Videotec ULISSE RADICAL THERMAL User manual

ENGLISH ITALIANO FRANÇAIS DEUTSCH
РУССКИЙ
EN
English - Instructions manual
IT
Italiano - Manuale di istruzioni
FR
Français - Manuel d’instructions
DE
Deutsch - Bedienungslanleitung
RU
 -   
ULISSE RADICAL THERMAL
Thermal PTZ camera with up to 24x continuous zoom

EN
English - Instructions manual
ENGLISH
ULISSE RADICAL THERMAL
Thermal PTZ camera with up to 24x continuous zoom

Instructions manual - English - EN
3MNVCUPKT_1520_EN
Contents ENGLISH
1 About this manual ......................................................................................................... 7
1.1 Typographical conventions.................................................................................................................................. 7
2 Notes on copyright and information on trademarks.................................................. 7
3 Safety rules..................................................................................................................... 7
4 Identication................................................................................................................ 10
4.1 Product description and type designation...................................................................................................10
4.2 Product markings ..................................................................................................................................................10
4.2.1 Checking the markings .......................................................................................................................................................10
5 Preparing the product for use .................................................................................... 11
5.1 Safety precautions before use...........................................................................................................................11
5.2 Unpacking................................................................................................................................................................11
5.3 Contents....................................................................................................................................................................11
5.4 Safely disposing of packaging material.........................................................................................................11
5.5 Preparatory work before installation..............................................................................................................12
5.5.1 Attaching the bracket..........................................................................................................................................................12
5.5.2 Cables management ............................................................................................................................................................12
6 Installation ................................................................................................................... 13
6.1 Connecting the cables to the base..................................................................................................................13
6.2 Fixing the base to the support..........................................................................................................................14
6.3 Connector board description............................................................................................................................14
6.4 Connection of the power supply line.............................................................................................................15
6.4.1 24Vac power line connection............................................................................................................................................16
6.4.2 120Vac and 230Vac power line connection.................................................................................................................16
6.4.3 Connection of the alarm inputs and relays..................................................................................................................17
6.5 Connection of the Ethernet cable....................................................................................................................17
6.6 Video cable connection.......................................................................................................................................17
6.7 Fixing the upper body..........................................................................................................................................18
6.8 Hardware conguration......................................................................................................................................19
6.8.1 Opening the conguration door .....................................................................................................................................19
6.8.2 DIP1 conguration................................................................................................................................................................19
6.8.3 DIP2 conguration................................................................................................................................................................19
6.8.4 DIP3 conguration................................................................................................................................................................20
6.8.4.1 Address conguration...............................................................................................................................................................................20
6.8.4.2 Setting of the serial communication lines.........................................................................................................................................20
6.8.5 DIP4 conguration................................................................................................................................................................20
7 Switching on ................................................................................................................ 21
8 Conguration............................................................................................................... 22
8.1 OSM interface (On Screen Menu).....................................................................................................................22
8.1.1 Using the OSM........................................................................................................................................................................22
8.1.1.1 How to use the joystick.............................................................................................................................................................................22
8.1.1.2 How to move around the menus..........................................................................................................................................................23
8.1.1.3 How to modify the parameters..............................................................................................................................................................23

EN - English - Instructions manual
4 MNVCUPKT_1520_EN
8.1.1.4 How to change the numeric elds .......................................................................................................................................................24
8.1.1.5 How to change text....................................................................................................................................................................................24
8.1.2 Conguration via OSM.........................................................................................................................................................26
8.1.3 Main Menu...............................................................................................................................................................................26
8.1.4 Language Selection Menu .................................................................................................................................................26
8.1.5 ZFI Parameter Menu .............................................................................................................................................................26
8.1.5.1 Zone Titling Menu ......................................................................................................................................................................................27
8.1.5.2 Zone Masking Menu..................................................................................................................................................................................28
8.1.6 Housing Serial Port Menu...................................................................................................................................................29
8.1.7 Polarity Menu..........................................................................................................................................................................29
8.1.8 Movement Menu...................................................................................................................................................................30
8.1.8.1 Manual Control Menu...............................................................................................................................................................................30
8.1.8.2 Manual Control Menu (Limits) ...............................................................................................................................................................31
8.1.8.3 Preset Menu..................................................................................................................................................................................................31
8.1.8.4 Preset Menu (Edit Preset).........................................................................................................................................................................31
8.1.8.5 Preset Menu (Utility Preset).....................................................................................................................................................................32
8.1.8.6 Patrol Menu...................................................................................................................................................................................................32
8.1.8.7 Autopan Menu.............................................................................................................................................................................................32
8.1.8.8 Motion Recall Menu...................................................................................................................................................................................33
8.1.9 Display Menu ..........................................................................................................................................................................33
8.1.10 Digital I/O-Options Menu.................................................................................................................................................34
8.1.10.1 Alarms Menu..............................................................................................................................................................................................34
8.1.11 Default Menu........................................................................................................................................................................35
8.1.12 Info Menu...............................................................................................................................................................................35
8.1.13 Thermal Camera menu......................................................................................................................................................36
8.1.13.1 Status Menu ...............................................................................................................................................................................................37
8.1.13.2 Measuring Point menu...........................................................................................................................................................................37
8.1.13.3 Video Setup Menu....................................................................................................................................................................................37
8.1.13.4 Flat Field Correction Menu....................................................................................................................................................................38
8.1.13.5 Gain Switch Values...................................................................................................................................................................................39
8.1.13.6 Digital Data Enhancement menu.......................................................................................................................................................39
8.1.13.7 Automatic Gain Correction (AGC) menu..........................................................................................................................................40
8.1.13.8 ROI Setup Menu........................................................................................................................................................................................41
8.1.13.9 Plateau AGC parameters menu...........................................................................................................................................................42
8.1.13.10 Linear AGC parameters menu...........................................................................................................................................................42
8.1.13.11 Manual AGC parameters menu ........................................................................................................................................................43
8.1.13.12 Auto Bright AGC parameters menu ................................................................................................................................................43
8.1.13.13 Once Bright AGC parameters menu................................................................................................................................................44
8.1.13.14 Information AGC parameters menu................................................................................................................................................44
8.1.13.15 Isotherm menu .......................................................................................................................................................................................44
8.2 Web interface ..........................................................................................................................................................45
8.2.1 Home..........................................................................................................................................................................................45
8.2.2 User Controls...........................................................................................................................................................................46
8.2.3 Device Parameters.................................................................................................................................................................47
8.2.4 Device Statistics .....................................................................................................................................................................47
8.2.5 Network Conguration........................................................................................................................................................47
8.2.6 User Conguration................................................................................................................................................................48
8.2.7 Movement Parameters........................................................................................................................................................48
8.2.7.1 Autopan .........................................................................................................................................................................................................49
8.2.7.2 Patrol ...............................................................................................................................................................................................................49
8.2.7.3 Motions Recall..............................................................................................................................................................................................49
8.2.8 Preset Parameters..................................................................................................................................................................49

Instructions manual - English - EN
5MNVCUPKT_1520_EN
8.2.9 Preset Parameters (Advanced)..........................................................................................................................................49
8.2.10 Digital I/O...............................................................................................................................................................................50
8.2.11 Camera Parameters ............................................................................................................................................................51
8.2.12 Tools.........................................................................................................................................................................................51
8.2.13 Thermal Camera menu......................................................................................................................................................51
8.2.14 Factory Default.....................................................................................................................................................................52
9 Accessories................................................................................................................... 52
9.1 Wall mount...............................................................................................................................................................52
9.2 Parapet bracket ......................................................................................................................................................52
10 Instructions for normal operation ........................................................................... 53
10.1 Visualizing the state of the pan & tilt............................................................................................................53
10.2 Saving a Preset .....................................................................................................................................................53
10.3 Restore a Preset position (Scan).....................................................................................................................53
10.4 Recalling the Home position...........................................................................................................................53
10.5 Patrol enabling.....................................................................................................................................................53
10.6 Autopan enabling...............................................................................................................................................54
10.7 Unit Reboot ...........................................................................................................................................................54
10.8 Special controls....................................................................................................................................................55
10.9 Special congurations.......................................................................................................................................56
11 Maintenance .............................................................................................................. 57
11.1 Fuses replacement..............................................................................................................................................57
12 Cleaning ..................................................................................................................... 57
12.1 Window and plastic cover cleaning..............................................................................................................57
12.2 Cleaning the germanium window................................................................................................................57
13 Disposal of waste materials...................................................................................... 57
14 Troubleshooting ........................................................................................................ 58
15 Technical data ............................................................................................................ 59
15.1 General....................................................................................................................................................................59
15.2 Mechanical.............................................................................................................................................................59
15.3 Electrical .................................................................................................................................................................59
15.4 Lenses......................................................................................................................................................................59
15.5 Video........................................................................................................................................................................59
15.6 Camera....................................................................................................................................................................59
15.7 Network ..................................................................................................................................................................60
15.8 Network protocols..............................................................................................................................................60
15.9 Environment..........................................................................................................................................................60
15.10 Certications ......................................................................................................................................................60
16 Technical drawings .................................................................................................... 61
A Appendix - Address table ........................................................................................... 62

EN - English - Instructions manual
6 MNVCUPKT_1520_EN

Instructions manual - English - EN
7MNVCUPKT_1520_EN
1 About this manual
Before installing and using this unit, please read this
manual carefully. Be sure to keep it handy for later
reference.
1.1 Typographical conventions
DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
DANGER!
Hot surface.
Avoid contact. Surfaces are hot and may
cause personal injury if touched.
DANGER!
Mechanical hazard.
Risk of crushing or shearing.
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
INFO
Description of system specications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The quoted names of products or companies are
trademarks or registered trademarks.
3 Safety rules
CAUTION! The electrical system to which
the unit is connected must be equipped
with a 20A max automatic bipolar circuit
breaker. This circuit breaker must be of
the Listed type. The minimum distance
between the circuit breaker contacts must
be 3mm (0.1in). The circuit breaker must be
provided with protection against the fault
current towards the ground (dierential)
and the overcurrent (magnetothermal).
CAUTION! Hazardous moving parts. Keep
ngers and other body parts away.
CAUTION! Device installation and
maintaining must be performed by
specialist technical sta only.
CAUTION! For continued protection against
risk of re, replace only with same type and
rating of fuse. Fuses must be replaced only
by service personnel.
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of re,
only use UL Listed or CSA certied cables
with sections greater than or equal to
0.13mm² (26 AWG).
• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected with great care. The manufacturer,
however, cannot take any liability for its use. The
same thing can be said for any person or company
involved in the creation and production of this
manual.

EN - English - Instructions manual
8 MNVCUPKT_1520_EN
• Before starting any operation, make sure the
power supply is disconnected.
• Be careful not to use cables that seem worn or old.
• Never, under any circumstances, make any
changes or connections that are not shown in
this handbook. Improper use of the appliance
can cause serious hazards, risking the safety of
personnel and of the installation.
• Use only original spare parts. Non-original spare
parts could cause re, electrical discharge or other
hazards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specication by examining the
identication labels (4.2 Product markings, page
10).
• Installation category (also called Overvoltage
Category) species the level of mains voltage
surges that the equipment will be subjected to.
The category depends upon the location of the
equipment, and on any external surge protection
provided. Equipment in an industrial environment,
directly connected to major feeders/short branch
circuits, is subjected to Installation Category III. If
this is the case, a reduction to Installation Category
II is required. This can be achieved by use of an
insulating transformer with an earthed screen
between primary and secondary, or by tting UL
listed Surge Protective Devices (SPDs) from live
to neutral and from neutral to earth. Listed SPDs
shall be designed for repeated limiting of transient
voltage surges, suitable rated for operating voltage
and designated as follows: Type 2 (Permanently
connected SPDs intended for installation on the
load side of the service equipment overcurrent
device); Nominal Discharge Current (In) 20kA min.
For example: FERRAZ SHAWMUT, STT2240SPG-
CN, STT2BL240SPG-CN rated 120Vac/240Vac,
(In=20kA). Maximum distance between installation
and reduction is 5m.
• This device was designed to be permanently
secured and connected on a building or on a
suitable structure. The device must be permanently
secured and connected before any operation.
• Use a Class 2 listed UL tranformer, compliant with
the Standards in force, only for products marked
UL, powered at 24Vac.
• A power disconnect device must be included
in the electrical installation, and it must be very
quickly recognizable and operated if needed.
• The separate protective earthing terminal provided
on this product shall be permanently connected
to earth.
• Connect the device to a power source
corresponding to the indications given on the
marking label. Before proceeding with installation
make sure that the power line is properly isolated.
The supply voltage should never exceed the limit
(±10%).
• Power supply must be provided with a SELV type,
24Vac, 8A isolated source derived from a double
isolation UL Listed transformer specially protected
in output.
• The device should be mounted so that it is
accessible only to the technician/installer because
the moving parts constitute a residual risk of injury
caused by movement of said parts.
• Attach the Dangerous Moving Parts label near the
device. (Fig. 2, page11).
• Do not use the appliance in the presence of
inammable substances.
• To connect the power supply line use the
appropriate junction-box (UPTJBUL). For further
information, refer to the product use and
installation manual.

Instructions manual - English - EN
9MNVCUPKT_1520_EN
• Do not allow children or unauthorised people to
use the appliance.
• Only skilled personnel should carry out
maintenance on the device. When carrying out
maintenance, the operator is exposed to the risk of
electrocution and other hazards.
• Use only the accessories indicated by the
manufacturer. Any change that is not expressly
approved by the manufacturer will invalidate the
guarantee.
• Before connecting all the cables make sure the
device is properly connected to the earth circuit.
• If the device has to be removed from the
installation, always disconnect the earth cable last.
• Take all necessary precautions to prevent the
apparatus from being damaged by electrostatic
discharge.
• The unit has been made for connection using a
3-pole cable. To make a correct connection to
the earth circuit, follow the instructions in this
handbook.
• Handle the unit with great care, high mechanical
stress could damage it.
• Make especially sure that the power supply line is
insulated at a sucient distance from all the other
cables, including lightning protection devices.
• If it is necessary to transport the device, this should
be done with great care. Abrupt stops, bumps and
violent impact could damage the unit or injure the
user.

EN - English - Instructions manual
10 MNVCUPKT_1520_EN
4 Identication
4.1 Product description and type
designation
ULISSE RADICAL THERMAL is the rst Videotec ready
to use thermal PTZ camera system that integrates
exceptional factory-assembled combinations of lens
and thermal camera for the best intrusion detection
and the visual awareness in total darkness or extreme
environmental conditions.
The lens system features a continuous zoom up to
24x and an amazing AUTO FOCUS that allow quick
and eective focus on targets while retaining awless
images.
ULISSE RADICAL THERMAL is provided with analog
control or IP, certied ONVIF Prole S, and is
compatible with most VMS on the market .
The Videotec's PTZ ASSISTANT plug-in software
supports any VMS with the control of all special
functions such as the Auto Focus.
Depending on temperature, the contrast of a scene
can be adjusted dynamically by the ACE (Active
Contrast Enhancement) function, while the Digital
Detail Enhancement (DDE) allows more detailed and
crisp images.
The STR (Spot Temperature Reading) function detects
the temperature reading of a specic point of the
monitored scene.
Due to its accuracy, reliability and robustness, this
thermal PTZ camera is the ideal solution for the
visual control of demanding outdoor areas, such
as: re detection, military installations, border
patrol, harbour surveillance, perimeter surveillance,
trac, railways and highways control and industrial
monitoring.
4.2 Product markings
Pan & tilt devices have a label complying
with CE markings.
Fig. 1
The label shows:
• Model identication code (Extended 3/9 bar code).
• Power supply (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Weatherproof standard (IP).
• Serial number.
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specication by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.

Instructions manual - English - EN
11MNVCUPKT_1520_EN
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
The unit must not be dismantled or
tampered with. The only exceptions
are those concerning the assembly and
maintenance operations stipulated in this
manual.
5.1 Safety precautions before use
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 2
5.2 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Unpack the sunshield of the device, taking
care not to damage the housing.
5.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Power supply base
• Accessories package:
• Serial adapter
• Serial extension cable
• Allen wrenches
• Label
• Ties
• Silicon sheath
• Instructions manual
• Bolts and screws
• Sunshield
5.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.

EN - English - Instructions manual
12 MNVCUPKT_1520_EN
5.5 Preparatory work before
installation
5.5.1 Attaching the bracket
Dierent types of supports are available (9
Accessories, page52). Choose a suitable bracket for
the installation and follow all the instructions in the
suggested chapter.
Take special care when attaching and
fastening down the apparatus. The
clamping system must be able to support
at least 4 times the weight of the entire
equipment, including P&T, lenses and
camera.
The device should be assembled vertically.
Any other position could impair the
performance of the appliance.
Do not attach the device upside down.
5.5.2 Cables management
The connection cables should not be
accessible from the outside. It is necessary
to fasten the cables securely to the support
in order to prevent excessive weight pulling
them out accidentaly.
You must use cables suited to the type of
installation.
Insert the cables into the support so that they
protrude by about 50cm.
50cm50cm
Fig. 3

Instructions manual - English - EN
13MNVCUPKT_1520_EN
6 Installation
Never, under any circumstances, make
any changes or connections that are not
shown in this handbook. Failure to follow
the connection instructions that are given
in the handbook may create serious safety
hazards for people and for the installation.
Do not change the wiring in the product
as it is supplied to you. Failure to follow
this instruction may create serious safety
hazards for people and for the installation,
and will also invalidate the guarantee.
Inside the bottom cover there is a desiccant
bag that is used to prevent moisture
formation in the base and near the
connector boards. Remove the bag before
installation.
6.1 Connecting the cables to the
base
Insert the cables into the cable glands holding the
base at about 20cm from the support. Tighten the
cable glands. The cable glands are suitable for cables
with a diameter between 5mm and 10 mm.
Fig. 4
Pay attention to the xing. Tightening
torque: 5Nm.
For cables diameter from 3mm to 7mm use
the supplied gaskets.
Fig. 5

EN - English - Instructions manual
14 MNVCUPKT_1520_EN
6.2 Fixing the base to the support
Use the screws and the washers supplied
with the base.
Once you have positioned the gasket (01), x the
base (02) onto the bracket (03) with screws (04),
serrated washers (05) and screw rings (06).
01 03
06
05
04
02
Fig. 6
01
03
06
05
04
02
Fig. 7
Align the 3 notches on the base with those on the
support as shown in the following gure.
Fig. 8
Apply a thread-locker on the holes of the
screws (Loctite 243®).
Pay attention to the xing. Tightening
torque: 4Nm.
6.3 Connector board description
CONNECTOR BOARD DESCRIPTION
Connector/
Component
Function
CN1 Board power supply
CN4 Signal cables
Ethernet Ethernet
F1 Fuse
F2 Fuse
Tab. 1
F1
CN1
F2
CN4 Ethernet
Fig. 9

Instructions manual - English - EN
15MNVCUPKT_1520_EN
6.4 Connection of the power
supply line
Depending on the version, the device can be
provided with dierent power supply voltages. Their
value is shown on the product identication label (4.2
Product markings, page10).
Electrical connections must be performed
with the power supply disconnected and
the circuit-breaker open.
When commencing installation make sure
that the specications for the power supply
for the installation correspond with those
required by the device.
Make sure that the power source and
connecting cables are suitable for the
power consumption of the system.
Earth cable should be about 10mm longer
than the other two, so that it will not be
disconnected accidentally if pulled.
The power supply cable should also be
covered by the silicone sheath (01) supplied
for this purpose. The silicone sheath must
be fastened with the corresponding tie (02).
Fig. 10
CN1
N
L
a
01
02

EN - English - Instructions manual
16 MNVCUPKT_1520_EN
6.4.1 24Vac power line connection
Use a Class 2 listed UL tranformer,
compliant with the Standards in force, only
for products marked UL, powered at 24Vac.
Cut the cables to the correct length and make the
connections. Connect the power supply to the
terminal: CN1.
CN1
24Vac 24Vac
a
Fig. 11
Connect the power supply cables as described in the
table below.
CONNECTION OF THE POWER SUPPLY LINE
Colour Terminals
Power supply 24Vac
Dened by the installer 24Vac
Dened by the installer 24Vac
Yellow/Green
Tab. 2
6.4.2 120Vac and 230Vac power line
connection
Cut the cables to the correct length and make the
connections. Connect the power supply to the
terminal: CN1.
CN1
N L
GND
a
Fig. 12
Connect the power supply cables as described in the
table below.
CONNECTION OF THE POWER SUPPLY LINE
Colour Terminals
Power supply 230Vac
Blue N (Neutral)
Brown L (Phase)
Yellow/Green
Power supply 120Vac
Blue N (Neutral)
Brown L (Phase)
Yellow/Green
Tab. 3

Instructions manual - English - EN
17MNVCUPKT_1520_EN
6.4.3 Connection of the alarm inputs
and relays
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of re,
only use UL Listed or CSA certied cables
with sections greater than or equal to
0.13mm² (26 AWG).
Standard version
O1 C1 O2 C2
V V
Fig. 13 Relay contact connection.
AL4
AL3
AL2
AL1
AGND
Fig. 14 Alarms connection.
Version with LED illuminators
CONNECTION OF THE ALARM INPUTS, OF THE TWILIGHT SWITCH
AND OF THE RELAYS
AL1, AL2, AL3,
AL4 e AGND
Self-powered alarm inputs referred to the AGND
shared terminal
O1-C1 e O2-C2 Clean output contacts, can be activated by alarm or
by user control
Tab. 4
6.5 Connection of the Ethernet
cable
Connect the ethernet cable to the relative connector
(Ethernet, 6.3 Connector board description, page14).
Ethernet
Fig. 15
6.6 Video cable connection
Connect the screen and central cable
respectively to the GND and VIDEO
terminals. The terminals accept cables with
sections between 0.5mm² (20 AWG) and
0.08mm² (28 AWG).
The analog signal video cable must be connected to
the signal cable terminal (CN4, 6.3 Connector board
description, page14).
Fig. 16

EN - English - Instructions manual
18 MNVCUPKT_1520_EN
6.7 Fixing the upper body
Fix the upper body (01) to the base (02) using the
xing screws (03) equipped with gaskets (04). Make
sure the base seal is present and in good condition
(05).
Pay attention to the xing. Tightening
torque: 4Nm.
02
03
05
04
01
Fig. 17
Fig. 18
There is one anchoring position between
the base and upper body. Align side
projections to obtain the correct
positioning.