Vinotemp VT-8TEDTS-ID User manual

A PROUD HERITAGE OF EXPERIENCE & QUALITY
THERMOELECTRIC WINE COOLER
VT-8TEDTS-ID (8 bottle)
OWNER’S MANUAL
WWW.VINOTEMP.COM

Your Wine Cellar
This unit can be used for storage and/or service. The unit has a glass door and
soft interior light to elegantly display your wine.
Serving Wines
Storing wines at the proper temperature is important. To preserve them as long
as possible, wine should be stored at approximately 55° Fahrenheit. However,
the chart below suggests the optimal drinking temperature for the different
styles of wine.
°C °F Wine Style
19 66 Armagnac, Brandy, Cognac
18 64 Full Bodied Red wines, Shiraz
17 62 Tawny Port
15 59 Medium Bodied Red Wines
14 57 Amontillado Sherry
13 55 Light Bodied Red Wines
12 54 Full Bodied White Wines
11 52 Medium Bodied White Wines
10 50 Rosé, Light Bodied White Wines
9 48 Vintage Sparkling
8 46 Fino Sherry
7 45 Non Vintage Sparkling
2
WWW.VINOTEMP.COM

General Operating Instructions
Remove all external and internal packaging from your wine cellar. Be sure
that all parts have been included before discarding any packaging
materials. You may want to keep the box and packing materials for use at
a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it
is damaged. Contact our customer service at 1-800-777-8466 or
[email protected].
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
-Save these instructions-
3
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.........................5
ELECTRICAL CONNECTION ......................................5
COOLER DIAGRAM..................................................6
CIRCUIT DIAGRAM .................................................6
TECHNICAL DATA...................................................7
INSTALLATION INSTRUCTIONS ................................7
OPERATING YOUR WINE COOLER .............................8
TEMPERATURE CONTROL.........................................8
CARE AND MAINTENANCE .......................................9
MOVING YOUR WINE COOLER..................................9
PROBLEMS WITH YOUR WINE COOLER......................9
TROUBLESHOOTING .............................................10
TERMS OF SALE AND WARRANTY ...........................11
SERVICE & IMPORTANT NOTICE.............................12
4
WWW.VINOTEMP.COM

IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury when using your appliance,
follow these precautions:
•Do not use if supply cord is damaged. If damaged, it must be replaced by
the manufacturer or a similarly qualified person in order to avoid hazard.
•Ensure the cellar is always unplugged before cleaning.
•To clean the cellar, use only mild detergents or glass cleaning products.
Do not use harsh detergents or solvents.
•Do not store food in wine cellar, as interior temperature may not be cool
enough to prevent spoilage.
•Keep appliance away from heat source or direct sunlight.
•For stability, the appliance must be placed on a solid, flat surface. It
should not be laid on any soft material.
•Do not place any other appliance or heavy objects on top of the wine
cellar.
•The wine cooler is an electrical appliance. To avoid injury or death from
electrical shock, do not operate the wine cooler with wet hands, while
standing on a wet surface or in other wet conditions.
•When positioned or if moving the appliance, ensure that it is not set
horizontally, positioned at an angle of more than 45°, or turned upside
down.
•Never lift or carry the wine cellar by the cord.
•Keep the cord away from heated surfaces.
•This wine cellar is for household/indoor use only. Any other use will void
the warranty.
•Do not plug into the power socket before set up is completed.
•Always unplug an appliance from outlet when not in use. Never pull cord
to remove plug from outlet. Grasp plug and pull to disconnect.
•WARNING: Risk of child entrapment. Before you throw away your old
wine cellar, take off the door and leave the shelves in place so that
children may not easily climb inside.
•Never allow children to operate, play with, or crawl inside the appliance.
•Never clean appliance parts with flammable fluids. The fumes can create a
fire hazard or explosion.
•Do not store or use gasoline or any other flammable vapors and liquids in
the vicinity of this or any other appliances. The fumes can create a fire
hazard or explosion.
ELECTRICAL CONNECTION
For your protection, this unit is equipped with a 3-conductor
cord set that has a molded 3-prong grounding-type plug, and
should be used in combination with a properly connected
grounding-type outlet.
It is strongly recommended that you do not use an
adapter or an extension cord with this unit.
5
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

COOLER DIAGRAM
1. Door 5. Shelves (2 Total)
2. Integrated Door Handle 6. Cold Sink Fan Cover
3. In Door Storage
4. Interior Light 7. Leveling Legs
CIRCUIT DIAGRAM
6
WWW.VINOTEMP.COM

TECHNICAL DATA
Model No. VT-8TEDTS-ID
Voltage AC 110V
Frequency 60 Hz
Ambient Temperature Range 72°- 78°F
Control Temperature Range 46°- 64°F
Power Consumption 0.5 kWh/24h
Net Weight 22.7 lbs
Gross Weight 26.9 lbs
Dimensions (W x D x H) 10.25" x 23.875" x 16.125"
Box Dimensions (W x D x H) 12.01" x 25.79" x 18.11"
** Please Note: Wine bottles over 12.8 in. high will not fit in the in-door storage
compartment.
INSTALLATION INSTRUCTIONS
Before Using your Wine Cellar:
•Remove the exterior and interior packing.
•Check to be sure you have the following parts:
o2 Shelves
o2 Bottle Stoppers
o1 Instruction Manual
•Clean the interior surface with lukewarm water using a soft cloth.
•This wine chiller is designed for free standing installation only.
•Place your wine cooler on a surface that is strong enough to support
it when it is fully loaded.
•Allow 6 inches of space between the back and 10-12 inches on each
side of the refrigerator to allow the proper air circulation to cool the
heat sink.
•Place the wine chiller away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption.
•This wine chiller uses thermoelectric refrigeration technology (no
compressor) and is not designed for storage in hot areas like
garages, warehouses or outdoors since it is designed to operate at a
maximum of 30 degrees below the ambient temperature.
•Plug the wine chiller into an exclusive, properly installed-grounded
wall outlet. Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a
certified electrician or an authorized service center.
•After plugging the wine chiller into a wall outlet, allow the unit to
cool down for 2-3 hours before placing any items in the
compartment.
7
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

OPERATING YOUR WINE COOLER
It is recommended you install the wine cooler in a place where the
ambient temperature is between 72º-78ºF. If the ambient temperature is
above or below recommended temperatures, the performance of the unit
may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate and the range of
46º-64ºF may not be reached.
TEMPERATURE CONTROL
Your wine cooler has a control panel located on the upper part of the
glass door.
9. Control Panel “Light” Button 12. Temperature UP Button
10. ºF / ºC Display Selector Button 13. Temperature DOWN Button
11. Digital Display Window
Setting the temperature:
You can manually adjust the temperature inside your wine cooler. Simply
press the Temperature DOWN Button on the control panel to decrease the
temperature and the Temperature UP Button to increase the temperature
by 1 degree increments. To switch the temperature display from showing
Celsius and Fahrenheit, press the C/F button.
Interior Light:
You can turn the interior light ON or OFF by pushing the button marked
with the “bulb” symbol.
8
WWW.VINOTEMP.COM

CARE AND MAINTENANCE
•Always unplug the unit before cleaning or performing maintenance.
•Never use harsh cleansers or scouring pads to clean any part of the
unit.
•Turn off the power, unplug the appliance and remove all items
including shelves.
•Clean the inside surfaces with a warm water and baking soda
solution. The solution should be about 2 tablespoons of baking soda
to a quart of water.
•Wash the shelves with a mild detergent solution.
•Wring excess water out of the sponge or cloth before cleaning
control panels or any electrical parts.
•Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
Defrosting:
•The unit defrosts automatically.
•The evaporator behind the rear wall of the unit defrosts
automatically.
•The condensation collects in the drainage channel behind the rear
wall of the unit. It flows through the drainage hole into the drip tray
by the compressor where it evaporates.
MOVING YOUR WINE COOLER
Before moving your wine cooler, first be sure to remove all items from the
cooler.
•Securely tape down any loose items, such as shelves, inside the unit.
•Turn the adjustable leg up to the base to avoid damage.
•Tape the door shut.
•Ensure that the unit stays securely in the upright position during
transportation. Protect the outside of the appliance with a blanket or
similar item.
9
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

PROBLEMS WITH YOUR WINE COOLER
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestions below to see if you can
solve the problem before contacting Vinotemp at [email protected].
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE
Door will not close
properly.
•The wine cellar is not level.
•The shelves are out of position.
•The door gasket is dirty.
•A bottle in the cellar is too long.
Unit does not
operate—does not
have power.
•Check that unit is plugged into the wall socket.
•Make sure the wall socket has power. If outlet is
controlled by a wall switch, make sure switch is set to
on. Test wall socket functionality by testing another
electrical appliance in the power socket.
Power is ON but the
unit will not cool. •Make sure there are at least 3 to 5 bottles in the unit. When using the unit for the first time, it can take up to
24 hours to reach the desired temperature.
•If the room temperature is at the high end of the
ambient temperature range, it may have more
difficulty achieving a low internal temperature.
•To achieve accurate temperature control, the unit
should not be used or operated in any of the following
locations:
oIn a sunny place, a room with poor air circulation
such as a garage or near another heat-producing
appliance such as a dishwasher, oven or
refrigerator.
oWith an outlet shared with a refrigerator, as the
refrigerator will drain power from the wine cellar.
•Make sure the cooler has proper clearances at side and
rear and is located in a well-ventilated area.
•Door is not closed tightly or is being opened too
frequently.
Vibrations •Check to make sure the wine cellar is level.
Frost appears in
cooler (on back). •Either too much humidity or too low of temperature inside cooler. Unplug the cooler and allow it to
manually defrost. Reconnect when ice has melted. If
problem persists, contact the manufacturer for service
instructions.
Interior light does
not turn on. •The unit is not plugged in. •The circuit breaker tripped or there is a blown fuse.
•The light button is “OFF”.
10
WWW.VINOTEMP.COM