Viega Eco Plus 8152.4 User manual

for urinal with siphon sensor technology
Model Year built:
8152.4 from 06/2015
en_INT
Viega Eco Plus urinal element siphon sensor
technology
Instructions for Use

Viega Eco Plus urinal element siphon sensor technology 2 from 16

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Standards and regulations 6
2.2 Intended use 6
2.2.1 Areas of use 6
2.3 Product description 7
2.3.1 Overview 7
2.3.2 Compatible components 7
2.3.3 Sound protection 8
2.3.4 Technical data 8
2.4 Accessories 8
3Handling 9
3.1 Assembly information 9
3.1.1 Mounting conditions 9
3.1.2 Installation dimensions 9
3.1.3 Required tools 10
3.2 Assembly 10
3.2.1 Mounting the urinal element 10
3.3 Disposal 16
Table of contents
Viega Eco Plus urinal element siphon sensor technology 3 from 16

1 About these instructions for use
Trade mark rights exist for this document, further information can be
found at viega.com/legal .
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nTrained electricians
nDrywall builder
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
About these instructions for use
Viega Eco Plus urinal element siphon sensor technology 4 from 16

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand-
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Viega Eco Plus urinal element siphon sensor technology 5 from 16

2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe.
National regulations can be found on the relevant web site of your
country at viega.com/standards .
Regulations from section: Fields of application / Mounting conditions
Scope / Notice Regulations applicable in Ger-
many
suitable masonry walls EN 1996-1-1
suitable support profiles DIN 18183
Regulations from section: Sound protection
Scope / Notice Regulations applicable in Ger-
many
Fulfilled noise protection require-
ments
DIN 4109
Fulfilled noise protection require-
ments
DIN 4109 (additional sheet 2)
Fulfilled noise protection require-
ments
VDI 4100 SSt I-SSt II
2.2 Intended use
2.2.1 Areas of use
The Viega Eco Plus urinal element "siphon sensor technology"is suit-
able for mounting on masonry wall constructions and support profiles
pursuant to the regulations in section
Ä„Regulations from section:
Fields of application / Mounting conditions“ on page 6 .
The urinal element is intended for use with the equipment set model
8352.2 ÄChapter 2.3.2 „Compatible components“ on page 7 .
Product information
Viega Eco Plus urinal element siphon sensor technology 6 from 16

2.3 Product description
2.3.1 Overview
6
5
4
3
1
2
9
8
7
Fig. 1: Components
1 - urinal installation set
2 - threaded bolts for fixing sanitary objects
3 - adjustable feet
4 - drain elbow
5 - mounting bracket for drain elbow
6 - Viega Eco Plus element (8152.4)
7 - wall plate Rp ½
8 - double nipple R ½
9 - fixing set, model 8173*
* not included in scope of delivery
2.3.2 Compatible components
The urinal element is compatible with the equipment set "Siphon sensor
technology"model 8352.2.
It is suitable for all ceramics with a horizontal connection.
Product information
Viega Eco Plus urinal element siphon sensor technology 7 from 16

2.3.3 Sound protection
The urinal element complies with the noise insulation requirements
specified in section
Ä„Regulations from section: Sound protection“
on page 6 .
2.3.4 Technical data
The product has the following technical data:
drain elbow DN 50
Fitting connection Rp ½
Hole diameter for fixing in wooden
frame construction
11 mm
Maximum height of urinal inlet
from upper edge of the finished
floor
880 mm
2.4 Accessories
The fixing set model 8173 is required to secure.
Required accessories
Product information
Viega Eco Plus urinal element siphon sensor technology 8 from 16

3 Handling
3.1 Assembly information
3.1.1 Mounting conditions
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The urinal element can be extended with the equipment set "Siphon
sensor technology", model 8352.2.
3.1.2 Installation dimensions
Fig. 2: Dimensions
Construction height
Actuation
Urinal element
Handling
Viega Eco Plus urinal element siphon sensor technology 9 from 16

3.1.3 Required tools
ndrill with 10 mm drill bit
nratchet with sockets: 13 mm / 17 mm
nfork or ring spanner: 13 mm / 17 mm / 22 mm
3.2 Assembly
3.2.1 Mounting the urinal element
DANGER!
Danger due to electrical current
An electric shock can lead to burns and serious injury and
even death.
– Work on the electrics may only be carried out by trained
electricians.
– Always de-energise the connection line before work is
commenced.
Masonry and concreted walls
You should use a support bracket (model 8165) when
mounting multiple urinal elements with an interval of
> 490 mm. Observe the instructions for use of the support
bracket when mounting.
Determine and mark fixing points.
nX1: 390 mm (model 8180.73)
nX2: 440 mm (model 8173)
nX3: 1100 mm
Masonry wall
X3
0-200
X1
X2
0
Ø10
Handling
Viega Eco Plus urinal element siphon sensor technology 10 from 16

Drill holes.
Mount the fixing set with the fork spanner (size 13).
Align the height of the urinal element in accordance with the cutting
check.
Determine construction height in accordance with the on-site
marking of the upper edge of the finished floor.
x = Observe the instructions of the urinal manufacturer.
INFO! The construction height must be determined and
adhered to exactly.
There are only limited possibilities available to remedy errors
made during this assembly step,
Ä„Construction height“
on page 9 .
Set the installation depth of the pre-wall element with the fork
spanner (size 17).
Attach urinal element to the floor using the fork spanner (size 13)
and the screws and dowels supplied.
560638_B2
13
1,0 m
0
0-200 mm
x
x
x
x
0
17
17
0-200 mm
x
13
Handling
Viega Eco Plus urinal element siphon sensor technology 11 from 16

Mount drain elbow in mounting bracket.
Secure with a bracket.
Set height of the drain elbow (50 mm)
Mount threaded bolts.
Seal double nipple from one side.
Screw double nipple into the wall plate.
Secure water inlet onto the double nipple.
0
506
50 -100
max. 390
17
22
22
Handling
Viega Eco Plus urinal element siphon sensor technology 12 from 16

Seal supply fitting.
Screw supply fitting into the wall plate.
DANGER! Risk of electric shock. Work on the electrics may only
be carried out by trained electricians.
Lay the electrical cable in the installation set.
Connect water line.
Double-clad urinal element (2 x 12.5 mm).
The urinal element can be installed in support profiles of 50 mm and
75 mm.
Determine the fixing points.
Align element.
Mount drain elbow, double nipple and water inlet.
0
0-200 mm
Mounting in Viega Eco Plus
Handling
Viega Eco Plus urinal element siphon sensor technology 13 from 16

If necessary, adjust the pre-mounted feet from 75 mm to 50 mm:
Pull the foot out and turn by 90°.
Attach urinal element to the floor using the fork spanner (size 13)
and the screws and dowels supplied.
Determine construction height in accordance with the on-site
marking of the upper edge of the finished floor.
Pull urinal element up (cutting check) and align.
x = Observe the instructions of the urinal manufacturer.
INFO! The construction height must be determined and
adhered to exactly.
There are only limited possibilities available to remedy errors
made during this assembly step,
Ä„Construction height“
on page 9 .
Screw the urinal element together laterally with the support profiles.
75 mm
50 mm
13
x
x
1,0 m
0
0-200mm
x
x
4x
4x
Handling
Viega Eco Plus urinal element siphon sensor technology 14 from 16

Connect water line.
DANGER! Risk of electric shock. Work on the electrics may only
be carried out by trained electricians.
Lay the electrical cable in the installation set.
Double-clad urinal element (2 x 12.5 mm).
Align urinal module.
INFO! Observe the ceramic manufacturer's information when
aligning the connections.
If necessary, swap the installation set with the mounting bracket and
the crossbeam of the threaded bolts with each other.
Mount drain elbow, double nipple and water inlet.
Mounting in Viega Steptec
xx
x
x
max. 390
0
0-200 mm
Handling
Viega Eco Plus urinal element siphon sensor technology 15 from 16

Secure the module onto the open side of the Steptec rail with the
slot nuts supplied.
Press the slot nut in gently and secure in the open rail side with a
90° turn.
If necessary, align the height of the urinal element.
Tighten slot nut with a fork spanner (size 17).
Connect water line.
DANGER! Risk of electric shock. Work on the electrics may only
be carried out by trained electricians.
Lay the electrical cable in the installation set.
Clad urinal element (1 x 12.5 mm).
Afterwards, install the sensor technology and the urinal. You will find
information regarding the procedure in the instructions for use of the
equipment set model 8352.2 and of the urinal.
3.3 Disposal
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
Handling
Viega Eco Plus urinal element siphon sensor technology 16 from 16