Videotec MAXIMUS MVXHD User manual

EN
English - Instruction manual
IT
Italiano - Manuale di istruzioni
FR
Français - Manuel d’instructions
DE
Deutsch - Bedienungsanleitung
RU
 - Руководство по эксплуатации
PT
Português - Manual de instruções
KO
한국어 - 지침 설명서
ENGLISH
MAXIMUS MVXHD
High-spec ex-proof HD camera in a compact design
Manual B

EN
English - Instruction manual
ENGLISH
MAXIMUS MVXHD
High-spec ex-proof HD camera in a compact design
Manual B

Instruction manual - English - EN
3MNVCMVXHDCAM_1813_EN
Contents
ENGLISH 1
1 About this manual ......................................................................................................... 5
1.1 Typographical conventions.................................................................................................................................. 5
2 Notes on copyright and information on trademarks.................................................. 5
3 Identication.................................................................................................................. 5
3.1 Product marking ...................................................................................................................................................... 5
4 Installation ..................................................................................................................... 6
4.1 Range of use.............................................................................................................................................................. 6
4.2 Connection of the power supply line............................................................................................................... 6
4.3 Connection of the Ethernet cable...................................................................................................................... 7
4.4 Signal cable connection........................................................................................................................................ 7
4.4.1 Alarm and relay connections............................................................................................................................................... 7
4.4.1.1 Connecting an alarm with dry contact ................................................................................................................................................. 8
4.4.1.2 Relays connection......................................................................................................................................................................................... 8
4.5 Washing system connection................................................................................................................................ 8
5 Switching on .................................................................................................................. 9
5.1 Before powering the product in an explosive atmosphere...................................................................... 9
5.2 First start-up............................................................................................................................................................... 9
5.3 Software interface.................................................................................................................................................10
5.3.1 Minimum system requirements.......................................................................................................................................10
5.3.2 Conguration procedure through software................................................................................................................10
5.3.3 Installing the software.........................................................................................................................................................10
5.4 Web interface ..........................................................................................................................................................12
5.4.1 Home Page...............................................................................................................................................................................12
5.4.2 User Controls page................................................................................................................................................................13
5.4.3 Device Parameters Page......................................................................................................................................................14
5.4.4 Device Statistics page..........................................................................................................................................................14
5.4.5 Network Conguration page ............................................................................................................................................14
5.4.6 User Conguration page.....................................................................................................................................................15
5.4.7 Digital I/O Page.......................................................................................................................................................................15
5.4.8 Wiper..........................................................................................................................................................................................15
5.4.9 Washer page............................................................................................................................................................................15
5.4.10 Encoder Parameters page................................................................................................................................................16
5.4.11 Camera Settings page.......................................................................................................................................................16
5.4.12 Tools Page ..............................................................................................................................................................................18
5.4.13 Video Analysis Page............................................................................................................................................................18
6 Accessories................................................................................................................... 18
7 Instructions for normal operation.............................................................................. 18
7.1 Enabling the wiper (Wiper)................................................................................................................................18
7.2 Enabling the washer (Washer)..........................................................................................................................18
7.3 Special controls ......................................................................................................................................................19
8 Maintenance ................................................................................................................ 20
8.1 Firmware updating................................................................................................................................................20

EN - English - Instruction manual
4 MNVCMVXHDCAM_1813_EN
8.1.1 Factory Default .......................................................................................................................................................................20
9 Information on disposal and recycling...................................................................... 20
10 Troubleshooting ........................................................................................................ 21
11 Technical data ............................................................................................................ 22
11.1 Cameras..................................................................................................................................................................22

Instruction manual - English - EN
5MNVCMVXHDCAM_1813_EN
1 About this manual
Read all the documentation supplied carefully before
installing and using this unit. Keep the manual in a
convenient place for future reference.
1.1 Typographical conventions
DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
INFO
Description of system specications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The mentioned names of products or companies are
trademarks or registered trademarks.
3 Identication
3.1 Product marking
See the label attached to the product.

EN - English - Instruction manual
6 MNVCMVXHDCAM_1813_EN
4 Installation
CAUTION! Device installation and
maintaining must be performed by
specialist technical sta only.
The external multi-polar cable shield
(armature) must be earthed.
All disconnected wires must be electrically
isolated.
The product comes with a multi-polar cable
or a cable tail for coupling purposes. When
installing the device with the multi-polar
cable, keep at least 250mm free space from
the bottom of the housing to allow for the
minimum curvature radius of the multi-
polar cable.
4.1 Range of use
For installation indoors and outdoors.
Installation temperature: from -40°C (-40°F) up to
+60°C (140°F).
Operating temperature:
• Cold start from -40°C to +65°C.
• Operation from -50°C to +65°C.
Relative humidity: from 10% up to 95% (no
condensation).
4.2 Connection of the power
supply line
Electrical connections must be performed
with the power supply disconnected and
the circuit-breaker open.
When commencing installation make sure
that the specications for the power supply
for the installation correspond with those
required by the device.
Check that the power supply is adequately
dimensioned.
The device can be provided with dierent power
supply voltages. The power supply voltage is
indicated on the product identication label. (3.1
Product marking, page5).
The multicore cable has the power and earth cables
inside.
Perform the connections following the instructions
reported in the table .
CONNECTION OF THE POWER SUPPLY LINE
Power supply 24Vac/ 24Vdc/ 12Vdc
Colour Terminals
Black 1 (+) L (Phase)
Black 2 (-) N (Neutral)
Yellow/Green
Tab. 1

Instruction manual - English - EN
7MNVCMVXHDCAM_1813_EN
4.3 Connection of the Ethernet
cable
The Ethernet cable shield must always be
earthed via the connector. Always use a
shielded RJ45 connector.
Use of Ethernet cables with the following
characteristics is highly recommended:
• STP (shielded)
• Category 5E (or higher)
The product can be directly connected to an Ethernet
switch.
Carry out the connections as described in the table
(according to the standard specications: TIA/EIA-
568-B).
CONNECTION OF THE ETHERNET CABLE
Pin number Cable color
1 Orange-White
2 Orange
3 Green-White
4 Blue
5 Blue-White
6 Green
7 Brown-White
8 Brown
Tab. 2
The example below shows a typical installation.
Switch
Personal
Computer
Fig. 1
4.4 Signal cable connection
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
SIGNAL CABLE CONNECTION
Colour Function
White RS-485 A (+)
Yellow RS-485 B (-)
Pink Relay 1, Terminal A
Violet (blue, cable
tail version)
Relay 1, Terminal B
Red (brown, cable
tail version)
Alarm/Digital input
Green GND/Common alarm
Grey Reset
Tab. 3
4.4.1 Alarm and relay connections
The external relay and alarm cable shield
must be earthed.
The unit is equipped with the alarms and relays
indicated in the table (Tab. 3, page7).

EN - English - Instruction manual
8 MNVCMVXHDCAM_1813_EN
4.4.1.1 Connecting an alarm with dry contact
In case of free contact alarm make the connection as
shown in the gure.
AL1 COM
dry contact
Fig. 2AL1: Alarm 1. COM: Common alarms.
The dry contact alarm can be NO (normally open) or
NC (normally closed).
For further information refer to the relative chapter (
5.4.7 Digital I/O Page, page15).
4.4.1.2 Relays connection
The relays are usable with the specications
described below. Working voltage: up
to 15Vac or 30Vdc. Current: 1A max. Use
suitable cable sections with the following
characteristics: from 0.25mm² (23AWG) up
to 1.5mm² (16AWG).
Due to the absence of polarity, both terminals of
the same relay can be used equally with either
alternating or continuous current.
For further information refer to the relative chapter (
5.4.7 Digital I/O Page, page15).
4.5 Washing system connection
For further details on conguration and
use, refer to the relative manual.