VEVOR WC30 User manual

Support and E-Warranty Certificate https://www.vevor.com/support
INSTRUCTIONS FOR TOOL CABINET
ASSEMBLY
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:WC30
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Tool Cabinet
Assembly

- 2 -
Please read instructions carefully before assembly.
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
Assembly Parts List
Part
Description
Qty
1
Left side panel
1
2
Right side panel
1
3
Back panel
1
4
Top cover
1
5
Bottom
1
6
Shelf
1
7
Door
1
8
Wall Hang panel
2

- 3 -
Tools are required for assembly:
1. Phillips screwdriver.
2.Rubber mallet.
Safety Tips:
1.Lay a soft cloth or paper on the floor before assembly to prevent the floor from
scratching the parts.
2.The maximum load of each layer after assembly is 120 LBS.
3. The weight limit of each object is 40lbs
Part
Description
Qty
9
Hang top panel
1
10
Hang bottom panel
1
11
Gas spring
2
12
Bolt-M3x6
12
13
Bolt-M6x15
34
14
Screw-ST6.3*38
10
15
Rubber plug 8*40mm
10
16
Positioning board
1

- 4 -
Table of Parameters
Items
Description
Name
Tool Cabinet
Model
WC30
External dimensions
770×318×500 mm
30.3×12.5×19.7 inch
Package Size
850×590×135 mm
G.W.
15.5 kg
Instructions for Installation
STEP 1
Insert back (3)into the buckles of left side plate(1) and right side plate(2). Then use
gelatin hammer to flap until the alignment at the top and secure them with bolt-
M6*15(13).
(3) Back
(1) Left side
(13) Bolt
(2) Right side
panel

- 5 -
STEP 2
Step 2: Align bottom’s(5) and hang bottom panel’s(10) holes to left and right side
panel’ bottom holes, and secure them with (13)M6x15.
(11) Bolt M6x15
(5) Bottom
(10)hang bottom panel

- 6 -
STEP 3
Do the same to top cover(4) and hang top panel(9), secure them with
bolt-M6x15(13).
(4) Top cover
(9) Hang top panel
(13) Bolt M6x15

- 7 -
STEP 4
Tilt the shelf (6) into the box, place the shelf from top to bottom, and insert the left,
right and back sides of the shelf into the left and right side panels and the
backplane hanging brackets at the appropriate height. The installation is complete.
(6) Shelf

- 8 -
STEP 5
As shown in the figure, first insert the dowel on the top left of the door into the left
side panel hole, and then insert the dowel on the top right of the door into the right
panel hole.
(7)Door

- 9 -
STEP 6
Before installing the gas spring (11), it is necessary to disassemble the spring
support (as shown in the figure), install the base and the pressure rod of the
support on the door panel and the box body respectively, lock and fix them with the
11-word large flat head screw M3x6, and then fix the base and pressure rod of the
spring support with the removed screws.
(11) Gas spring
(12) Bolt M3x6

- 10 -
STEP 7
As shown in the figure, first paste the positioning board (16) on the wall to draw the
positioning line and drill holes, then install the rubber plug (15) into the wall with
drilled holes, and then align the mounting hole of the wall hang plate(8) with the
installation hole of the rubber plug and use the screw-ST6.3x38(14)to lock and fix .
Manufacturer：Zhongshan City CYZ Coating Tech.Co.,Ltd.
Address：Plant1,No.78,Zhongheng Avenue,Baoyu Village, Henglan Town,
Zhongshan City,Guangdong Province,China
MADE IN CHINA
Screw ST6.3*38
Wall Hang panel
Positioning board
Concrete wall
Rubber plug 8*40mm

Support and E-Warranty Certificate https://www.vevor.com/support