VIETA VH-BS15 User manual
User Manual
Portable Bluetooth Speaker
Please read the user manual first before using the product,
keep well for future referring.
VH-BS15
6. Any additional cost related to installing or uninstalling the product.
7. Products purchased outside Spanish territory or from distributors that are not
authorised.
8. The data contained on our products (photo files, music, digital support, etc.) are not
covered by the guarantee under any circumstance; it is the client’s responsibility to make
back-up files before giving us the product. Likewise, any incorrect configuration or
installation of software or incompatibility issues with hardware belonging to other
equipment, including drivers and controllers.
9. Maintenance, repairs or parts replacement due to use and wear and tear.
10. Rechargeable and/or disposable batteries (life cycle depends on usage frequency).
11. Small faults or variations in the quality of the product that do not affect its value or the
purpose for which it was created.
12. Negligence.
13. Accessories:
• Plugs and cases.
• Connector cables.
• Headband.
• Eartip and sleeve kits.
• Decorative finishes.
14. Any issue detected on receipt of the goods must be notified to customer care
accept any claims regarding broken goods, impacts or missing packages 24 hours after
the goods have been delivered.
www.vieta.es
Terms of guarantee
VIETA EUROPE S.A. guarantees its products for a period of 24 months. The guarantee
period starts on the date of purchase of brand new products that have never been used by
the first end user.
This guarantee covers any possible manufacturing flaws for any Vieta products sold on
Spanish territory by authorised distributors. Vieta products acquired in other countries will
be covered by the guarantee supplied by the local distributor.
This guarantee will only be valid when accompanied by an invoice for the product that
includes the client’s name, the distributor and the date of purchase.
VIETA EUROPE S.A. agrees to repair any product with a problem occurring during normal
use as detailed in the user’s manual and when being used for the purpose for which it was
designed.
The guarantee will not be extended because a component is changed or the product is
replaced.
Incidents that are exempt from guarantee
1. The guarantee period exceeds the stipulated time.
2. When the product has been handled by centres or personnel that are not authorised by
VIETA EUROPE S.A.
3. When the product has been damaged by incorrect handling or use for purposes other
than those it is intended for and that are not contemplated in the user’s manual, or when it
has broken pieces, scratches, cracks, wear and tear, damage produced by particles of
paint, sand, water or food within the unit.
4. This guarantee does not cover expenses or damages caused by transport.
5. Loss, robbery or accidents produced by fire, liquid, chemical substances, excessive
heat, inadequate ventilation, vandalism, electrical storms, incorrect or excessive power
supply, lightening, impact, other external forces, radiation.
34
3
6. Any additional cost related to installing or uninstalling the product.
7. Products purchased outside Spanish territory or from distributors that are not
authorised.
8. The data contained on our products (photo files, music, digital support, etc.) are not
covered by the guarantee under any circumstance; it is the client’s responsibility to make
back-up files before giving us the product. Likewise, any incorrect configuration or
installation of software or incompatibility issues with hardware belonging to other
equipment, including drivers and controllers.
9. Maintenance, repairs or parts replacement due to use and wear and tear.
10. Rechargeable and/or disposable batteries (life cycle depends on usage frequency).
11. Small faults or variations in the quality of the product that do not affect its value or the
purpose for which it was created.
12. Negligence.
13. Accessories:
• Plugs and cases.
• Connector cables.
• Headband.
• Eartip and sleeve kits.
• Decorative finishes.
14. Any issue detected on receipt of the goods must be notified to customer care
accept any claims regarding broken goods, impacts or missing packages 24 hours after
the goods have been delivered.
www.vieta.es
Terms of guarantee
VIETA EUROPE S.A. guarantees its products for a period of 24 months. The guarantee
period starts on the date of purchase of brand new products that have never been used by
the first end user.
This guarantee covers any possible manufacturing flaws for any Vieta products sold on
Spanish territory by authorised distributors. Vieta products acquired in other countries will
be covered by the guarantee supplied by the local distributor.
This guarantee will only be valid when accompanied by an invoice for the product that
includes the client’s name, the distributor and the date of purchase.
VIETA EUROPE S.A. agrees to repair any product with a problem occurring during normal
use as detailed in the user’s manual and when being used for the purpose for which it was
designed.
The guarantee will not be extended because a component is changed or the product is
replaced.
Incidents that are exempt from guarantee
1. The guarantee period exceeds the stipulated time.
2. When the product has been handled by centres or personnel that are not authorised by
VIETA EUROPE S.A.
3. When the product has been damaged by incorrect handling or use for purposes other
than those it is intended for and that are not contemplated in the user’s manual, or when it
has broken pieces, scratches, cracks, wear and tear, damage produced by particles of
paint, sand, water or food within the unit.
4. This guarantee does not cover expenses or damages caused by transport.
5. Loss, robbery or accidents produced by fire, liquid, chemical substances, excessive
heat, inadequate ventilation, vandalism, electrical storms, incorrect or excessive power
supply, lightening, impact, other external forces, radiation.
34
3
Important safety instructions
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical shock
or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water or wet space. Such as bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or basement.
Ventilation
The unit should be situated in the location or position which places won’t interfere its
proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar
surface that may block the ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
Heat
The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
Power Charger
The unit should be connected to a power charger(not included) only of the type described
in the operating instructions or as marked on the appliance.
Cleaning
The unit should be cleaned only as recommended. See the section « Care and
Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care
should be taken so that objects do not fall and liquids are not spilled into any openings or
vents located on the product.
Damage Requiring Service
This unit should be serviced by qualified service personnel when:
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such as a week or longer, the
USB charging cable should be unplugged from the unit to prevent damage.
Servicing
The user should not attempt to service the unit beyond those methods described in the
user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel
Caution
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
Warning
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects
filled with liquids, such as vases, shall not be placed on apparatus.
Care and maintenance
• Do not subject the unit to excessive force, shock, dust or extreme temperature.
• Do not tamper the internal components of the unit.
56
Important safety instructions
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical shock
or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water or wet space. Such as bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or basement.
Ventilation
The unit should be situated in the location or position which places won’t interfere its
proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar
surface that may block the ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
Heat
The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
Power Charger
The unit should be connected to a power charger(not included) only of the type described
in the operating instructions or as marked on the appliance.
Cleaning
The unit should be cleaned only as recommended. See the section « Care and
Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care
should be taken so that objects do not fall and liquids are not spilled into any openings or
vents located on the product.
Damage Requiring Service
This unit should be serviced by qualified service personnel when:
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such as a week or longer, the
USB charging cable should be unplugged from the unit to prevent damage.
Servicing
The user should not attempt to service the unit beyond those methods described in the
user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel
Caution
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
Warning
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects
filled with liquids, such as vases, shall not be placed on apparatus.
Care and maintenance
• Do not subject the unit to excessive force, shock, dust or extreme temperature.
• Do not tamper the internal components of the unit.
56
• Clean the unit with a damp (never wet) cloth except metal contact or speaker grille,
Solvent or detergent should never be used.
• Avoid leaving your unit in hot, humid or dusty places.
• Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
• Always keep your finger dry and clear before touching all the buttons.
• Do not dispose of batteries in fire, batteries may explode or leak.
Battery charging instruction
This unit operates on a built-in Li-ion battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output of
DC 5V 500mA and up.
Note: The mini USB CHARGING JACK located on this unit is only designed for charging the
built-in Li-ion battery.
Charging the battery for first time
1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor (not
included) using the included USB cable.
2.) The battery charging indicator flashes while charging and it stops flashing when the
unit is fully charged.
Unplug the USB cable from the power source once the battery is fully charged.
Recharging the internal battery
After prolonged use, the internal battery will become weak and the operation may become
intermittent. When the internal battery capacity is very low, the battery Indicator will
rapidly flash in red to alert you to recharge the internal battery as soon as possible.
Plug the speaker into a USB port on your computer by using the included USB cable or into
a DC 5V, 500mA and up USB power adaptor (not included). Disconnect the USB cable from
the speaker as soon as it is fully charged.
Notes:
1. Charging time will vary if you are listening to music while charging the internal battery.
We recommend you switch off the speaker power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to completely discharge
it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance and longer battery
life. If you don't use the player that often, be sure to recharge the battery at least once a
month in order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings
are correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults should charge the
batteries.
Follow the manufacturer's instructions for charging the product and do not charge longer
than recommended. Unplug the charger when the battery is charged or not in use.
Note: The speaker is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move the unit further
away from the TV or monitor if an unnatural color shifts or image distortion occurs.
78
• Clean the unit with a damp (never wet) cloth except metal contact or speaker grille,
Solvent or detergent should never be used.
• Avoid leaving your unit in hot, humid or dusty places.
• Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
• Always keep your finger dry and clear before touching all the buttons.
• Do not dispose of batteries in fire, batteries may explode or leak.
Battery charging instruction
This unit operates on a built-in Li-ion battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output of
DC 5V 500mA and up.
Note: The mini USB CHARGING JACK located on this unit is only designed for charging the
built-in Li-ion battery.
Charging the battery for first time
1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor (not
included) using the included USB cable.
2.) The battery charging indicator flashes while charging and it stops flashing when the
unit is fully charged.
Unplug the USB cable from the power source once the battery is fully charged.
Recharging the internal battery
After prolonged use, the internal battery will become weak and the operation may become
intermittent. When the internal battery capacity is very low, the battery Indicator will
rapidly flash in red to alert you to recharge the internal battery as soon as possible.
Plug the speaker into a USB port on your computer by using the included USB cable or into
a DC 5V, 500mA and up USB power adaptor (not included). Disconnect the USB cable from
the speaker as soon as it is fully charged.
Notes:
1. Charging time will vary if you are listening to music while charging the internal battery.
We recommend you switch off the speaker power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to completely discharge
it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance and longer battery
life. If you don't use the player that often, be sure to recharge the battery at least once a
month in order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings
are correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults should charge the
batteries.
Follow the manufacturer's instructions for charging the product and do not charge longer
than recommended. Unplug the charger when the battery is charged or not in use.
Note: The speaker is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move the unit further
away from the TV or monitor if an unnatural color shifts or image distortion occurs.
78
1. Button -
In Bluetooth mode: Press this button
to adjust volume level down during
Bluetooth mode.
2. Button +
In Bluetooth mode: Press this button
to adjust volume level up during.
Bluetooth mode.
Front View
123
Back View Bottom View
467
589
6. Aux-In Jack
7. Mini USB Charging jack
8. Operating mode indicator (Red/Blue/Purple)
• Blue color = Bluetooth mode
• Red = Aux-in mode
9. Power On/Off selector
Location of controls
3. Button
• While unit is in Bluetooth mode, press once to play or pause the current track.
• In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button
once to answer the phone, press this button again or press and hold this button to end the
call or ignore the incoming call.
4. Built-in Microphone
5. Battery charging Indicator (Red color)
• Rapid flashing = low battery
While charging:
• Flashing = charging
• Steady Red = full charged
910
1. Button -
In Bluetooth mode: Press this button
to adjust volume level down during
Bluetooth mode.
2. Button +
In Bluetooth mode: Press this button
to adjust volume level up during.
Bluetooth mode.
Front View
123
Back View Bottom View
467
589
6. Aux-In Jack
7. Mini USB Charging jack
8. Operating mode indicator (Red/Blue/Purple)
• Blue color = Bluetooth mode
• Red = Aux-in mode
9. Power On/Off selector
Location of controls
3. Button
• While unit is in Bluetooth mode, press once to play or pause the current track.
• In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button
once to answer the phone, press this button again or press and hold this button to end the
call or ignore the incoming call.
4. Built-in Microphone
5. Battery charging Indicator (Red color)
• Rapid flashing = low battery
While charging:
• Flashing = charging
• Steady Red = full charged
910
Turn the speaker power ON/OFF
1. Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the
orange line mark on the selector can not been seen),a voice prompt “Power on” and a
beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash
in blue.
2. To turn the unit off, slide the Power ON/OFF switch to OFF position (where the orange
round mark on the selector can been seen).
Operating the speaker in Bluetooth mode
Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for
example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which
work on the same frequency band.
• This speaker offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
• If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
• Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
2. Turn on the speaker, the operating indicator flashes in Blue to show that the pairing
mode is activated.
Pair the Speaker manually
1. Activate Bluetooth on the compatible device, and set it to search for compatible devices.
2. Select the speaker name: “Vieta VH-BS15” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
3. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “Pairing completed” and a
beep sound is heard, meanwhile, the Blue color indicator stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow
the pairing instructions below to link the speaker with your Bluetooth device.
11 12
Turn the speaker power ON/OFF
1. Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the
orange line mark on the selector can not been seen),a voice prompt “Power on” and a
beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash
in blue.
2. To turn the unit off, slide the Power ON/OFF switch to OFF position (where the orange
round mark on the selector can been seen).
Operating the speaker in Bluetooth mode
Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for
example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which
work on the same frequency band.
• This speaker offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
• If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
• Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
2. Turn on the speaker, the operating indicator flashes in Blue to show that the pairing
mode is activated.
Pair the Speaker manually
1. Activate Bluetooth on the compatible device, and set it to search for compatible devices.
2. Select the speaker name: “Vieta VH-BS15” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
3. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “Pairing completed” and a
beep sound is heard, meanwhile, the Blue color indicator stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow
the pairing instructions below to link the speaker with your Bluetooth device.
11 12
1. After turning on the speaker, the speaker will search for the last paired device. The
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a
beep sound is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing (linking), you can begin playing music from your Bluetooth
device wirelessly to the speaker.
3. Press the + / - button on the speaker to adjust to the desired volume level.
Using The Speaker as a Handfree Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap button on the speaker to
switch the incoming call from cell phone to the speaker. A short beep sound will be heard
confirming the call was answered. Complete your call using the built-in microphone and
speaker.
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the button again, a short beep sound will be heard and the
call will end. If you were playing music from your cell phone to the speaker before
answering the call, the music will automatically resume playing when you hang up.
5. To ignore an incoming call, simply press and hold the button on the speaker for
about 2 seconds, a beep sound will be heard and the call will be ignored.
Operating the speaker in aux-in mode
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect
this unit via bluetooth directly, you can still play it on the speaker via an audio connecting
cable.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on
your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Slide the Power ON/OFF switch to ON position to turn on the unit, the operating mode
indicator will light up in Red.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1) If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this speaker. If you're connected to the Headphone Jack of
your external device, then you may need to adjust both the volume control of your external
device and the volume control of this unit to find the most desirable volume setting.
2) Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish
listening.
Don't forget to switch off the power of your external device as well.
13 14
1. After turning on the speaker, the speaker will search for the last paired device. The
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a
beep sound is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing (linking), you can begin playing music from your Bluetooth
device wirelessly to the speaker.
3. Press the + / - button on the speaker to adjust to the desired volume level.
Using The Speaker as a Handfree Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap button on the speaker to
switch the incoming call from cell phone to the speaker. A short beep sound will be heard
confirming the call was answered. Complete your call using the built-in microphone and
speaker.
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the button again, a short beep sound will be heard and the
call will end. If you were playing music from your cell phone to the speaker before
answering the call, the music will automatically resume playing when you hang up.
5. To ignore an incoming call, simply press and hold the button on the speaker for
about 2 seconds, a beep sound will be heard and the call will be ignored.
Operating the speaker in aux-in mode
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect
this unit via bluetooth directly, you can still play it on the speaker via an audio connecting
cable.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on
your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Slide the Power ON/OFF switch to ON position to turn on the unit, the operating mode
indicator will light up in Red.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1) If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this speaker. If you're connected to the Headphone Jack of
your external device, then you may need to adjust both the volume control of your external
device and the volume control of this unit to find the most desirable volume setting.
2) Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish
listening.
Don't forget to switch off the power of your external device as well.
13 14
No audio
signal via the
Bluetooth
connection
Speaker is not paired to
the audio source
Check whether a connection
exists. If necessary, pair the
speaker again to the audio
source
Volume too low Increase the volume on the
speaker
Increase the volume on the
audio source
Speaker
cannot be
connected
Pairing does not work Check whether the audio source
supports the A2DP protocol
Audio source isswitched off Switch on the audio source
Bluetooth is switched off at
the audio source
Switch on the Bluetooth
function in the audio source
Fault Cause Solution
No
Charging
The USB power adaptor (not
included) is not plugged into a
wall outlet or the USB cable
(included)is not plugged into
the mini USB jack on the
bottom of the VH-BS15
Plug the USB power adaptor
(not included) into a wall
outlet and plug the USB cable
(included) into the mini USB
jack on the VH-BS15
Wall outlet is not
functioning
Plug another device into the
same outlet to confirm the
outlet is working
Computer USB port is not
function
Make sure your computer
power is turned on and try
another USB port
Fault Cause Solution
NO
Sound
The VH-BS15 battery is
dead
Recharge the VH-BS15
battery
The VH-BS15 is not linked
with the cell phone
Go through “Operating The
Speaker” process to link the
speaker
Volume set too low Increase the volume of your
device
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following chart.
Bluetooth version is not
supported
Use a different playback
unit
Poor sound
quality from
a Bluetooth®
device
Bluetooth device is almost
out of range of the
VH-BS15
Move your Bluetooth device
closer to the VH-BS15
Specifications
Battery capacity (included): 660 mAH
Charging Voltage: DC 5V, 500Ma and up
Max Play Time: 3 Hours
Working Temperature: -5º~+ 40º
Working Humidity:20%~80%
15 16
No audio
signal via the
Bluetooth
connection
Speaker is not paired to
the audio source
Check whether a connection
exists. If necessary, pair the
speaker again to the audio
source
Volume too low Increase the volume on the
speaker
Increase the volume on the
audio source
Speaker
cannot be
connected
Pairing does not work Check whether the audio source
supports the A2DP protocol
Audio source isswitched off Switch on the audio source
Bluetooth is switched off at
the audio source
Switch on the Bluetooth
function in the audio source
Fault Cause Solution
No
Charging
The USB power adaptor (not
included) is not plugged into a
wall outlet or the USB cable
(included)is not plugged into
the mini USB jack on the
bottom of the VH-BS15
Plug the USB power adaptor
(not included) into a wall
outlet and plug the USB cable
(included) into the mini USB
jack on the VH-BS15
Wall outlet is not
functioning
Plug another device into the
same outlet to confirm the
outlet is working
Computer USB port is not
function
Make sure your computer
power is turned on and try
another USB port
Fault Cause Solution
NO
Sound
The VH-BS15 battery is
dead
Recharge the VH-BS15
battery
The VH-BS15 is not linked
with the cell phone
Go through “Operating The
Speaker” process to link the
speaker
Volume set too low Increase the volume of your
device
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following chart.
Bluetooth version is not
supported
Use a different playback
unit
Poor sound
quality from
a Bluetooth®
device
Bluetooth device is almost
out of range of the
VH-BS15
Move your Bluetooth device
closer to the VH-BS15
Specifications
Battery capacity (included): 660 mAH
Charging Voltage: DC 5V, 500Ma and up
Max Play Time: 3 Hours
Working Temperature: -5º~+ 40º
Working Humidity:20%~80%
15 16
Le rogamos que lea el manual de usuario antes de utilizar el producto y que lo guarde
para futuras consultas. La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
VH-BS15
Manual de usuario
Altavoz portátil Bluetooth
Table of contents
Other VIETA Speakers manuals
VIETA
VIETA VH-BS330BK User manual
VIETA
VIETA VH-IS1000 User manual
VIETA
VIETA VH-IS500BK User manual
VIETA
VIETA La-8 plus A User manual
VIETA
VIETA VM-BS160BK User manual
VIETA
VIETA VM-BS29 User manual
VIETA
VIETA VH-IS150SL User manual
VIETA
VIETA La-115S plus A User manual
VIETA
VIETA VH-BS075SL User manual
VIETA
VIETA VMHW800BK User manual
