Viessmann VITOTROL 100 Operating instructions

Operating instructions
for the system user
VIESMANN
Room temperature controller
Type UTDB-RF2
VITOTROL 100
5461 065 GB 1/2014 Please keep safe.

2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These operating instructions are
designed for heating system users.
This appliance can also be operated by
children 8 years and older, as well as by
individuals with reduced physical, sen-
sory or mental faculties or those lacking
in experience and knowledge, provided
such individuals are being supervised or
have been instructed in the safe use of
this appliance and any risks arising from
it.
!Please note
Supervise children in the proxim-
ity of the appliance.
■ Never permit children to play
with the appliance.
■ Cleaning and maintenance
must not be carried out by
unsupervised children.
Connecting the appliance
■ Connection and commissioning of the
appliance may only be carried out by
authorised contractors.
■ Only operate the appliance with suita-
ble fuels.
■ Adhere to the electrical connection
requirements.
■ Modifications to the existing installa-
tion may only be carried out by author-
ised contractors.
Danger
Incorrectly executed work on the
heating system can lead to life
threatening accidents.
■ Work on gas installations must
only be carried out by a regis-
tered gas fitter.
■ Work on electrical equipment
must only be carried out by a
qualified electrician.
Working on the appliance
■ When adjusting settings and carrying
out work on the appliance always fol-
low the guidelines in these operating
instructions.
Additional work on the appliance may
only be carried out by authorised con-
tractors.
■ Never open the appliance.
■ Never remove the cladding.
■ Never remove or change additional
parts or installed accessories.
■ Never open or retighten pipe connec-
tions.
Safety instructions
For your safety
5461 065 GB

3
Danger
Hot surfaces can cause burns.
■ Never open the appliance.
■ Never touch the hot surfaces of
uninsulated pipes, fittings or
flue pipes.
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Do not smoke. Prevent naked
flames and sparks. Do not
switch lights or electrical appli-
ances on or off.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Evacuate any people from the
danger zone.
■ Notify your gas and power sup-
ply utility and your local heating
contractor from outside the
building.
■ Have the power supply to the
building shut off from a safe
place (outside the building).
If you smell flue gas
Danger
Flue gas can lead to life threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the installation site.
■ Close all doors in the living
space.
Emergency contact
If you smell gas or detect a gas leak call
the National Gas Emergency service on
0800 111 999. Notify your gas or elec-
tricity supplier and your heating contrac-
tor.
■ Shut off the electricity supply to the
building from a safe place (outside the
building).
In case of fire
Danger
Fire presents a risk of burns and
explosion.
■ Shut down the heating system.
■ Close the shut-off valves in the
fuel supply lines.
■ Use a tested fire extinguisher,
class ABC.
What to do if the heating system
develops a fault
Danger
Fault messages indicate faults in
the heating system. If faults are
not rectified, they can have life
threatening consequences.
Do not acknowledge fault mes-
sages several times in quick suc-
cession. Inform your heating con-
tractor so the cause can be ana-
lysed and the fault rectified.
Safety instructions
For your safety (cont.)
5461 065 GB

4
Installation room requirements
Danger
Sealed vents result in a lack of
combustion air. This leads to
incomplete combustion and the
formation of life threatening car-
bon monoxide.
Never cover or close existing
vents.
Do not make any subsequent
modifications to the building
characteristics that could affect
safe operation (e.g. cable/pipe-
work routing, cladding or parti-
tions).
Danger
Easily flammable liquids and
materials (e.g. petrol, solvents,
cleaning agents, paints or paper)
can cause deflagration and fire.
Never store or use such materials
in the installation room or in direct
proximity to the heating system.
!Please note
Incorrect ambient conditions can
lead to heating system damage
and can put safe operation at
risk.
■ Ensure ambient temperatures
are above 0 °C and below
35 °C.
■ Prevent air contamination by
halogenated hydrocarbons
(e.g. as contained in paints,
solvents or cleaning fluids) and
excessive dust (e.g. through
grinding/polishing work).
■ Avoid continuously high humid-
ity levels (e.g. through continu-
ous drying of washing).
Extractors
The operation of appliances that extract
air to the outside (cooker hoods, extrac-
tors, air conditioning units, etc.) can cre-
ate negative pressure. If the boiler is
operated at the same time, this can lead
to reverse flow of the flue gas.
Danger
The simultaneous operation of
the boiler and appliances that
extract air to the outside can
result in life threatening poison-
ing due to reverse flow of the flue
gas.
Take suitable steps to ensure an
adequate supply of combustion
air. If necessary, contact your
heating contractor.
Auxiliary components, spare and
wearing parts
!Please note
Components not tested with the
heating system may damage the
system or affect its function.
Only allow qualified contractors
to carry out installation or
replacement work.
Safety instructions
For your safety (cont.)
5461 065 GB

5
Where to find the controls
Summary of controls and indicators..................................................................... 7
■Opening the flap................................................................................................ 7
■ Functions.......................................................................................................... 8
■Symbols on the display..................................................................................... 8
■Display backlighting.......................................................................................... 9
How to use the controls........................................................................................ 9
■Default display.................................................................................................. 9
■Lock out controls............................................................................................... 10
Central heating
Selecting the operating mode............................................................................... 11
■ Heating mode.................................................................................................... 11
■ Frost protection mode....................................................................................... 13
■ "Manual" (operation with constant room temperature)...................................... 13
Setting a permanent room temperature............................................................... 14
■ Setting an individual time program.................................................................... 14
Changing the room temperature for a few days only........................................... 16
■ Setting the holiday program.............................................................................. 16
Changing the room temperature for a few hours only.......................................... 17
■ Making changes with / .................................................................................. 17
■ Setting party mode............................................................................................ 17
■ Setting economy mode..................................................................................... 18
DHW heating
Starting and stopping DHW heating..................................................................... 19
Selecting the time program.................................................................................. 19
■ Setting an individual time program.................................................................... 21
Further adjustments
Time and date...................................................................................................... 23
Summertime/wintertime........................................................................................ 23
Selecting the language......................................................................................... 23
Renaming programs............................................................................................. 24
Temperature adjustment...................................................................................... 24
Control characteristics.......................................................................................... 25
Scanning options
Scanning temperatures and further settings........................................................ 26
Scanning time programs...................................................................................... 26
■ Time program for central heating on the current day for "Prog 1""Prog 1" to
"Prog 3"............................................................................................................. 26
Scanning holiday program (if programmed)......................................................... 26
Index
Index
5461 065 GB

6
What to do if...
Rooms are too cold.............................................................................................. 27
Rooms are too hot................................................................................................ 27
There is no hot water............................................................................................ 27
Î flashes on the display...................................................................................... 28
Changing the batteries......................................................................................... 28
Changing the address code................................................................................. 30
Appendix
Cleaning............................................................................................................... 31
Energy saving tips................................................................................................ 31
Keyword index.................................................................................................... 32
Index
Index (cont.)
5461 065 GB

7
Opening the flap
Where to find the controls
Summary of controls and indicators
5461 065 GB

8
Functions
A
B
C
D
L
ûg
|
|
äOK
å
K
H
G
E
F
ADisplay
BEconomy mode û (page 18)
or
Changing set values
CParty mode g (page 17)
or
Changing set values
DReset
EOpen flap
FType plate
GBattery compartment
HConfirmation
K1 step back in the menu
LCalling up the menu
Symbols on the display
These symbols are not always dis-
played, but appear subject to the oper-
ating condition.
Where to find the controls
Summary of controls and indicators (cont.)
5461 065 GB

9
0 6 12 18 24
We 01.01.09 23:26
21.5°C
Prog 1
ABC
D
E
F
ADay
BDate
CTime
DSelected time program
ECurrent room temperature
FTime program shown as time slot
graphic
rHeat demand for central heating
Heat demand for DHW heating
ÞParty mode enabled
ûEconomy mode enabled
Manual mode enabled
jHoliday program enabled
Frost protection mode enabled
ÎChange batteries
Controls locked out
Display backlighting
The display backlight is activated by
pressing any key and extinguishes 15 s
after the last key activation.
How to use the controls
Default display
21.5°C
When idle, the display always shows the
current room temperature.
■ Pressing any key takes you to the
operating display.
■ Pressing key twice calls up the
menu.
■ takes you one step back in the
menu.
■ The menu will automatically close
30 s after the last key was pressed.
The default display will be shown
3 min later.
Any changes are accepted with OK.
Temperature changes made with keys
/ are accepted automatically after
5 s.
Where to find the controls
Summary of controls and indicators (cont.)
5461 065 GB

10
Lock out controls
You can lock the control keys of the
Vitotrol 100. To do this, press and
simultaneously for 5 s. To unlock the
keys, press and simultaneously
again for 5 s.
Where to find the controls
How to use the controls (cont.)
5461 065 GB