VEVOR LM20 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
LOG TONGS
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
LM20
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
LOG TONGS

2
WARNING
Read and understand all instructions. Failure to follow all instructions may result in
serious injury or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible
conditions or situations that could occur. Exercise common sense and caution when
using the tongs. Always be aware of the environment and ensure that the tongs are
used in a safe and responsible manner.
Do not allow persons to operate or assemble the tongs until they have read this
manual and have developed a thorough understanding of how they work.
Do not modify the tongs in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the tongs. There are specific
applications for which the tongs were designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the
work of larger industrial equipment. There are certain applications for which this
equipment was designed. It will be a safer experience and do the job better at the
capacity for which it was intended. DO NOT use the tongs for a purpose for which they
were not intended.
Industrial or commercial applications must follow OSHA requirements.
WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep your work area clean, dry, free of clutter,
and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the tongs in
confined work areas may put you dangerously close to cutting tools and rotating parts.
Keep children and bystanders away from the work area while operating the tongs. Do
not allow children to handle the tongs.

3
WARNING
PERSONAL SAFETY
Stay alert, watch what you are doing, and use common sense when operating the
tongs. Do not use them while you are tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating the tongs may result in serious
personal injury.
Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.
Wear the proper personal protective equipment when necessary. Use ANSI Z87.1
compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a
dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves,
dust collection systems, and hearing protection when appropriate. This applies to all
persons in the work area.
Do not overreach. Keep proper footing and balance at all times
⚠CAUTION
TONGS USE AND CARE
Do not force the tongs. Products are safer and do a better job when used in the
manner for which they are designed. Plan your work, and use the correct product for
the job.
Check for damaged parts before each use. Carefully check that the tongs will operate
properly and perform the intended function. Replace damaged or worn parts
immediately. Never operate the tongs with a damaged part.
Store the tongs when they are not in use. Store in a dry, secure place out of the reach
of children. Inspect the tool for good working condition prior to storage and before
re-use.
Use only accessories that are recommended by the manufacturer for use with your
tongs. Accessories that may be suitable for one product may create a risk of injury hen

4
used with another tool. Never use an accessory that has a lower operating speed or
operating pressure than the tool itself.
Keep guards in place and in working order. Never operate the tongs without the
guards in place.
Specific Operation Warnings
WARNING
Do not exceed the rated load capacity.
Do not stand under or near while load is suspended.
Before Each Use
WARNING
Before using the tongs, be sure all bolts are fastened and tightened.
Operating Instructions
WARNING
Do not exceed the load capacity of the tongs.
WARNING
The tongs allow for use with a ½ inch chain on a tractor bucket. Use the chain passes
through the swivel grab with the clevis fastening.
Maintenance
Maintain the tongs by adopting a program of conscientious repair and maintenance.
It is recommended that the general condition of any tool be examined before it is used.
Keep your tongs in good repair. Keep them clean, dry, and free from oil and grease.

5
Technical Specifications
LM20
Weight Capacity
Max. 0.05 ton (110 lbs.)
Jaw Opening
3 inches-21 inches
Material thickness（in.）
1/5 inches

6
Part List:
Assembly Complete
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made in China

Technical Support and E-Warranty Certificate
www.vevor.com/support