ViewSonic PJ-WPD-700 User manual

PJ-WPD-700
User Guide
Model No. VS19836
P/N: PJ-WPD-700
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.

2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

3
Contents
Introduction ................................................................ 4
Package Contents ...................................................................................................4
Product Overview...................................................................................................5
Receiver................................................................................................................... 5
Transmitter.............................................................................................................. 5
Making Connections.................................................... 6
Connecting the Receiver.........................................................................................6
Connecting the Transmitter....................................................................................6
Appendix..................................................................... 7
Specifications..........................................................................................................7
LED Indicator ..........................................................................................................8
Transmitter.............................................................................................................. 8
Product Dimensions ...............................................................................................9
Transmitter.............................................................................................................. 9
Receiver................................................................................................................... 9
Regulatory and Service Information .......................... 10
Compliance Information.......................................................................................10
FCC Compliance Statement................................................................................... 10
FCC Radiation Exposure Statement....................................................................... 11
SAR statement ...................................................................................................... 11
IC Warning Statement ........................................................................................... 12
Country Code Statement....................................................................................... 12
IC Radiation Exposure Statement.......................................................................... 13
CE Conformity for European Countries ................................................................. 14
Declaration of RoHS2 Compliance......................................................................... 15
Indian Restriction of Hazardous Substances ......................................................... 16
Product Disposal at End of Product Life ................................................................ 16
Copyright Information ..........................................................................................17
Customer Service .................................................................................................. 18

4
Introducon
Package Contents
Receiver Transmier So Carry Case
NOTE: If anything is missing or damaged, please contact your local reseller for
more informaon.

5
Product Overview
Receiver
2
1
3
Number Item Descripon
1 HDMI1Output Version 1.4; connect to a projecon device.
2 USB A2Input For power input only (5V/0.5A).
3 Reset For pairing and reseng to default sengs.
Transmier
3
2
1
4
Number Item Descripon
1 USB C3Input Display input; connect to the casng device (e.g., laptop,
mobile phone, tablet).
2Pair Buon
• Press to turn casng ON/OFF as the display signal is
transming.
• Press and hold for ve (5) seconds to enter pairing
mode (if needed)
3Reset Buon Press and hold for ve (5) seconds to reset the device to
factory default sengs.
4 LED Indicator Indicates the power and connecon status.
¹ Compable with HDMI 1.4
² Compable with USB A
³ Compable with USB C. Ensure your device supports video output and power delivery via USB C port (DisplayPort
Alternave Mode on USB C)

6
Making Connecons
Connecng the Receiver
TX
RX
HDMI
USB C
USB A
(5V/0.5A)
HDMI* : Compatible with HDMI 1.4
USB A*: Compatible with USB A
USB C*: Compatible with USB C
1. Connect the Receiver’s HDMI Output to an HDMI port of the projector.
NOTE: Ensure the projector is also turned ON.
2. Plug the Receiver’s USB A Input into the USB A port of the projector that can
provide 5V/0.5A power.
Connecng the Transmier
TX
RX
HDMI
USB C
USB A
(5V/0.5A)
HDMI* : Compatible with HDMI 1.4
USB A*: Compatible with USB A
USB C*: Compatible with USB C
1. Connect the Transmier’s USB C Input to a USB C port of the casng device (e.g.
laptop, mobile phone, tablet).
2. Once connected, the Transmier’s LED Indicator will ash for a few seconds then
stop. At this me, the casng device’s screen will cast automacally.
3. Pressing the Pair Buon will toggle casng ON/OFF while the casng device is
transming.
NOTE:
• Ensure your device supports video output and power delivery via USB C
port (DisplayPort Alternave Mode on USB C).
• Casng is supported for all laptops, including those running Windows and
macOS, as well as Android and Apple devices with DP Alt output.
• Duplicate and Extend mode for Windows/macOS systems are supported.
• To reset to default sengs, press the Reset Buon for ve (5) seconds.
• Genuine HDCP (High-bandwidth Digital Content Protecon) for DRM
(Digital Rights Management) streaming is supported.

7
Appendix
Specicaons
Category Specicaons
Funcon Transmier Receiver
Wi-Fi 5 GHz 1T1R 5 GHz 1T1R
HDCP Support HDCP 1.4 HDCP 1.4
Video support up to 1080p @ 60 Hz up to 1080p @ 60 Hz
Audio support 2 channels, PCM 2 channels, PCM
Interface Specicaons
HDMI N/A 1
USB C11N/A
USB A N/A 1 (only for power input)
Physical Buons Specicaons
Pair Buon 1 1 (Pin hole)
Reset Buon 1N/A
Miscellaneous Specicaons
Power Input 5V/1A 5V/0.5A
Power Consumpon 3W 1.5W
Physical Dimension
(W x H x D)
170 x 40 x 16 mm
(6.69” x 1.57” x 0.63”)
677 x 17 x 6 mm
(26.65” x 0.67” x 0.24”)
Weight 37.5 g
(0.08 lbs)
19 g
(0.04 lbs)
Operang Temperature 0° C to 35° C.
(32° F to 95° F)
Operang Humidity 10% to 90% (non-condensing)
¹ Ensure your device supports video output and power delivery via USB C port (DisplayPort Alternave Mode on USB C)

8
LED Indicator
Transmier
Light Descripon
Solid White The Transmier is connected to the Receiver successfully and
is operang normally.
Flashing (Slowly) The Transmier is ready to pair with the Receiver when the
receiver is powered up.
Flashing (Quickly) The Transmier is connecng with the Receiver.
O The Transmier is not working properly; or there is no power
input.

9
Product Dimensions
Transmier
/
170 mm
40 mm
16 mm
677 mm
17 mm
6 mm
Receiver
/
170 mm
40 mm
16 mm
677 mm
17 mm
6 mm

10
Regulatory and Service Informaon
Compliance Informaon
This secon addresses all connected requirements and statements regarding
regulaons. Conrmed corresponding applicaons shall refer to nameplate labels
and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operaon is subject to the following
two condions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operaon. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance
with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cauoned that changes or modicaons not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
CAN ICES-003(B) / NMB-003(B)

11
FCC Radiaon Exposure Statement
This equipment complies with FCC radiaon exposure limits set forth for an
uncontrolled environment. End users must follow the specic operang instrucons
for sasfying RF exposure compliance.
This transmier must not be co-located or operang in conjuncon with any other
antenna or transmier. This equipment should be installed and operated with a
minimum distance of 20 cenmeters between the radiator and your body.
The users manual or instrucon manual for an intenonal or unintenonal radiator
shall cauon the user that changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
SAR statement
This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communicaons Commission of
the U.S. Government.
The SAR limit set by the FCC is 1.6W/Kg. For body-worn operaon, this device has
been tested and meets the FCC RF exposure guidelines for use with an accessory
that contains no metal and posions the device a minimum of 0mm from the body.
RF exposure compliance with any body-worn accessory that contains metal was
not tested and cered. And use of such body-worn accessory should be avoided.
Accessory available in market and must be used to keep use distance 0mm from
EUT to body-worn operaon.
VS19859 FCC ID: GSSVS19859
VS19836 FCC ID: GSSVS19836

12
IC Warning Statement
This device complies with Industry Canada license- exempt RSS standard(s).
Operaon is subject to the following two condions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitaon est autorisée aux deux condions
suivantes : ( 1 ) l’appareil ne doit pas produire de brouillage, et ( 2) l’ulisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, méme si le brouillage
est suscepble d’en compromere le fonconnement.
Country Code Statement
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selecon of other channels is not possible.
Pour les produits disponibles aux États-Unis/Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélecon d’autres canaux n’est pas possible.

13
IC Radiaon Exposure Statement
This equipment complied with IC RSS-102 radiaon exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body. The device for
the band 5150-5825 MHz is only for indoor usage to reduce potenal for harmful
interference to co-channel mobile satellite systems.
Cet équipement est conforme aux limites d’exposion aux rayonnements IC
établies pour un environnement non contrôlê. Cet équipement doit être installé
et ulize avec un minimum de 20cm de distance entre la source de rayonnement
et votre corps. les disposifs fonconnant dans la bande 5150-5825 MHz sont
réservés uniquement pour une ulisaon à l’intérieur an de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles ulisant les mêmes
canaux.
Radiaon Exposure: This equipment complies with Canada radiaon Exposure
limits set forth for an uncontrolled environment to maintain compliance with IC’s
RF Exposure guidelines. This device and its antenna(s) must not be co-located or
operaon in conjuncon with any other antenna or transmier.
Exposion au rayonnement: cet équipement est conforme au rayonnement
Canada Les limites d’exposion xées pour un environnement non contrôlé an
de maintenir la conformité avec les lignes directrices d’exposion aux RF d’IC.
Ce disposif et ses antennes ne doivent pas être co-localisés ni fonconner en
conjoncon avec une autre antenne ou un autre émeeur.
Operaon in the band 5150-5250 MHz is only for indoor use to reduce the potenal
for harmful interference to co-channel mobile satellite systems.
La bande 5150-5250 MHz est réservés uniquement pour une ulisaon à l’intérieur
an de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles ulisant les mêmes canaux.
VS19859 IC ID: 4280A-VS19859
VS19836 IC ID: 4280A-VS19836

14
CE Conformity for European Countries
The device complies with the EMC Direcve 2014/30/EU and Low Voltage
Direcve 2014/35/EU. Radio Equipment Direcve 2014/53/EU.
The following informaon is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical
and Electronic Equipment Directive 2012/19/EU (WEEE). The mark
indicates the requirement NOT to dispose of the equipment as unsorted
municipal waste, but use the return and collection systems according to
local law.

15
Declaraon of RoHS2 Compliance
This product has been designed and manufactured in compliance with Direcve
2011/65/EU of the European Parliament and the Council on restricon of the use
of certain hazardous substances in electrical and electronic equipment (RoHS2
Direcve) and is deemed to comply with the maximum concentraon values issued
by the European Technical Adaptaon Commiee (TAC) as shown below:
Substance Proposed Maximum
Concentraon
Actual
Concentraon
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6⁺) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Bis(2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
Butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex
III of the RoHS2 Direcves as noted below:
• Copper alloy containing up to 4% lead by weight.
• Lead in high melng temperature type solders (i.e. lead-based alloys containing
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
• Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC
or higher.

Indian Restricon of Hazardous Substances
Restricon on Hazardous Substances statement (India). This product complies
with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentraons exceeding 0.1 weight % and 0.01 weight % for cadmium, except for
the exempons set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is commied to working and living
green. Thank you for being part of Smarter, Greener Compung. Please visit the
ViewSonic® website to learn more.
USA & Canada:
hps://www.viewsonic.com/us/go-green-with-viewsonic
Europe:
hps://www.viewsonic.com/eu/go-green-with-viewsonic
Taiwan:
hps://recycle.epa.gov.tw/

17
Copyright Informaon
Copyright© ViewSonic® Corporaon, 2023. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microso, Windows, and the Windows logo are registered trademarks of Microso
Corporaon in the United States and other countries.
ViewSonic® and the three birds logo are registered trademarks of ViewSonic®
Corporaon.
VESA is a registered trademark of the Video Electronics Standards Associaon.
DPMS, DisplayPort, and DDC are trademarks of VESA.
Disclaimer: ViewSonic® Corporaon shall not be liable for technical or editorial
errors or omissions contained herein; nor for incidental or consequenal damages
resulng from furnishing this material, or the performance or use of this product.
In the interest of connuing product improvement, ViewSonic® Corporaon
reserves the right to change product specicaons without noce. Informaon in
this document may change without noce.
No part of this document may be copied, reproduced, or transmied by any means,
for any purpose without prior wrien permission from ViewSonic® Corporaon.
PJ-WDP-700_UG_ENG_1a_20231025

Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product’s serial number.
Country/ Region Website Country/ Region Website
Asia Pacic & Africa
Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/
中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/
Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/
Indonesia www.viewsonic.com/id/ Israel www.viewsonic.com/il/
日本 (Japan) www.viewsonic.com/jp/ Korea www.viewsonic.com/kr/
Malaysia www.viewsonic.com/my/ Middle East www.viewsonic.com/me/
Myanmar www.viewsonic.com/mm/ Nepal www.viewsonic.com/np/
New Zealand www.viewsonic.com/nz/ Pakistan www.viewsonic.com/pk/
Philippines www.viewsonic.com/ph/ Singapore www.viewsonic.com/sg/
臺灣 (Taiwan) www.viewsonic.com/tw/ ประเทศไทย www.viewsonic.com/th/
Việt Nam www.viewsonic.com/vn/ South Africa & Maurius www.viewsonic.com/za/
Americas
United States www.viewsonic.com/us Canada www.viewsonic.com/us
Lan America www.viewsonic.com/la
Europe
Europe www.viewsonic.com/eu/ France www.viewsonic.com/fr/
Deutschland www.viewsonic.com/de/ Қазақстан www.viewsonic.com/kz/
Россия www.viewsonic.com/ru/ España www.viewsonic.com/es/
Türkiye www.viewsonic.com/tr/ Україна www.viewsonic.com/ua/
United Kingdom www.viewsonic.com/uk/

19