Victrola HI-RES User manual

HI-RES
QUICK START
GUIDE
V P T-15 0 0
V P T-2 50 0

CAREFULLY REMOVE THE
TAPED GUIDE STRING
AND USE THE STRING TO
STRETCH THE BELT OVER
THE MOTOR SPINDLE.
ONCE THE BELT IS
INSTALLED AROUND THE
MOTOR SPINDLE, DISCARD
THE GUIDE STRING AND
PLACE THE SLIPMAT ON
THE PLATTER.
TURNTABLE SETUP
SET THE SLIPMAT ASIDE
AND PLACE THE PLATTER
ONTO THE TURNTABLE.
ROTATE THE PL ATTER
UNTIL THE HOLE WITH THE
GUIDE STRING IS DIRECTLY
OVER THE MOTOR SPINDLE
AS SHOWN.

INSERT THE HEADSHELL
INTO THE TONEARM
AND TIGHTEN THE
TONEARM COLLAR
COUNTER-CLOCKWISE
UNTIL THE HEADSHELL
IS SECURE.
TURNTABLE SETUP
ORTOFON 2M SERIES:
(VPT-2500)
PUSH THE STYLUS
COVER TAB DOWN /
FORWARD AND GENTLY
SLIDE THE COVER OFF.

AUDIO TECHNICA
VM95 SERIES:
(VPT-1500)
GENTLY PULL THE COVER
OFF OF THE CARTRIDGE.
SLIDE THE COUNTERWEIGHT
ONTO THE TONEARM
UNTIL THE FRONT OF THE
COUNTERWEIGHT IS
ALIGNED WITH THE BACK
GROOVE ON THE TONEARM.
Note: Remove the two
foam blocks from the
tonearm before installing
the counterweight.

33
45
USE THE SPEED SELECTOR
KNOB TO SELECT YOUR
RECORD SPEED.
PLACE THE 45 RPM
ADAPTER ON THE SPINDLE
NEXT TO THE SPEED
CONTROL TO STORE
WHEN NOT IN USE.
ONCE ALIGNED WITH THE
CORRECT GROOVE, TURN
THE TOP SCREW
CLOCKWISE TO TIGHTEN
THE COUNTERWEIGHT.
Note: You may need to
adjust the anti-skate if you
notice distortion, skipping,
or looping during playback.

TURNTABLE
QUICK START
LED COLOR GUIDE
BLUETOOTH MODE
Ready To Pair
flashing blue
Connected
solid blue (2 sec)
then solid white
RCA MODE
flashes white (3x)
then solid white
OPERATION GUIDE
POWER ON
single press button
POWER OFF
press and hold button
(1 sec)
SWITCH OUTPUT
single press button
switch between RCA output
and Bluetooth output