Viatek RENU-IT PRO Series Manual

888-7 VIATEK
RENU-IT PRO USE TABLE
SAFETY PRECAUTIONS
model RE02
viatekproducts.com 888-7VIATEK 407.248.0123 1viatekproducts.com 888-7VIATEK 407.248.0123 2
A. B.
For customer service call 888.7.VIATEK or visit us online at viatekproducts.com
Pour le service a la clientele appelez le 888.7.VIATEK ou visitez viatekproducts.com
6881 Kingspointe Pkwy Ste 7
Orlando, FL 32819
407.248.0123
US • MX • UK
worldwide
© 2008 VIATEK CONSUMER PRODUCTS GROUP, INC. All specifications and prices are subject to change without notice. All rights reserved.
Viatek No Question Protection - Protect your product with Viatek Warranty Services. Product is replaced or reimbursed 100%.
Protection for 1-year beyond our standard warranty, No shipping charges, no deductibles, Your product is protected from any
mechanical or electrical failures caused by power surges or manufacturer’s defects. Just $5.95, order online at viatekproducts.com
today.
Para servicio al consumidor llame al 888.7.VIATEK o visite viatekproducts.com
GREAT PRODUCTS, VIATEKPRODUCTS.COM
DC SOCKET
LED LIGHT (9V BATTERY)
CHARGING (9V BATTERY) POWER LIGHT
BATTERY SELECTION SWITCH
+POLE
LCD DISPLAY
LED INDICATORS
BATTERY CHARGER BAY
-POLE
Battery TYPE Function LED Indication LCD display word LCD capacity Indication
Discharge Orange DIS Blinking downward
Charging Red CHA Flashing upward
Ni-Cd
Fully charged Green OK Fully charged
Charging Red CHA Flashing upward
Ni-MH
Fully charged Green OK Fully charged
Charging Red CHA Flashing upward
Alkaline
Fully charged Green OK Fully charged
Ni-Cd
Ni-MH
Alkaline
Battery voltage
is very low
short
Battery can’t rechar
ge
Off BAD
To reduce the risk of fire, electric shock or injury when using any
electric appliance precautions should be made, including but not limited to:
This unit is for USE ONLY as directed in directions.
Always unplug prior to cleaning or performing any type of service.
To clean the exterior of the unit, use a mild solution and or
dishwasher safe detergent with water.
If device appears to be damaged DO NOT USE.
Use device only as described in the instructions.
DO NOT operate the unit where there is flammable or combustible
products or where other flammable vapors are present.
Any attempt to open the unit will void the warranty.
NEVER handle the unit with wet hands.
DO NOT insert any objects in the unit. Keep unit free of hair, dirt, etc.
CAUTION - To Reduce The Risk of Fire or Electric Shock, Use
Indoors Only. See Instructions
CAUTION – High Voltage, Keep out of Reach of Children
RENU-IT
TM
PRO SERIES
Professional
Grade Disposable
Battery Regenerator
Regenerates :
AA, AAA,
C, D &
9-V
DIRECTIONS FOR USE
Read instructions
Before Operating
MADE IN CHINA

USING THE RENU-IT PRO CHARGING TIMES
viatekproducts.com 888-7VIATEK 407.248.0123 3
ADDITIONAL INFORMATION
viatekproducts.com 888-7VIATEK 407.248.0123 5
viatekproducts.com 888-7VIATEK 407.248.0123 4
NOTE:Only one battery chemistry can be charged at one time.
STEP 1: Connect the AC adaptor to the power.
STEP 2: Insert the AC adaptor plug into the DC socket
STEP 3: Select the correct battery chemistry, Ni-Cd, Ni-MH or alkaline
STEP 4: Insert the batteries into the charger, aligning each with the correct
polarity.
STEP 5: After inserting the batteries the LEDs will flash for approximately 2
seconds, then Renu-It Pro will automatically detect the status of the
and indicate the status on the LED screen.
STEP 6: The LCD will display“DIS” as it begins to discharge the battery, LED
will light orange at the same time.When the discharging process is
done, the battery will transfer to charge status automatically, and
LCD display“CHA”, LED will light red at the same time.When the
battery is fully charged, the LCD will display “OK”, battery bar on LCD
display a full battery shape, and LED will light green.
NOTE:Ni-MH and Alkaline batteries do not have memory;The Renu-It Pro
will automatically start to charge, (LCD display“CHA”)
B attery Type B attery size B attery capacity C harge time
A A A 400mA h 0.7H
A A 800mA h 1.4H
C 2200mA h 3.9H
N i-C d
D 4400mA h 7.7H
A A A 800mA h 1.4H
A A 2300mA h 4H
C 3300mA h 5-8H
Ni-M H
D 5000mA h 8H
A A A 1.5V <1.4V 2.5H
A A 1.5V <1.4V 5H
C 1.5V <1.4V 6H
A lkaline
D 1.5V <1.4V 10H
9V block 200mA h 7H
Charging time is different according to different brand and capacity of
the battery, the formula below can be applied for reference.
Battery capacity x1.4 = charging time
The Renu-It Pro can only charge is only
Ni-Cd (Nickel Cadmium) and the
Ni-MH (Nickel Metal Hydride) and
alkaline battery.
Don’t use extension cable for connection of the device.
Pay attention to the correct polarity during
inserting battery.
Store at room temperature. Extreme temperatures can
damage the unit.
Clean the dust before using to ensure a good connection.
Don’t use damaged or corroded battery into the charger.
300 mAh batteries can never be charged over 0.5 hours.