Videotec NXPTZ DELUX User manual

EN
English - Instruction manual
IT
Italiano - Manuale di istruzioni
FR
Français - Manuel d’instructions
DE
Deutsch - Bedienungsanleitung
RU
Русский - Руководство по эксплуатации
ITALIANO
NXPTZ DELUX
FULL HD PTZ camera for onshore/offshore
applications with new DELUX technology, for day/
night viewing with exceptional night brightness

EN
English - Instruction manual
ENGLISH
NXPTZ DELUX
FULL HD PTZ camera for onshore/offshore
applications with new DELUX technology, for day/
night viewing with exceptional night brightness

Instruction manual - English - EN
3MNVCNXPTZHDB_1905_EN
Contents
ENGLISH 1
1 About this manual ....................................................................................................................5
1.1 Typographical conventions ................................................................................................................................................ 5
2 Notes on copyright and information on trademarks.............................................................5
3 Safety rules................................................................................................................................5
4 Identification.............................................................................................................................8
4.1 Product description and type designation................................................................................................................... 8
4.2 Product marking..................................................................................................................................................................... 8
4.2.1 Checking the markings.......................................................................................................................................................................... 8
5 Preparing the product for use .................................................................................................9
5.1 Safety precautions before use ........................................................................................................................................... 9
5.2 Unpacking................................................................................................................................................................................. 9
5.3 Contents .................................................................................................................................................................................... 9
5.4 Safely disposing of packaging material ......................................................................................................................... 9
5.5 Preparatory work before installation.............................................................................................................................10
5.5.1 Fixing to parapet or ceiling mount..................................................................................................................................................10
5.5.2 Bracket mounting..................................................................................................................................................................................11
5.5.3 Fixing the unit to the pole mount adapter or corner mount adapter................................................................................11
5.5.3.1 Fixing with pole mount.............................................................................................................................................................................................. 11
5.5.3.2 Fixing with corner adapter........................................................................................................................................................................................ 12
5.5.4 Sunshield mounting.............................................................................................................................................................................12
6 Installation ..............................................................................................................................13
6.1 Range of use...........................................................................................................................................................................13
6.2 Methods of installation ......................................................................................................................................................13
6.3 Connection of the power supply line............................................................................................................................14
6.4 Connection of the Ethernet cable..................................................................................................................................14
6.5 Alarm and relay connections ...........................................................................................................................................15
6.5.1 Connecting an alarm with dry contact..........................................................................................................................................15
6.5.2 Relay connection ...................................................................................................................................................................................15
6.5.3 Washing system connection..............................................................................................................................................................15
7 Switching on ...........................................................................................................................15
7.1 First start-up...........................................................................................................................................................................15
8 Configuration..........................................................................................................................16
8.1 Default IP address.................................................................................................................................................................16
8.2 Web interface.........................................................................................................................................................................16
8.2.1 First access to the web pages............................................................................................................................................................16
9 Accessories..............................................................................................................................16
9.1 Washer......................................................................................................................................................................................16
10 Instructions for normal operation ......................................................................................16
11 Maintenance .........................................................................................................................17
11.1 Routine maintenance (to be performed on a periodic basis)............................................................................17
11.1.1 Inspecting the cables.........................................................................................................................................................................17

EN - English - Instruction manual
4 MNVCNXPTZHDB_1905_EN
11.2 Extraordinary maintenance (to be done only under particular circumstances).........................................17
11.2.1 Fuses replacement..............................................................................................................................................................................17
11.2.2 Factory Default.....................................................................................................................................................................................18
12 Cleaning ................................................................................................................................19
12.1 Cleaning the window .......................................................................................................................................................19
12.2 Cleaning the product .......................................................................................................................................................19
13 Information on disposal and recycling...............................................................................19
14 Troubleshooting ...................................................................................................................19
15 Technical data .......................................................................................................................20
15.1 Mechanical ...........................................................................................................................................................................20
15.2 Electrical................................................................................................................................................................................20
15.3 Network.................................................................................................................................................................................20
15.4 Video.......................................................................................................................................................................................20
15.5 I/O interface .........................................................................................................................................................................20
15.6 Cameras.................................................................................................................................................................................21
15.7 Environment........................................................................................................................................................................21
15.8 Certifications - Marine applications ............................................................................................................................21
16 Technical drawings ...............................................................................................................22

Instruction manual - English - EN
5MNVCNXPTZHDB_1905_EN
1 About this manual
Read all the documentation supplied carefully before
installing and using this unit. Keep the manual in a
convenient place for future reference.
1.1 Typographical conventions
DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
DANGER!
Mechanical hazard.
Risk of crushing or shearing.
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The mentioned names of products or companies are
trademarks or registered trademarks.
ONVIF® is a trademark of Onvif, Inc.
3 Safety rules
CAUTION!The electrical system to which the
unit is connected must be equipped with a
15A max automatic bipolar circuit breaker.
The minimum distance between the circuit
breaker contacts must be 3mm (0.1in).
The circuit breaker must be provided
with protection against the fault current
towards the ground (differential) and the
overcurrent (magnetothermal).
A power disconnect device must be
included in the electrical installation, and
it must be very quickly recognizable and
operated if needed.
CAUTION! Hazardous moving parts. Keep
fingers and other body parts away.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
If it is necessary to transport the device,
this should be done with great care. Abrupt
stops, bumps and violent impact could
damage the unit or injure the user.
• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected and verified with great care. The
manufacturer, however, cannot take any liability
for its use. The same thing can be said for any
person or company involved in the creation and
production of this manual.

EN - English - Instruction manual
6 MNVCNXPTZHDB_1905_EN
• Before starting any operation, make sure the
power supply is disconnected.
• Be careful not to use cables that seem worn or old.
• Never, under any circumstances, make any
changes or connections that are not shown in
this handbook. Improper use of the appliance
can cause serious hazards, risking the safety of
personnel and of the installation.
• Use only original spare parts. Non-original spare
parts could cause fire, electrical discharge or other
hazards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels (4.2 Product marking, page 8).
• This device was designed to be permanently
secured and connected on a building or on a
suitable structure. The device must be permanently
secured and connected before any operation.
• A power disconnect device must be included
in the electrical installation, and it must be very
quickly recognizable and operated if needed.
• This is a Class A product. In a domestic
environment this product may cause radio
interference. In this case the user may be required
to take adequate measures.
• Use a Class 2 listed UL tranformer, compliant with
the Standards in force, only for products marked
UL, powered at 24Vac.
• Installation category (also called Overvoltage
Category) specifies the level of mains voltage
surges that the equipment will be subjected to.
The category depends upon the location of the
equipment, and on any surge voltage protection
provided. Equipment in an industrial environment,
directly connected to major feeders/short branch
circuits, is subjected to Installation Category
III. If this is the case, a reduction to Installation
Category II is required. This can be achieved by
use of an insulating transformer with an earthed
screen between primary and secondary windings,
or by fitting UL listed Surge Protective Devices
(SPDs) from live to neutral and from neutral to
earth. Listed SPDs shall be designed for repeated
limiting of transient voltage surges and the
following rated operation conditions: Type 2 (SPDs
permanently connected to the power network and
intended for installation on the load side of the
service equipment); Nominal Discharge Current
(In) 20kA min. For example: FERRAZ SHAWMUT,
STT2240SPG-CN, STT2BL240SPG-CN rated
120Vac/240Vac, (In=20kA). Maximum distance
between installation and reduction is 5m.

Instruction manual - English - EN
7MNVCNXPTZHDB_1905_EN
• Equipment intended for installation in Restricted
Access Location performed by specialist technical
staff.
• To comply with the main supply voltage dips and
short interruption requirements, use a suitable
Uninterruptable Power Supply (UPS) to power the
unit.
• The safety earthing system must be carried out
according to local installation dispositions.
• The separate protective earthing terminal provided
on this product shall be permanently connected
to earth.
• For continued protection against risk of fire,
replace only with same type and rating of fuse.
Fuses must be replaced only by service personnel.
• Connect the device to a power source
corresponding to the indications given on the
marking label. Before proceeding with installation
make sure that the power line is properly isolated.
The supply voltage should never exceed the limit
(±10%).
• The appliance includes moving parts. Make sure
that the unit is positioned where it is inaccessible
under normal operating conditions. Attach the
warning label supplied with the appliance, placing
it near the unit so that it can be seen easily.
• Attach the Dangerous Moving Parts label near the
device. (Fig. 2, page 9).
• Do not use the appliance in the presence of
inflammable substances.
• Only skilled personnel should carry out
maintenance on the device. When carrying out
maintenance, the operator is exposed to the risk of
electrocution and other hazards.
• Use only the accessories indicated by the
manufacturer. Any change that is not expressly
approved by the manufacturer will invalidate the
guarantee.
• Before connecting all the cables make sure the
device is properly connected to the earth circuit.
• If the device has to be removed from the
installation, always disconnect the earth cable last.
• Take all necessary precautions to prevent the
apparatus from being damaged by electrostatic
discharge.
• Handle the unit with great care, high mechanical
stress could damage it.
• Make especially sure that the power supply line is
insulated at a sufficient distance from all the other
cables, including lightning protection devices.

EN - English - Instruction manual
8 MNVCNXPTZHDB_1905_EN
4 Identification
4.1 Product description and type
designation
NXPTZ DELUX is a Full HD PTZ camera which
integrates new imaging and encoding technology for
outdoor video surveillance, allowing recordings to
be produced with incredibly bright and vivid colours
both by day and by night.
In addition to improved light sensitivity with
outstanding colour reproduction and greater noise
reduction, DELUX technology gives advanced new
performance in terms of proportional zoom control
and management of privacy masking for sensitive
areas.
The Full HD PTZ camera is entirely manufactured
in stainless steel AISI 316L and does not require
maintenance. Resistance to corrosion is guaranteed
and improved by a double surface polishing process
and guarantees high performance for use in highly
corrosive environments such as industrial and
offshore/onshore marine environments.
NXPTZ DELUX integrates a Day/Night, Full HD
camera, 1080p with a 30x optical zoom and a frame
rate of 60fps. It is capable of accurately pinpoint
details in any scene – even dynamic, rapidly changing
situations.
The video images are sent via the network with
compression H.264/AVC, MPEG4, MJPEG or JPEG
and up to a maximum of 3 simultaneous and
independent Full HD video streams.
An equally noteworthy point is that the IP66/IP67/
IP68 ratings guarantee the complete protection
against harsh weather and immersion in up to 1
metre of water for 2 hours. Moreover the IP69 rating
allows the device to be cleaned with high pressure
and high temperature water jets.
The NXPTZ series products are Lloyd's Register
Type Approval System Test Specification Number 1
certified and therefore can be used in Marine and
Offshore applications for environmental categories
ENV1, ENV2, ENV3 and ENV5 (eg. passenger ships,
open-air decks, closed spaces and technical areas
that may be subject to heat generated by other
equipment, docking procedures).
4.2 Product marking
The product has a label applied in
compliance with CE marking.
Fig. 1
The label shows:
• Model identification code.
• Supply voltage (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Protection degree (IP).
• Serial number.
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.

Instruction manual - English - EN
9MNVCNXPTZHDB_1905_EN
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
5.1 Safety precautions before use
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 2
5.2 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Sunshield
• Bolts and screws
• Wash system kit
• Label (CAUTION: Hazardous moving parts)
• Supplies box:
• Allen wrench
• Instruction manual
5.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.

EN - English - Instruction manual
10 MNVCNXPTZHDB_1905_EN
5.5 Preparatory work before
installation
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
Use appropriate tools for the installation.
The particular nature of the site where the
device is to be installed may mean special
tools are required for installation.
Choose an installation surface that is
strong enough to sustain the weight of
the device, also bearing in mind particular
environmental aspects, such as exposure to
strong winds.
It should be installed so that no one can be
hit by moving parts. It should be installed
so that moving parts cannot hit other
objects and create hazardous situations.
Make sure the appliance is securely
anchored before supplying power.
For technical services, consult only and
exclusively authorized technicians.
Since the user is responsible for choosing
the surface to which the unit is to be
anchored, we do not supply the fixing
devices for attaching the unit firmly to
the particular surface. The installer is
responsible for choosing fixing devices
suitable for the specific purpose on hand.
It is possible to install the unit with several brackets.
We strongly recommend using only approved
brackets and accessories during installation.
5.5.1 Fixing to parapet or ceiling mount
Attach the adapter (01) to the bottom of the unit
using 4 stainless steel (A4 class 70) socket flat head
cap screw M10 x 20mm (02).
Make sure the thread are free of dirt and debris.
Apply a generous amount of thread locking
compound (Loctite 270) into the threaded holes in
the base of the device.
Pay attention to the fixing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
01
02
Fig. 3
Use the external holes in the adapter to fix the
assembled unit to the parapet or to the ceiling. Use
screws that can bear at least 4 times the weight of
the unit.
Ø 11
8
Ø 238
Ø 200
35
35
35
35
Fig. 4

Instruction manual - English - EN
11MNVCNXPTZHDB_1905_EN
5.5.2 Bracket mounting
The bracket can be fixed to the vertical wall. Use
screws and wall fixing devices that can bear at least
four times the weight of the unit.
Fasten the device to the bracket by using 4 flat
washers, 4 serrated stainless steel washers and
4 stainless steel hex head screws (A4 class 70)
M10x20mm.
Make sure the thread are free of dirt and debris.
Apply a generous amount of thread locking
compound (Loctite 270) on the 4 screws.
Tighten the screws.
Pay attention to the fixing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 5
5.5.3 Fixing the unit to the pole mount
adapter or corner mount adapter
To install the product on a pole or at a wall corner,
first of all fix the unit to the wall bracket (5.5.2 Bracket
mounting, page 11).
5.5.3.1 Fixing with pole mount
Fix the wall bracket to the pole mount adapter
using 4 washers, 4 stainless steel grower washer
and 4 hexagon stainless steel bolts (A4 class 70)
M10x30mm.
Make sure the thread are free of dirt and debris.
Apply a generous amount of threadlocker (Loctite
270) on the 4 threaded holes on the pole mount
adapter.
Tighten the screws.
Pay attention to the fixing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 6

EN - English - Instruction manual
12 MNVCNXPTZHDB_1905_EN
5.5.3.2 Fixing with corner adapter
Fix the wall bracket to the corner mount adapter
using 4 washers, 4 stainless steel grower washers
4 hexagon stainless steel bolts (A4 class 70)
M10x30mm.
Make sure the thread are free of dirt and debris.
Apply a generous amount of threadlocker (Loctite
270) on the 4 threaded holes on the corner module.
Tighten the screws.
Pay attention to the fixing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 7
5.5.4 Sunshield mounting
You can fix the sunshield to the housing using the
screws supplied.
Apply a generous amount of thread locking
compound (Loctite 270) into the threaded holes in
the base of the device.
Pay attention to the fixing. Tightening
torque: 2Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 8

Instruction manual - English - EN
13MNVCNXPTZHDB_1905_EN
6 Installation
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
Before starting any operation, make sure
the power supply is disconnected.
At start up the system makes some
automatic calibration movements: do not
stand near the device when it is powered.
VIDEOTEC strongly recommend to test the
device configuration and performance
before putting it in the final installation
site.
The product is equipped with a multicore
cable that allows connections to be made.
6.1 Range of use
Installation temperature: from -40°C (-40°F) to +60°C
(140°F).
Operating temperature: from -40°C (-40°F) to +60°C
(140°F).
6.2 Methods of installation
The system can be installed only in a standard or
inverted position (ceiling mount). When installed
for inverted operation, the camera orientation and
controller functions are reconfigured for normal
operation through the system’s software.
Hardware adjustment is not required for inverted
operation.
Fig. 9

EN - English - Instruction manual
14 MNVCNXPTZHDB_1905_EN
6.3 Connection of the power
supply line
Electrical connections must be performed
with the power supply disconnected and
the circuit-breaker open.
When commencing installation make sure
that the specifications for the power supply
for the installation correspond with those
required by the device.
Check that the power supply socket and
cable are adequately dimensioned.
Depending on the version, the device can be
provided with different power supply voltages. The
power supply voltage is indicated on the product
identification label. (4.2 Product marking, page 8).
The multicore cable has the power and earth cables
inside.
Perform the connections following the instructions
reported in the table .
CONNECTION OF THE POWER SUPPLY LINE
Cable color Description
Power supply 24Vac
Black 2 (N) Neutral
Black 1 (L) Phase
Yellow/Green Safety earth
Power supply 230Vac
Black 2 (N) Neutral
Black 1 (L) Phase
Yellow/Green Safety earth
Power supply 120Vac
Black 2 (N) Neutral
Black 1 (L) Phase
Yellow/Green Safety earth
Tab. 1
6.4 Connection of the Ethernet
cable
The Ethernet cable shield on the operator
side must always be earthed via the
connector.
Use a shielded RJ45 connector for the crimping of the
Ethernet cable.
Carry out the connections as described in the table
(according to the standard specifications: TIA/EIA-
568-B).
CONNECTION OF THE ETHERNET CABLE
Pin number Cable color
1 Orange-White
2 Orange
3 Green-White
4 Blue
5 Blue-White
6 Green
7 Brown-White
8 Brown
Tab. 2
The example below shows a typical installation.
Switch
Personal
Computer
Fig. 10

Instruction manual - English - EN
15MNVCNXPTZHDB_1905_EN
6.5 Alarm and relay connections
The unit is equipped with the alarms and relays
indicated in the table.
ALARM AND RELAY CONNECTIONS
Cable color Description
Brown-Green Relay, Terminal A
Green-White Relay, Terminal B
Green Common alarm, COM
Brown Alarm 1 (dry contact), AL1
Yellow-White Reset input power supply
Black Reset
Tab. 3
All disconnected wires must be electrically
isolated.
6.5.1 Connecting an alarm with dry
contact
For a dry contact alarm (alarm AL1), implement the
connection as shown in the figure.
AL1 COM
Dry contact
Fig. 11
The dry contact alarm can be NO (normally open) or
NC (normally closed).
For further information refer to the relative chapter
(Web Interface manual, Digital I/O Page).
All alarms have a reach of 200m (656ft)
max, which can be obtained using a
shielded cable with a minimum section of
0.25mm² (23AWG).
6.5.2 Relay connection
The relay is usable with the specifications
described below. Working voltage: to
30Vac or 60Vdc. Current: 1A max. Use
suitable cable sections with the following
characteristics: from 0.25mm² (23AWG) to
1.5mm² (15AWG).
Due to the absence of polarity, both terminals of the
same relay can be connected either to alternating or
direct current voltages.
6.5.3 Washing system connection
For further details on configuration and
use, refer to the relative manual.
When the washing system is enabled, the
relay is used exclusively for the activation
of the pump (Web Interface manual, Washer
System Page).
7 Switching on
The automatic pre-heating (De-Ice) process
could be started whenever the device is
switched on and the ambient temperature
is below 0°C (+32°F). The procedure is
necessary to guarantee correct operation
of the devices even at low temperatures.
The duration ranges depending on
environmental conditions (from 60 minutes
to 120 minutes).
The unit is switched on by connecting the power
supply.
To switch off the unit disconnect the power.
7.1 First start-up
Make sure that the unit and other
components of the installation are closed
so that it is impossible to come into contact
with live parts.
Make sure that all parts are fastened down
firmly and safely.

EN - English - Instruction manual
16 MNVCNXPTZHDB_1905_EN
8 Configuration
8.1 Default IP address
The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).
8.2 Web interface
Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
8.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.
On first access, the Home page will be displayed.
For the configuration of the web interface, please
refer to the instruction manual relating to the
installed firmware version, available on the product
web page on www.videotec.com.
9 Accessories
For further details on configuration and
use, refer to the relative manual.
9.1 Washer
The product can be equipped with an external pump
that provides water to clean the glass.
To complete the installation of the washer use the kit
supplied.
Fig. 12
For further information refer to the relative
chapter (Web Interface manual, Washer
System Page).
10 Instructions for normal
operation
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
If it is left on, the wiper automatically
disables itself.
The device control can be performed through
different modes.
• Through the user's controls of the web interface (
8.2 Web interface, page 16).
• Through Video Management Software (VMS)
that supports the ONVIF protocol. In this case
the Special controls are implemented using the
auxiliary commands of the ONVIF protocol.
• Through PTZ Assistant software (refer to the
manual of the product).

Instruction manual - English - EN
17MNVCNXPTZHDB_1905_EN
11 Maintenance
Before doing any technical work on the
device, disconnect the power supply.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
installation, maintenance and repairs
performed by non-authorised, non-skilled
personnel.
For damage to any parts, repair or
replacement must be done by, or under
supervision of VIDEOTEC.
Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
For all maintenance interventions, we
recommend you return the product to the
laboratory that will perform all required
operations.
When contacting VIDEOTEC for assistance please
provide the serial number and the identification code
of the model.
11.1 Routine maintenance (to be
performed on a periodic basis)
11.1.1 Inspecting the cables
The cables should not show signs of damage or wear,
which could generate hazardous situations. In this
case extraordinary maintenance is necessary.
11.2 Extraordinary maintenance
(to be done only under particular
circumstances)
11.2.1 Fuses replacement
Maintenance must be performed with the
power supply disconnected and the circuit-
breaker open.
CAUTION! For continued protection against
risk of fire, replace only with same type and
rating of fuse. Fuses must be replaced only
by service personnel.
If necessary, the connector board's fuses can be
replaced inside the connection compartment. The
new fuses must comply with the directions given in
the table.
FUSES REPLACEMENT
Supply voltage Fuse (FUS1) Fuse (FUS2)
24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20
120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20
230Vac, 50/60Hz T 1A L 250V 5x20 T 4A H 250V 5x20
Tab. 4
FUS1FUS1 FUS2FUS2
Fig. 13

EN - English - Instruction manual
18 MNVCNXPTZHDB_1905_EN
11.2.2 Factory Default
If the access password is no longer
available, follow the procedure to reset to
default factory settings.
Pay attention to the fixing. Tightening
torque: 2Nm.
To restore the factory settings relative to the network,
user access and camera configuration follow this
procedure:
• Switch off the unit.
• Open the connection compartment.
• Press and hold the reset button (P1, Fig. 14, page
18).
Fig. 14
• Power the unit.
• Wait 30 seconds.
• Release the reset button.
• Wait for 2 minutes.
• Switch off the unit.
• Close the connection compartment.
• Power the unit.
Once the factory default procedure has
terminated, you need to configure the unit
as described in the relevant chapter (8.1
Default IP address, page 16).
It is also possible to perform the reset in remote
mode. Follow the procedure below:
• Switch off the unit.
• Use a clean contact to connect the reset (black
cable) signal and the relative power supply
(yellow/white cable). (6.5 Alarm and relay
connections, page 15).
• Power the unit.
• Wait 30 seconds.
• Open the contact between the reset and the
relevant power supply.
• Wait for 2 minutes.
• Switch off the unit.
• Power the unit.
Once the factory default procedure has
terminated, you need to configure the unit
as described in the relevant chapter (8.1
Default IP address, page 16).