3. Preface
This paint barrel is composed of inlet balloon valve switch, air pressure regulating
valve, safety valve and discharge port. All parts are made of the best materials,
and have passed strict quality control, and the appearance is treated with baking
paint, so it can achieve the purpose of durability.
Notes
After spraying with this product, it must be thoroughly cleaned to extend the
service life of the product.
Warnings
1. Children or persons with physical disabilities are prohibited from using this
product, and persons who do not know how to use it safely are prohibited from
operating this product.
2. This product 10L allows the paint to be pressurized to 60PSI, and the maximum
operating pressure must not exceed 70PSI, otherwise it will cause the risk of
personal safety.
3. The safety valve on the pressure barrel is used to protect the normal pressure
in the pressure barrel, avoid overpressure of a safety device, before the product
leaves the factory has been set within the allowable pressure range, in the normal
state of use, do not remove at will, do not adjust at will.
4. This product should not do any form of modification, do not do any dangerous
operations such as drilling, welding, etc., which may produce tempering effect,
resulting in damage to the pressure barrel, affecting the service life of the product.
5. It is strictly forbidden to pour strong acidic and alkaline liquid into this product to
avoid corrosive tank and cause personal injury.
How to use
Before use, please make sure that there can be no residual pressure in the
pressure barrel, if there is residual pressure, the operator can pull open the Red
Hat safety valve bleed pull ring on the pressure barrel lid to completely release the
air pressure inside the pressure barrel to ensure safety.
1. After loosening the butterfly bolt, open the pressure barrel lid
