Viking TMS-RDMA User manual

• One inch LED display indicates next line to
answer
• Generates an audible, distinctive ring for
attendants
• Adjustable ringing volume
• Wall mount bracket included
• 6-wire installation
• Up to three remote display modules can be
connected to one Viking TMS-6X or TMS-12A
Call Sequencer
• Can be installed up to 1000 feet from the call
sequencer for a variety of applications
(optional PS-2 power supply allows 2000 feet)
• Bi-directional mounting
The TMS-RDMA is designed to provide a remote
indication of the next line to answer for TMS-6X and
TMS-12A Call Sequencer users.
The TMS-RDMA generates audible ringing and
displays the line number of the oldest call waiting.
Attendants or agents can then answer calls in a
professional, timely manner.
Up to three remote displays can be used with one
Viking TMS-6X or TMS-12A Call Sequencer. The
TMS-RDMA has a one inch LED display and can be
wall mounted or placed on a desktop.
Call Se
q
uencer Remote Displa
y
Module
VIKING©
Technical Practice
Telecommunication Peripheral Products TMS-RDMA
Remote Display
Module
December 18, 1998
Features Applications
Sales...(715) 386 - 8861
Made in the U.S.A.
Power: Call sequencer powered (20V DC/18mA minimum)
Dimensions: 75mm x 130mm x 40mm (2.9” x 5” x 1.5”)
Shipping Weight: .45 kg (1 lb)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
Connections: RJ25 jack
Maximum Cable Run: 305 m (1000 ft) (610 m (2000 ft) with
optional PS-2 power supply)
Specifications
• For use with all Viking Call Sequencers,
including:
1. TMS-6X
2. TMS-12A
http://www.VikingElectronics.com
[email protected]

Printed in the U.S.A. ZF290800 Rev CFax Back Doc # 075
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions of
this document or new editions of it may be issued to incorporate such changes.
Product Support Line...[phone] Fax Back Line...[phone]
Installation/Programming
Operation
1. Determine the best wiring configuration for your application (section Cbelow).
2. Connect the 6-wire plug (RJ25) from the TMS-RDMA to the RJ25 connector marked “SQRG-12” on the back
panel of the TMS-6X.
Note: The TMS-RDMA is NOT polarity sensitive to the 6-wire connection to the TMS-6X.
A. Installing with a TMS-6X
B. Installing with a TMS-12A
1. Determine the best wiring configuration for your application (section C, below).
2. Connect the 6-wire plug (RJ25) from the TMS-RDMA to one of the following:
a. The modular RJ25 connector marked “SQRG-12/TMS-RDMA.”
b. The RJ21X punch down connector.
3. Place protocol switch 11 in the down position.
Note: The TMS-RDMA is NOT polarity sensitive to the 6-wire connection to the TMS-12A.
C. Recommended Maximum Run Length
Number of TMS-RDMA’s
1
2
3
Maximum Run Length
1000 feet (305 m)
400 feet (122 m)
300 feet (91 m)
Note: 2,000 foot runs are possible with optional power supply
PS-2 (Fax Back Document 510).
Important: Use 24 gauge 6-wire cord.
E. Wiring Configurations
1. Three Separate Runs
of 1000 feet 2. Three Units on the
Same Run
3. Using Optional Power Supplies
On normal incoming calls the TMS-RDMA will display the line to be answered and provide standard cadence tone burst. This ring
represents the incoming call before the call has been answered by the TMS-6X or the TMS-12A. In instances where one or more
lines have been answered by the TMS-6X or the TMS-12A, a double tone burst will sound. The digital display will then indicate the
next line to answer.
300 foot maximum
2000 foot maximum
1000 foot maximum
D. DIP Switch Settings
DIP Switch
1
2
3
On
TMS-12A
Inverted Display
Not Used
Off
TMS-6X
Normal Display
Not Used
VIKING ELECTRONICS, INC.
HUDSON, WI 54016
L4
,
L5
,
L6
MUSIC
RING VOLUME
SQRG-12 L1
,
L2
,
L3
USE ONLY
LISTED
CLASS 2
POWER
SOURCE
12-14 VAC
TMS-6X or TMS-12A
VIKING ELECTRONICS, INC.
HUDSON, WI 54016
L4
,
L5
,
L6
MUSIC
RING VOLUME
SQRG-12 L1
,
L2
,
L3
USE ONLY
LISTED
CLASS 2
POWER
SOURCE
12-14 VAC
TMS-6X or TMS-12A
VIKING ELECTRONICS, INC.
HUDSON, WI 54016
L4, L5, L6
MUSIC
RING VOLUME
SQRG-12 L1, L2, L3
USE ONLY
LISTED
CLASS 2
POWER
SOURCE
12-14 VAC
TMS-6X or TMS-12A
On Off
Rear View of
the TMS-RDMA
TMS-RDMA
Inverted Display
(DIP Switch 2 On)
PS-2
Power
Supply
PS-2
Power
Supply
PS-2
Power
Supply