Viking DGCU165 User manual

2
DESCRIPTION DGCU105 (30” W.) DGCU165 (36” W.) DGCU155 (45” w.)
Cutout Width - Minimum 28 3/4” (73.0 cm) 34 1/2” (87.6 cm) 42 7/8” (108.9 cm)
Maximum 29 7/8” (75.9 cm) 35 7/8” (91.1 cm) 44 1/8” (112.1 cm)
Cutout Height - Minimum 2 3/4” (7.0 cm)
Cutout Depth - Minimum 19 11/16” (50.0 cm)
Maximum 20 1/2” (52.1cm)
Overall Width 30 3/4” (78.1 cm) 36 3/4” (93.3 cm) 45” (114.3 cm)
Overall Height from Bottom
(including connector) 4 1/4” (10.8 cm)
Overall Depth from Rear 21” (53.3 cm)
Gas Requirements Not field convertible - Must be ordered from factory either natural or LP/Propane. Uses
standard residential 1/2” (1.3 cm) I.D. gas service line.
Electrical Requirements 120 VAC/60 Hz; 4 ft. (121.9 cm), 3-wire cord with grounded 3-prong plug attached to product.
Maximum Amp Usage 2.0 amps
Surface Burner Rating
Left Front- 14,000 Nat./13,500 LP (BTU) 12,000 Nat./11,500 LP (BTU) 12,000 Nat./11,500 LP (BTU)
(4.1 Nat./4.0 LP [kw]) (3.5 Nat./2.8 LP [kw]) (3.5 Nat./2.8 LP [kw])
Left Rear- 12,000 Nat./11,500 LP (BTU) 10,000 Nat./LP (BTU) 8,000 Nat./LP (BTU)
(3.5 Nat./2.8 LP [kw]) (2.9 Nat./LP [kw]) (2.1 Nat./LP [kw])
Left Center N/A 14,000 Nat./13,500 LP (BTU) 10,000 Nat./LP (BTU)
(4.1 Nat./4.0 LP [kw]) (2.9 Nat./LP [kw])
Right Center N/A N/A 14,000 Nat./13,500 LP (BTU)
(4.1 Nat./4.0 LP [kw])
Right Rear- 8,000 Nat./LP (BTU) 8,000 Nat./LP (BTU) 6,000 Nat./LP (BTU)
(2.1 Nat./LP [kw]) (2.1 Nat./LP [kw]) (1.8 Nat./LP [kw])
Right Front- 6,000 Nat./LP (BTU) 6,000 Nat./LP (BTU) 8,000 Nat./LP (BTU)
(1.8 Nat./LP [kw]) (1.8 Nat./LP [kw]) (2.1 Nat./LP [kw])
Approximate Shipping Weight 67 lb. (30.2 kg.) 80 lb. (36.0 kg) 93 lb. (41.9 kg)
DESCRIPTION VGSU102 (30” W.) VGSU162 (36” W.)
Cutout Width - Minimum 26 7/8” (68.3 cm) 34 3/8” (87.3 cm)
Maximum 29 7/8” (75.9 cm) 35 7/8” (91.1 cm)
Cutout Height - Minimum 2 1/2” (6.4 cm)
Cutout Depth - Minimum 18 5/8” (47.3 cm)
Maximum 20 1/8” (51.1cm)
Overall Width 30 3/4” (78.1 cm) 36 3/4” (93.3 cm)
Overall Height from Bottom 5” (12.7 cm)
Overall Depth from Rear 21” (53.3 cm)
Gas Requirements To field convert from natural or LP/Propane, the orifice spuds and regulator must be physically
changed. Order conversion kit NK2VGSU to convert to natural and LPK3VGSU to convert to LP.
Uses standard residential 1/2” (1.3 cm) I.D. gas service line.
Electrical Requirements 120 VAC/60 Hz; 4 ft. (121.9 cm), 3-wire cord with grounded 3-prong plug attached to product.
Maximum Amp Usage 2.0 amps
Surface Burner Rating
Left Front- 16,000 Nat./15,500 LP (BTU) 16,000 Nat./15,500 LP (BTU)
(4.8 Nat./4.65 LP [kw]) (4.8 Nat./4.65 LP [kw])
Left Rear- 12,000 Nat./11,500 LP (BTU) 12,000 Nat./11,500 LP (BTU)
(3.6 Nat./3.45 LP [kw]) (3.6 Nat./3.45 LP [kw])
Center Front/Rear N/A 12,000 Nat./11,500 LP (BTU)
(3.6 Nat./3.45 LP [kw])
Right Rear- 8,000 Nat./7,500 LP (BTU) 8,000 Nat./7,500 LP (BTU)
(2.4 Nat./2.25 LP [kw]) (2.4 Nat./2.25 LP [kw])
Right Front- 6,000 Nat./5,500 LP (BTU) 6,000 Nat./5,500 LP (BTU)
(1.8 Nat./1.65 LP [kw]) (1.8 Nat./1.65 LP [kw])
Approximate Shipping Weight 67 lb. (30.2 kg.) 80 lb. (36.0 kg)
BASIC SPECIFICATIONS

3
GENERAL INFORMATION
1. WARNING::The use of cabinets for storage above the appliance may result in a potential burn hazard.
Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be
provided the risk can be reduced by installing a rangehood that projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
2. WARNING::This appliance shall not be used for space heating. This information is based on safety
considerations.
3. All openings in the wall behind the appliance and in the floor under the appliance shall be sealed.
4. Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.
5. Do not obstruct the flow of combustion and ventilation air.
6. Disconnect the electrical supply to the appliance before servicing.
7. When removing cooktop for cleaning and/or service;
A. Shut off gas at main supply
B. Disconnect AC power supply
C. Disconnect gas line to the inlet pipe.
D. Lift appliance out of cabinet cutout.
8. Electrical Requirement
Normal grounded household current, 120 volts, 60 Hz, 15 amps, single phase. Electrical installation should
comply with national and local codes.
9. Air Supply and Ventilation
Means must be provided for any heavy-duty cooking appliance to exhaust combustion waste product to the
outside of the building. It is recommended that the cooktop be set under a powered, vented exhaust hood, or
non-vented recirculating hood. Nothing should obstruct the flow of combustion and ventilation air.
10. Gas Manifold Pressure
Natural gas - 5.0” W.C.P.
LP/Propane - 10.0” W.C.P.
11. Flexible Connections
If the unit is to be installed with flexible couplings and/or quick disconnect fittings, the installer must use a
flexible connector of at least 1/2” I.D. (1.3 cm) NPT with suitable strain reliefs and comply with ANSI Z21.41
and Z21.69 standards.
DESCRIPTION DGSU100 (30” W.) DGSU160 (36” W.)
Cutout Width - Minimum 29 1/8” (74.0 cm) 34 7/8” (88.6 cm)
Maximum 29 7/8” (75.9 cm) 35 7/8” (91.1 cm)
Cutout Height - Minimum 3 1/8” (7.9 cm)
Cutout Depth - Minimum 19 3/4” (50.2 cm)
Maximum 20 1/8” (51.1cm)
Overall Width 30 3/4” (78.1 cm) 36 3/4” (93.3 cm)
Overall Height from Bottom 4 3/8” (10.5 cm)
Overall Depth from Rear 21” (53.3 cm)
Gas Requirements To field convert from natural or LP/Propane, the orifice spuds and regulator must be physically
changed. Order conversion kit DLPK to convert to LP. Uses standard residential 1/2” (1.3
cm) I.D. gas service line.
Electrical Requirements 120 VAC/60 Hz; 4 ft. (121.9 cm), 3-wire cord with grounded 3-prong plug attached to product.
Maximum Amp Usage 2.0 amps
Surface Burner Rating
Left Front- 14,000 Nat./13,500 LP (BTU) 12,000 Nat./11,500 LP (BTU)
(4.1 Nat./4.0 LP [kw]) (3.5 Nat./2.8 LP [kw])
Left Rear- 12,000 Nat./11,500 LP (BTU) 10,000 Nat./LP (BTU)
(3.5 Nat./2.8 LP [kw]) (2.9 Nat./LP [kw])
Center Front/Rear N/A 14,000 Nat./13,500 LP (BTU)
(4.1 Nat./4.0 LP [kw])
Right Rear- 8,000 Nat./LP (BTU) 8,000 Nat./LP (BTU)
(2.1 Nat./LP [kw]) (2.1 Nat./LP [kw])
Right Front- 6,000 Nat./LP (BTU) 6,000 Nat./LP (BTU)
(1.8 Nat./LP [kw]) (1.8 Nat./LP [kw])
Approximate Shipping Weight 49 lb. (22.0 kg.) 74 lb. (33.3 kg)

PROXIMITY TO SIDE CABINETS
1. The cooktop may be installed directly to existing base cabinets.
2. The cooktop CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical
surfaces above 36” (91.4 cm) high. There must be a minimum of 8” (20.3 cm) side clearance from the cooktop to
such combustible surfaces above the 36” (91.4 cm) counter height.
3. Within the 8” (20.3 cm) side clearance to combustible vertical surfaces above 36” (91.4 cm), the maximum wall
cabinet depth must be 13” (33.0 cm) and wall cabinets within this 8” (20.3 cm) side clearance must be 18” (45.7 cm)
above the 36” (91.4 cm) high countertop.
4. Wall cabinet above the cooktop must be a minimum of 36” (91.4 cm) above the countertop for a full width of the
cooktop. This minimum height requirement does not apply if a rangehood is installed over the cooking surface.
5. A 120 volt wall receptacle should be located approximately 6” (15.2 cm) below the countertop cutout and 12”
(30.5 cm) from the right side of the cutout.
MINIMUM CLEARANCES FROM ADJACENT COMBUSTIBLE
CONSTRUCTION
•Above countertop (above 36” [91.4 cm])
•Sides 8” (20.3 cm)
•Rear - See chart dimension “A”
•Within 8” (20.3 cm) side clearance. Wall cabinets no deeper
than 13” (33.0 cm)
•Must be minimum 18” (45.7 cm) above countertop
•Wall cabinets directly above the product must be minimum
36” (91.4 cm) above the countertop.
4
13” max.
(33.0 cm)
36” min.
(91.4 cm)
18” min.
(45.7 cm)
8” min.
(20.3 cm)
A
3 1/8”
(7.9 cm)
36” min.
(91.4 cm)
A
VGSU 3 1/2” (8.9 cm) min.
DGCU/DGSU 2 1/2” (6.4 cm) min.

5
WOOD/COMPOSITE OVERLAY INSTALLATION
The bottom of the hood should be 30” (76.2 cm) min. to 36” (91.4 cm) above the countertop. This would
typically result in the bottom of the hood being 66” (167.6 cm) to 72” (182.9 cm) above the floor. Refer to the
rangehood installation instructions for further information. These dimensions provide for safe and efficient operation of
the hood.
30” (76.2 cm) min.
36” (91.4 cm) max
30” (76.2 cm) min.
36” (91.4 cm) max
66” - 72”
(167.6 cm -
182.9 cm) 66” - 72”
(167.6 cm -
182.9 cm)
36”
(92.4 cm)
ISLAND INSTALLATION
WALL INSTALLATION
36”
(92.4 cm)
Metal Hood Metal Hood
Wood/Composite Overlay
Wood/Composite Overlay
Countertop Countertop

9
DGCU Burner Box Dimensions
Electric Cord
48” (121.9 cm) Gas
Inlet
1” (2.5 cm)
1 1/4”
(3.2 cm)
19 11/16”
(50.0 cm)
30” W. Model 28 3/4” (73.0 cm)
36” W. Model 34 1/2” (87.6 cm)
45” W. Model 42 7/8” (108.9 cm)
5 3/8”
(13.7 cm)
4 1/4
(10.8 cm)*
DGCU Height Dimension
*NOTE: Minimum cutout height when using a 90oelbow
supplied by installer - 5 5/8” (14.3 cm)
DGCU CUTOUT DIMENSIONS
Cutout
Opening
19 3/4”
(50.2 cm)
BB
MMiinn..MMaaxx..
3300””WW..228833//44””((7733..00ccmm))229977//88””((7755..99ccmm))
3366””WW..334411//22””((8877..66ccmm))335577//88””((9911..11ccmm))
4455””WW..442277//88””((110088..99ccmm))444411//88””((111122..11ccmm))
BB

11
Cutout
Opening 19 3/4” (50.2 cm) Minimum
20 1/8” (51.1 cm) Maximum
DGSU CUTOUT DIMENSIONS
DGSU BURNER BOX DIMENSIONS
Electric Cord
48” (121.9 cm) Gas
Inlet
1 1/16”
(2.7 cm)
1 1/16”
(2.7 cm)
3 1/16”
(7.8 cm)
30” W. Model 29 1/8” (74.0 cm)
36” W. Model 34 7/8” (88.6 cm)
19 3/4”
(50.2 cm)
CC
CC
MMiinn..MMaaxx..
3300””WW..29 1/8” (74.0 cm) 29 7/8” (75.9 cm)
3366””WW..34 7/8” (88.6 cm) 35 7/8” (91.1 cm)