VEVOR 4X3X2.75 User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
SPRAY PAINT BOOTH
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

1
MODEL:4X3X2.75 / 6X3X2.5 / 7X4X2.75
8X4.5X3.3 / 8.5X4.8X3.3 / 10X6X4
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
SPRAY PAINT
BOOTH

2
1、Safe Instructions
WARNING:
1) Avoid using this product in rain, strong wind, hail, and other bad weather.
2) Avoid sharp points, blades, and other items to scratch the product.
3) Keep away from fire sources.
4) The air inside the tent is scarce, so good ventilation must be ensured when
painting inside the tent.
5）Due to the large size of this product, installation requires 2 to 4 people to
assist.
CAUTION: Carefully read instructions and procedures for safe operations.

3
2、 PRODUCT INTRODUCTION
4X3X2.75 6X3X2.5 7X4X2.75 8X4.5X3.3 8.5X4.8X3.3 10X6X4
Size 13*10*9ft 20*10*8ft 23*13*8.5ft 26*15*11ft 28*16*11ft 33*20*13ft
Material
210D
Oxford-
fabric
210D
Oxford-
fabric
210D
Oxford-
fabric
210D
Oxford-
fabric
210D
Oxford-
fabric
210D
Oxford-
fabric
Color Blue Blue Blue Blue Blue Blue
Input
voltage
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
120V~
60Hz(USA)
220-240V~
50Hz(EUR/
AUS)
Inflation
blower
power
950W 750W 750W 950W 950W 1100W
Ventilation
blower
power
/480W
(USA)
480W
(USA)
750W
(USA)
750W
(USA)
950W
(USA)
/550W(EUR
/AUS)
550W(EUR
/AUS)
750W(EUR
/AUS)
750W(EUR
/AUS)
950W(EUR
/AUS)
G.W 25.4kg 36.2kg 44.4kg 56kg 57.4kg 74.6kg
N.W 21.6kg 31kg 39kg 50kg 51.2kg 67.6kg
Model
SPEC.

4
3、 PACKAGE CONTENT
4X3X2.75
6X3X2.5
7X4X2.75
8X4.5X3.3
8.5X4.8X3.3
10X6X4
Spray paint
booth
×1
×1
×1
×1
×1
×1
inflation
blower
×1
×1
×1
×1
×1
×1
Ventilation
blower
/
×1
×1
×1
×1
×1
Storage bag
×1
×1
×1
×1
×1
×1
Sand bags
×4
×4
×4
×4
×4
×6
Stakes
×4
×4
×4
×4
×4
×6
Ropes
×4
×4
×4
×4
×4
×6
Pack of repair
patches
×1
×1
×1
×1
×1
×1
model
Parts

5
4. PRODUCT DIAGRAM
1. Front Door 2. Air Column
3. Light Hook 4. Ceiling
5. Rope Ring 6. Activated Carbon Filter Cotton
7. Handle 8. Ventilating Tube
9. Air Column Filling Tube 10.Air Blower
11. Transparent Window 12. Emergency Escape Window
13. Double Filter Cotton 14. Exhaust Zipper Port
15. Bottom 16. Metal Ring
17. Power Line Inlet

6
5.INSTALLATION INSTRUCTION
1. Unfold the tent and
spread it out on a clean
and level ground.
2.Zip up both sides of the
product.
3. Tie the rope to the
rope ring.
4. Tie the air tube to the
air blower outlet, as
shown in the figure. 1 is
the ventilation blower; 2
is the inflation blower.
5. When the tent is
inflated, please fasten
the tent with stakes at the
bottom metal rings.
6. When the assembly is
complete, please tie the
windproof rope to the
fixed object.

7
6、Storage Instruction
It is recommended to store the product when it is dry to avoid dampness and
mildew.
It is recommended to put them in a storage bag and store them in a dry
environment.
Keep away from sharp objects to avoiding scratching.
After wet weather, it is recommended to air the tent on sunny days.
1.Unzip and open the
front and back doors.
2. Turn off the air
blowers and open both
exhaust zipper ports.
3. Drain all air and
flatten the tent as
shown below.
4. Roll up the tent, as
shown in the figure
5. Roll up the tent with
ropes.
6. Put it into a storage
bag and place in dry
environment.

8
7 Direction for Use
1) This product is only a simple tool room for painting and can not be used in
windy and rainy days.
2) The product requires the blower to keep inflating , and do not to cut off the
power supply.
3) In case of power failure, please escape through the front door or safety window
or back door.
4) In case of emergency, you can cut through the tent with a knife to escape.
5) It is recommended to choose a flat and clean open ground to use this product.
6) If the tent shakes too much in the wind, please use the windproof ropes and
stakes to fix the tent.
7) After repeated use, the ventilation of the tent may become poor. At this time,
the inner blue filter cotton can be removed or replaced to improve the ventilation.
8) If it is difficult to inflate the tent, zip up the front and back doors, turn on the
Ventilation blower to inflate the tent, and then turn on the Inflation blower to fully
inflate the tent.

9
8.Maintenance, Repair, and Troubleshooting
1) When the product is finished, it is recommended to dry the tent and put it away.
2) If the product is stored in a humid environment, it is recommended to take it out
to open it in sunny weathers.
3) If the product is torn, please repair it with the accompanying material and tools.
Troubleshooting
problem
cause
solution
Blower does
not work
·Voltage mismatch
·No power supply
·The blower switch is not on
·Voltage need to match
·Turn the power
·Turn on the blower
Lack of tent
pressure
·Voltage instability
·The air tube is connected to
a wrong blower
·Both exhaust ports are not
zipped properly
·Supply a stable voltage
·Connect the air tube to the
inflation blower
·Zip both sides of the exhaust
ports
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Made in China
Manufacturer: Guangzhou Yijia Inflatable Co., Ltd
Add: No. 1, Lirong Road, Shiling Town, Huadu District, Guangzhou, China