VIPA TP 610C User manual

TP | 62K-JID0 | Manual
HB160 | TP | 62K-JID0 | GB | 15-36
VIPA HMI
Touch Panel - TP 610C

62K-JID0_000_TP610C,1,GB - © 2015
VIPA GmbH
Ohmstr. 4
91074 Herzogenaurach
Telephone: [phone]
Fax: [phone]
Email: [email protected]
Internet: www.vipa.com

Table of contents
1 General...................................................................................... 4
1.1 Copyright © VIPA GmbH ................................................... 4
1.2 About this manual.............................................................. 5
1.3 Safety information.............................................................. 6
2 Hardware description.............................................................. 8
2.1 Safety information for users............................................... 8
2.2 Properties........................................................................... 9
2.3 Structure........................................................................... 10
2.3.1 Overview....................................................................... 10
2.3.2 Interfaces...................................................................... 11
2.3.3 Memory management................................................... 13
2.4 Dimensions...................................................................... 14
2.5 General data.................................................................... 16
2.6 Technical data.................................................................. 17
2.6.1 62K-JID0-CB................................................................. 17
2.6.2 62K-JID0-CX................................................................. 20
3 Deployment Touch Panel...................................................... 23
3.1 Installation........................................................................ 23
3.2 Commissioning................................................................. 25
3.2.1 VIPA Startup-Manager.................................................. 25
3.3 Connection to a PLC system............................................ 29
3.4 Operating system WindowsÒ Embedded CE 6.0 Prof...... 29
3.4.1 General......................................................................... 29
3.4.2 Structure........................................................................ 31
3.5 Communication via ActiveSync........................................ 35
3.6 Integrated Server............................................................. 37
3.6.1 General......................................................................... 37
3.6.2 ftp server....................................................................... 38
3.6.3 http server..................................................................... 39
3.6.4 Telnet server................................................................. 40
3.6.5 VNC server.................................................................... 41
3.7 Access to the network resources..................................... 42
4 Installation Guidelines........................................................... 45
4.1 Basic rules for the EMC-equitable assembly of installa-
tions.................................................................................. 45
4.2 EMC-equitable assembly................................................. 47
4.3 EMC-equitable cabling..................................................... 48
4.4 Special precautions providing high noise immunity......... 51
4.5 Checklist for the EMC-compliant installation of control-
lers................................................................................... 53
VIPA HMI Table of contents
HB160 | TP | 62K-JID0 | GB | 15-36 3

1 General
1.1 Copyright © VIPA GmbH
This document contains proprietary information of VIPA and is not to
be disclosed or used except in accordance with applicable agree-
ments.
This material is protected by the copyright laws. It may not be repro-
duced, distributed, or altered in any fashion by any entity (either
internal or external to VIPA), except in accordance with applicable
agreements, contracts or licensing, without the express written con-
sent of VIPA and the business management owner of the material.
For permission to reproduce or distribute, please contact: VIPA,
Gesellschaft für Visualisierung und Prozessautomatisierung mbH
Ohmstraße 4, D-91074 Herzogenaurach, Germany
Tel.: [phone]
Fax.: [phone]
EMail: [email protected]
http://www.vipa.com
Every effort has been made to ensure that the information
contained in this document was complete and accurate at
the time of publishing. Nevertheless, the authors retain the
right to modify the information.
This customer document describes all the hardware units
and functions known at the present time. Descriptions may
be included for units which are not present at the customer
site. The exact scope of delivery is described in the
respective purchase contract.
Hereby, VIPA GmbH declares that the products and systems are in
compliance with the essential requirements and other relevant provi-
sions. Conformity is indicated by the CE marking affixed to the
product.
For more information regarding CE marking and Declaration of Con-
formity (DoC), please contact your local VIPA customer service
organization.
All Rights Reserved
CE Conformity Declara-
tion
Conformity Information
VIPA HMIGeneral
Copyright © VIPA GmbH
HB160 | TP | 62K-JID0 | GB | 15-36 4

VIPA, SLIO, System 100V, System 200V, System 300V, System
300S, System 400V, System 500S and Commander Compact are
registered trademarks of VIPA Gesellschaft für Visualisierung und
Prozessautomatisierung mbH.
SPEED7 is a registered trademark of profichip GmbH.
SIMATIC, STEP, SINEC, TIA Portal, S7-300 and S7-400 are regis-
tered trademarks of Siemens AG.
Microsoft and Windows are registered trademarks of Microsoft Inc.,
USA.
Portable Document Format (PDF) and Postscript are registered trade-
marks of Adobe Systems, Inc.
All other trademarks, logos and service or product marks specified
herein are owned by their respective companies.
Contact your local VIPA Customer Service Organization representa-
tive if you wish to report errors or questions regarding the contents of
this document. If you are unable to locate a customer service centre,
contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Telefax: [phone]
EMail: [email protected]
Contact your local VIPA Customer Service Organization representa-
tive if you encounter problems with the product or have questions
regarding the product. If you are unable to locate a customer service
centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Tel.: [phone] (Hotline)
EMail: [email protected]
1.2 About this manual
This manual describes the Touch Panel 62K-JID0-... from VIPA. It
contains a description of the structure, project engineering and
deployment.
Product Order number as of state:
HW BS
TP 610C 62K-JID0-... 01 WindowsÒ CE 6.0 Prof.
The manual is targeted at users who have a background in automa-
tion technology.
The manual consists of chapters. Every chapter provides a self-con-
tained description of a specific topic.
Trademarks
Information product
support
Technical support
Objective and contents
Target audience
Structure of the manual
VIPA HMI General
About this manual
HB160 | TP | 62K-JID0 | GB | 15-36 5

The following guides are available in the manual:
nAn overall table of contents at the beginning of the manual
nReferences with page numbers
The manual is available in:
nprinted form, on paper
nin electronic form as PDF-file (Adobe Acrobat Reader)
Important passages in the text are highlighted by following icons and
headings:
DANGER!
Immediate or likely danger. Personal injury is possible.
CAUTION!
Damages to property is likely if these warnings are not
heeded.
Supplementary information and useful tips.
1.3 Safety information
The Touch Panels are constructed and produced for:
nVIPA CPUs 01x, 11x, 21x, 31x, 51x and S7-300/400 from Sie-
mens
ncommunication and process control
nindustrial applications
noperation within the environmental conditions specified in the
technical data
ninstallation into a cubicle
DANGER!
This device is not certified for applications in
–in explosive environments (EX-zone)
The manual must be available to all personnel in the
nproject design department
ninstallation department
ncommissioning
noperation
Guide to the document
Availability
Icons Headings
Applications con-
forming with specifica-
tions
Documentation
VIPA HMIGeneral
Safety information
HB160 | TP | 62K-JID0 | GB | 15-36 6

CAUTION!
The following conditions must be met before using or
commissioning the components described in this
manual:
– Hardware modifications to the process control system
should only be carried out when the system has been
disconnected from power!
–Installation and hardware modifications only by prop-
erly trained personnel.
– The national rules and regulations of the respective
country must be satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!Disposal
VIPA HMI General
Safety information
HB160 | TP | 62K-JID0 | GB | 15-36 7

2 Hardware description
2.1 Safety information for users
VIPA modules make use of highly integrated components in MOS-
Technology. These components are extremely sensitive to over-vol-
tages that can occur during electrostatic discharges. The following
symbol is attached to modules that can be destroyed by electrostatic
discharges.
The Symbol is located on the module, the module rack or on packing
material and it indicates the presence of electrostatic sensitive equip-
ment. It is possible that electrostatic sensitive equipment is destroyed
by energies and voltages that are far less than the human threshold
of perception. These voltages can occur where persons do not dis-
charge themselves before handling electrostatic sensitive modules
and they can damage components thereby, causing the module to
become inoperable or unusable. Modules that have been damaged
by electrostatic discharges can fail after a temperature change,
mechanical shock or changes in the electrical load. Only the conse-
quent implementation of protection devices and meticulous attention
to the applicable rules and regulations for handling the respective
equipment can prevent failures of electrostatic sensitive modules.
Modules must be shipped in the original packing material.
When you are conducting measurements on electrostatic sensitive
modules you should take the following precautions:
nFloating instruments must be discharged before use.
nInstruments must be grounded.
Modifying electrostatic sensitive modules you should only use sol-
dering irons with grounded tips.
CAUTION!
Personnel and instruments should be grounded when
working on electrostatic sensitive modules.
Handling of electro-
static sensitive modules
Shipping of modules
Measurements and
alterations on electro-
static sensitive modules
VIPA HMIHardware description
Safety information for users
HB160 | TP | 62K-JID0 | GB | 15-36 8

2.2 Properties
The VIPA Touch Panel allows you to visualize and alter operating
states and recent process values of a connected PLC. The Touch
Panel is a compact and modular embedded PC based on WindowsÒ
CE. Besides the extensive WindowsÒ CE functions the Touch Panel
offers varied communication possibilities. Here the Touch Panel can
simply be configured, controlled and remoted.
nWindowsÒ CE 6.0 Prof.
n62K-JID0-CB: Movicon 11 CE Standard (4096 I/O bytes)
nProcessor Xscale, 1.1GHz
nWork memory 256Mbyte
nUser memory 512Mbyte
n380Mbyte memory for user data
nCF-Card II and MMC/SD card slot
nRS232, RS422/485, MPI, PROFIBUS DP slave, Ethernet, USB-A
and USB-B interfaces
nRobust aluminium die casting case
nDisplay SVGA 800 x 600 / 600 x 800 (16M colors)
nBattery backed clock
nResistive touch screen
nEasy mounting via integrated pivoted lever
nProtection class IP65 (frontal)
Order data
Type Order number Description
TP 610C 62K-JID0-... 10.4" SVGA, TFT color, MPI/PROFIBUS DP/RS485,
RS232, RS422/485, 2xUSB-A, USB-B, 2xEthernet
RJ45 (Switch)
General
VIPA HMI Hardware description
Properties
HB160 | TP | 62K-JID0 | GB | 15-36 9

2.3 Structure
2.3.1 Overview
1 Slot for storage medium (CF, SD/MMC)
2 Connection for interfaces and power supply
3 Display with touch sensitive area (touch screen)
1 Compact Flash
2 MMC / SD
1 RS422/485 interface COM 2
2 RS232 interface COM 1
3 MPI/PROFIBUS DP/RS485 interface
4 2x "Host"-USB-A interfaces
5 "Slave"-USB-B interface
6 RJ45 jack for Ethernet communication
7 RJ45 jack for Ethernet communication
8 Slot for DC 24V voltage supply
9 Slot for CF/SD/MMC storage medium
Front view
Side view
Bottom view (Inter-
faces)
VIPA HMIHardware description
Structure > Overview
HB160 | TP | 62K-JID0 | GB | 15-36 10

Please make sure that the Touch Panel always has to be
supplied with external voltage!
2.3.2 Interfaces
9 pin SubD jack
nLogical states represented by voltage differences between the 4
cores
nSerial bus connection in 4-wire technology using full duplex mode
nData communications up to a max. distance of 500m
nData communication rate up to 115.2kBaud
nSerial bus connection in 2-wire technology using half duplex mode
RS422/485 interface
VIPA HMI Hardware description
Structure > Interfaces
HB160 | TP | 62K-JID0 | GB | 15-36 11

9 pin SubD plug
nInterface is compatible to the COM interface of a PC
nLogical signals as voltage levels
nPoint-to-point links with serial full-duplex transfer in two-wire tech-
nology up to 15m distance
nData transfer rate up to 115.2kbit/s
9 pin SubD jack
An RJ45 jack provides the interface to the twisted pair cable, required
for Ethernet.
Using the "Host"-USB-A interface USB mouse, keyboard, stick or
USB hard discs can be connected.
For project transfer with Microsoft ActiveSync a programming cable
can be connected using the "Slave"-USB-B interface.
The USB-A interface of your PC can be connected to the "Slave"-
USB-B interface of your Touch Panel deploying the USB program-
ming cable.
The USB programming cable is delivered by VIPA with order No.
670-0KB10.
RS232 interface
MPI/PROFIBUS DP
interface
Ethernet connection
"Host"-USB-A
"Slave"-USB-B
VIPA HMIHardware description
Structure > Interfaces
HB160 | TP | 62K-JID0 | GB | 15-36 12

The Touch Panel has got an integrated power supply. The power
supply has to be provided with DC 24V (20.4 ... 28.8V). For this you
find an according DC 24V slot on the bottom side.
The power supply is protected against inverse polarity and overcur-
rent. The battery for the clock of the Touch Panel is an accumulator
with a suitable charging circuit. This accumulator is maintenance-free
and does not need to be exchanged within the life span of the Touch
Panel.
2.3.3 Memory management
The following memory systems are available for every Touch Panel:
n256Mbyte work memory
n512Mbyte user memory (ca. 380Mbyte for user data)
nUSB storage media connected via "Host"-USB-A interface
nSlot for CF (Type II)
nSlot for MMC/SD
Please only use memory cards formatted with FAT(32)!
Every Touch Panel has a work memory with a size of 256Mbyte. The
work memory is not buffered and is deleted after shut down. Please
consider that also registry entries are stored in the work memory that
are set back to default settings after the next re-boot. You can save
them permanently by means of the KuK Tools (within consignment).
As internal permanent storage medium every Touch Panel has a
flash disc with a size of 512Mbyte (about 380Mbyte user data). After
the start of WindowsÒ CE this memory is listed as Flashdiskunder My
Device.
The connection of USB sticks and USB drives by use of the "Host"-
USB-A interface is supported by the Touch Panel. After connection
the storage media is listed as Hard Disk under My Device.
Here you can plug a CompactFlashÒ type II. The card may be
plugged and removed during runtime and is immediately listed as
Storage Card at My Device.
Every CompactFlashÒ storage module has a pulling edge. Hold the
CompactFlash in the way that the pulling edge points to the left side.
Push the storage module without much power into the slot until the
impact. To remove the card touch it at the pulling edge and pull.
On this slot you can plug storage modules of the type SD or MMC.
The card may be plugged and removed during runtime and is immedi-
ately listed as SDMMC Card at My Device.
Please take care to plug the according card as shown on the back of
the Touch Panel.
Power supply
Overview
Work memory
User memory
USB storage media
Slot for CF
Slot for SD/MMC
VIPA HMI Hardware description
Structure > Memory management
HB160 | TP | 62K-JID0 | GB | 15-36 13

On the left side of the Touch Panel are the card slots for memory
cards. The cards are visibly covered by a security flap and are thus
secured from slipping out.
Please take care to pull the security flap back before plugging or
pulling a memory card like shown in the illustration and put it back
again afterwards. When plugging, the security flap additionally snaps
into position above the plugged memory card.
2.4 Dimensions
For the installation of the Touch Panel in control cabinets and desks
the following dimensions are necessary:
Front panel width 1.5 ... 6mm
Installation cutting (W x H) 287 x 217mm
Front panel (W x H) 304 x 233mm
Rear panel (W x H x D) 285 x 215 x 45mm
Installation depth 45mm
Security flap for
memory cards
Installation dimensions
10.4" - 62K-JID0-...
VIPA HMIHardware description
Dimensions
HB160 | TP | 62K-JID0 | GB | 15-36 14

The degrees of protection are only guaranteed when the
following is observed:
–Material thickness at the mounting cut-out: 1.5 ... 6mm
–The deviation from the plane for the panel cut-out is
£
0.5mm. This condition must be fulfilled for the mounted
HMI device.
–Permissible surface roughness in the area of the seal:
£ 120µm (friction coefficient 120)
VIPA HMI Hardware description
Dimensions
HB160 | TP | 62K-JID0 | GB | 15-36 15

2.5 General data
Conformity and approval
Conformity
CE 2006/95/EG Low-voltage directive
2004/108/EG EMC directive
Approval
UL UL 508 Approval for USA and Canada
others
RoHS 2011/65/EU Product is lead-free; Restriction of the use of
certain hazardous substances in electrical and
electronic equipment
Protection of persons and device protection
Type of protection - IP20
Electrical isolation
to the field bus - electrically isolated
to the process level - electrically isolated
Insulation resistance -
Insulation voltage to reference earth
Inputs / outputs - AC / DC 50V, test voltage AC 500V
Protective measures - against short circuit
Environmental conditions to EN 61131-2
Climatic
Storage / transport EN 60068-2-14 -20…+60°C
Operation
Horizontal installation EN 61131-2 0…+50°C
Vertical installation EN 61131-2 0…+50°C
Air humidity EN 60068-2-30 RH1 (without condensation, rel. humidity 10…
95%)
Pollution EN 61131-2 Degree of pollution 2
Mechanical
Oscillation EN 60068-2-6 1g, 9Hz ... 150Hz
Shock EN 60068-2-27 15g, 11ms
VIPA HMIHardware description
General data
HB160 | TP | 62K-JID0 | GB | 15-36 16

Mounting conditions
Mounting place - In the control cabinet
Mounting position - Horizontal and vertical
EMC Standard Comment
Emitted interfer-
ence
EN 61000-6-4 Class A (Industrial area)
Noise immunity
zone B
EN 61000-6-2 Industrial area
EN 61000-4-2 ESD
8kV at air discharge (degree of severity 3),
4kV at contact discharge (degree of severity
2)
EN 61000-4-3 HF field immunity (casing)
80MHz … 1000MHz, 10V/m, 80% AM (1kHz)
1.4GHz ... 2.0GHz, 3V/m, 80% AM (1kHz)
2GHz ... 2.7GHz, 1V/m, 80% AM (1kHz)
EN 61000-4-6 HF conducted
150kHz … 80MHz, 10V, 80% AM (1kHz)
EN 61000-4-4 Burst, degree of severity 3
EN 61000-4-5 Surge, installation class 3 *
*) Due to the high-energetic single pulses with Surge an appropriate external protective circuit with lightning protection elements like conductors
for lightning and overvoltage is necessary.
2.6 Technical data
2.6.1 62K-JID0-CB
Order no. 62K-JID0-CB
Type Touch Panel TP 610C
Display
Display size (diagonal) 10.4 "
Display size (width) 211.2 mm
Display size (height) 158.4 mm
Resolution 600 x 800 / 800 x 600
Aspect ratio 4:3
Type of display TFT color (16.7M colors)
MTBF Backlights (25°C) 50000 h
System properties
Processor Xscale 1.1 GHz
VIPA HMI Hardware description
Technical data > 62K-JID0-CB
HB160 | TP | 62K-JID0 | GB | 15-36 17

Order no. 62K-JID0-CB
Operating system Windows CE 6.0 Prof.
User software Movicon 11 CE Standard
Work memory 256 MB
User memory 512 MB
Available memory (user data) 380 MB
SD/MMC Slot ü
CF Card Slot Typ II ü
CFast Slot -
Time
Real-time clock buffered ü
Clock buffered period (min.) 6 w
Type of buffering Vanadium Rechargeable Lithium Battery
Load time for 50% buffering period 10 h
Load time for 100% buffering period 48 h
Accuracy (max. deviation per day) 10 s
Operating controls
Touchscreen resistive
Touch function Single Touch
Keyboard external via USB
Mouse external via USB
Interfaces
MPI, PROFIBUS-DP RS485 isolated
MPI, PROFIBUS-DP connector Sub-D, 9-pin, female
Serial, COM1 RS232
COM1 connector Sub-D, 9-pin, male
Serial, COM2 RS422/485 isolated
COM2 connector Sub-D, 9-pin, female
Number of USB-A interfaces 2
USB-A connector USB-A (host)
Number of USB-B interfaces 1
USB-B connector USB-B (device)
Number of ethernet interfaces 2
Ethernet Ethernet 10/100 MBit
Ethernet connector RJ45
Integrated ethernet switch ü
Video connectors -
VIPA HMIHardware description
Technical data > 62K-JID0-CB
HB160 | TP | 62K-JID0 | GB | 15-36 18

Order no. 62K-JID0-CB
Audio connections -
Technical data power supply
Power supply (rated value) DC 24 V
Power supply (permitted range) DC 20.4...28.8 V
Reverse polarity protection ü
Current consumption (no-load operation) 0.51 A
Current consumption (rated value) 0.7 A
Inrush current 7 A
I²t 0.25 A²s
Power loss 12.2 W
Status information, alarms, diagnostics
Supply voltage display yes
Mechanical data
Housing / Protection type
Material die-cast aluminum
Mounting via integrated pivoted lever
Protect type front side IP 65
Protect type back side IP 20
Dimensions
Front panel 304 mm x 233 mm x 7.5 mm
Rear panel 285 mm x 215 mm x 45 mm
Installation cut-out
Width 287 mm
Height 217 mm
Minimum 1.5 mm
Maximum front panel thickness 6 mm
Weight 3251 g
Environmental conditions
Operating temperature 0 °C to 50 °C
Storage temperature -20 °C to 60 °C
Certifications
UL certification in preparation
VIPA HMI Hardware description
Technical data > 62K-JID0-CB
HB160 | TP | 62K-JID0 | GB | 15-36 19

2.6.2 62K-JID0-CX
Order no. 62K-JID0-CX
Type Touch Panel TP 610C
Display
Display size (diagonal) 10.4 "
Display size (width) 211.2 mm
Display size (height) 158.4 mm
Resolution 600 x 800 / 800 x 600
Aspect ratio 4:3
Type of display TFT color (16.7M colors)
MTBF Backlights (25°C) 50000 h
System properties
Processor Xscale 1.1 GHz
Operating system Windows CE 6.0 Prof.
User software -
Work memory 256 MB
User memory 512 MB
Available memory (user data) 380 MB
SD/MMC Slot ü
CF Card Slot Typ II ü
CFast Slot -
Time
Real-time clock buffered ü
Clock buffered period (min.) 6 w
Type of buffering Vanadium Rechargeable Lithium Battery
Load time for 50% buffering period 10 h
Load time for 100% buffering period 48 h
Accuracy (max. deviation per day) 10 s
Operating controls
Touchscreen resistive
Touch function Single Touch
Keyboard external via USB
Mouse external via USB
Interfaces
MPI, PROFIBUS-DP RS485 isolated
MPI, PROFIBUS-DP connector Sub-D, 9-pin, female
Serial, COM1 RS232
VIPA HMIHardware description
Technical data > 62K-JID0-CX
HB160 | TP | 62K-JID0 | GB | 15-36 20