base Tube
2 182 2Bolt M10*60Side Base Tube
3191 17Nut M10Upright Tube
4 202 4Flat Washer M6Front Base Tube
5 211 4Spring Washerφ6Heavy Bag Tube
6221 4Screw M6*30Speed Bag Platform Rack
7231 4Bolt M10*70Suppo Bar (Right)
8 241 1Bolt M10*50Suppo Bar (Left)
9 254 1Eye Bolt M10*120Weight Peg
10 261 1Big Washer M10Horizontal Suppo Bar
11 272 4Foot Cap 45*45U-type Connecting Plate
12 281 1Outside Plug 50-45Speed Bag Swivel
13 291 1Plug 38*38Speed Bag Platform
14 301 1Plug 45*45Pop Pin
15 34 31 4Plug φ25
32 1Speed Ball
Flat Washer M10
16 2Bolt M10*150

03
1
1pc
2
2pcs
3
1pc
4
2pcs
5
1pc
6
1pc
7
1pc
8
1pc
9
4pcs
10
1pc
11
2pcs
12
1pc
4pcs 2pcs
282725
1pcM10 M10 BIG
26
1pc
2pcs
1615
34pcs
13
1pc
14
1pc M10*150M10
9pcs 2pcs 17pcs 4pcs
201917 18
M10*65 M10*60 M10 M6
4pcs 4pcs 4pcs
24
1pc
2321 22
M10*50M10*70M6*30
M6 spring
washer
4pcs 1pcφ25
31 3229
1pc
30
1pc45*4538*38
Note: The Pas In red serial number are pre-assembled by the manufacturer.

04
DRAWING ASSEMBLY
Step 1
Step 2
04
23
27
18
15
19
18
15
19
15
01
16
19
03
02
04
27
02
03
11
15
17
19
15
11
05
23
19 15
13
29
06
14
28
25
26
19
30
15
24
22
21
20
12
19
15

05
PHYSICAL ASSEMBLY
Step 3
19
15
1517
07
08
15
19
05
15
17
15
17
15
17
09
01
15
17
19
15
19
10
19
15
15
17
09
04
31
09
Step 1: Install the base (Pas 1, 2, 3, 4).

Step 2: Install the Speed Ball (Pas 12, 13, 32) attached to the Center Tube
(Pas 5, 6, 14).
Step 3: Connect to the base and center tube (Pas 11), install the suppo
bar and weight hook (Pas 7, 8, 9, 10, 25 ).

E-mail: CustomerSe[e-mail]