Viper AS6690T User manual

AS7190TO
AS6690T & AS7690T
AS6690T & AS7690T / AS7190TO
QUICK START GUIDE
Model No.: 50000569/50000570/50000571/50000575
VS14022 Rev B Jan. 2020

AS6690T, AS7690T, AS7190TO
EU / UE / EL / EC / EE / ES / EÚ / AB
Declaration of Conformity
Prohlášení o shodě
Konformitätserklärung
Overensstemmelseserklæ ring
Declaración de conformidad
Vastavusdeklaratsioon
Déclaration de conformité
Vaatimustenmukaisuusvakuutus
Декларация за съответствие
Δήλωση συμμόρφωσης
Megfelelősségi nyilatkozat
Izjava o sukladnosti
Dichiarazione di conformità
Atitikties deklaracija
Atbilstības deklarācija
Samsvarserklæ ring
Conformiteitsverklaring
Declaração de conformidade
Deklaracja zgodności
Declaratie de conformitate
Декларация осоответствии
Försäkran om överensstämmelse
Vyhlásenie o zhode
Izjava o skladnosti
Uygunluk beyanı
Manufacturer / Výrobce / Hersteller / Fabrikant / Fabricante / Κατασκευαστής /
Gyártó / Proizvođač / Fabbricante / Gamintojas / Ražotājs / Produsent / Fabrikant /
Fabricante / Producent / Producător / производитель / Tillverkaren / Výrobca /
Proizvajalec/ Ü retici firma:
Nilfisk A/S, Kornmarksvej 1
DK-2605 Broendby, DENMARK
Product / Produkt / Producto, Toode, Produit, Tuote/ Πродукт /
Προϊόν / Termék / Proizvod / Prodotto / Produktas / Produkts /
Artikel / Produtos / Produs / Izdelek / Ü rün
Description / Popis / Beschreibung /
Beskrivelse / Descripción / Kirjeldus / La
description / Kuvaus / Oписание /
Περιγραφή / Leirás / Opis / Descrizione /
Aprašymas / Apraksts / Beschrijving /
Descrição / Descriere / Beskrivning / Popis /
Açıklama
We, Nilfisk hereby declare under our sole
responsibility, that the above mentioned product(s)
is/are in conformity with the following directives
and standards.
My, Nilfisk prohlašujeme na svou výlučnou
odpovědnost, že výše uvedený výrobek je ve
shodě s následujícími směrnicemi a normami.
Wir, Nilfisk erklären in alleiniger Verantwortung,
dass das oben genannte Produkt den folgenden
Richtlinien und Normen entspricht.
Vi, Nilfisk erklæ rer hermed under eget ansvar at
ovennæ vnte produkt(er) er i overensstemmelse
med følgende direktiver og standarder.
Nosotros, Nilfisk declaramos bajo nuestra única
responsabilidad que el producto antes
mencionado está en conformidad con las
siguientes directivas y normas
Meie, Nilfisk Käesolevaga kinnitame ja kanname
ainuisikulist vastutust, et eespool nimetatud toode
on kooskõlas järgmiste direktiivide ja
Nilfisk déclare sous notre seule responsabilité que
le produit mentionné ci-dessus est conforme aux
directives et normes suivantes.
Me, Nilfisk täten vakuutamme omalla vastuulla,
että edellä mainittu tuote on yhdenmukainen
seuraavien direktiivien ja standardien mukaisesti
Ние, Nilfisk Снастоящото декларираме на своя
лична отговорност, че посочените по-горе
продуктът евсъответствие със следните
директиви истандарти.
Εμείς, Nilfisk δηλώνουμε με αποκλειστική μας
ευθύνη, ότι το προαναφερόμενο προϊόν
συμμορφώνεται με τις ακόλουθες οδηγίες και
πρότυπα.
Mi, Nilfisk Kijelentjük, egyedüli felelősséggel, hogy
a fent említett termék megfelel az alábbi
irányelveknek és szabványoknak
Mi, Nilfisk Izjavljujemo pod punom odgovornošću,
da gore navedeni proizvod u skladu sa sljedećim
direktivamai standardima.
Noi, Nilfisk dichiara sotto la propria responsabilità,
che il prodotto di cui sopra è conforme alle
seguenti direttive e norme.
Mes, "Nilfisk pareiškiu vienašališkos atsakomybės,
kad pirmiau minėtas produktas atitinka šias
direktyvas ir standartus
Mēs, Nilfisk šo apliecinu ar pilnu atbildību, ka
iepriekš minētais produkts atbilst šādām
direktīvām un standartiem
Vi, Nilfisk erklæ rer herved under eget ansvar, at
det ovennevnte produktet er i samsvar med
følgende direktiver og standarder
We verklaren Nilfisk hierbij op eigen
verantwoordelijkheid,dat het bovengenoemde
product voldoet aan de volgende richtlijnen en
normen
Nós, a Nilfisk declaramos, sob nossa exclusiva
responsabilidade, que o produto acima
mencionado está em conformidade com as
diretrizes e normas a seguir.
My, Nilfisk Niniejszym oświadczamy z pełną
odpowiedzialnością, że wyżej wymieniony produkt
jest zgodny z następującymi dyrektywami i
normami..
Noi, Nilfisk Prin prezenta declarăm pe propria
răspundere, că produsul mai sus menționat este în
conformitate cu următoarele standarde și
directive.
Мы, Nilfisk настоящим заявляем под нашу
полную ответственность,что
вышеперечисленные
продукция соответствует следующими
директивам истандартам.
Vi Nilfisk förklarar härmed under eget ansvar att
ovan nämnda produkt överensstämmer med
följande direktiv och normer.
My, Nilfisk prehlasujeme na svoju výlučnú
zodpovednosť, že vyššie uvedený výrobok je v
zhode s nasledujúcimi smernicami a normami.
Mi, Nilfisk izjavljamo s polno odgovornostjo, da je
zgoraj omenjeni izdelek v skladu z naslednjimi
smernicami in standardi.
Nilfisk, burada yer alan tüm sorumluluklarımıza
göre, yukarıda belirtilen ürünün aşağıdaki
direktifler ve standartlara uygun olduğunu beyan
ederiz.
2006/42/EC EN 60335-1:2012+A11:2014+A13:2017
EN60335-2-72:2012
2014/30/EU EN61000-3-2:2019
EN61000-3-3:2013+A1:2019
EN55012:2007+A1:2009
EN61000-6-2:2019
Authorized Pierre Mikaelsson, Executive Vice President, Global
signatory: Products & Services, Nilfisk NLT
Nov 20, 2019
FC - Floor Scrubber/Sweeper - Battery
Working mode: 24V DC; Charging mode 100-240V
50-60Hz, IPX4

TABLE OF CONTENTS
ENGLISH QUICK START GUIDE...............................................................1-17
БЪЛГАРСКИ КРАТКО РЪКОВОДСТВО.........................................................18-34
ČESKY RYCHLÁ PŘÍRUČKA.................................................................35-51
DEUTSCH SCHNELLSTARTANLEITUNG .................................................52-68
DANSK LYNVEJLEDNING TIL HURTIG OPSTART............................69-85
ΕΛΛΗΝΙΚΆ ΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΚΚΙΝΗΣΗΣ........................................86-102
ESPAÑOL GUÍA RÁPIDA DE UTILIZACIÓN............................................103-119
EESTI KIIRJUHEND ..............................................................................120-136
SUOMI PIKAKÄYNNISTYSOPAS ..........................................................137-153
FRANÇAIS GUIDE DE DÉMARRAGE RAPIDE..........................................154-170
HRVATSKI PRIRUČNIK ZA BRZI POČETAK RADA.................................171-187
MAGYAR GYORS ÜZEMBE HELYEZÉSI ÚTMUTATÓ..........................188-204
ITALIANO GUIDA RAPIDA ALL’USO.........................................................205-221
LIETUVIŠKAI GREITOJO PALEIDIMO VADOVAS.........................................222-238
LATVIEŠU VALODA PAMATA LIETOŠANAS INSTRUKCIJA ..................................239-255
NEDERLANDS SNELSTARTGIDS.......................................................................256-272
NORSK HURTIGSTARTVEILEDNING ..................................................273-289
POLSKI SKRÓCONA INSTRUKCJA URUCHAMIANIA.......................290-306
PORTUGUÊS GUIA DE INÍCIO RÁPIDO.........................................................307-323
ROMÂNĂ GHID PENTRU PORNIRE RAPIDĂ .........................................324-340
РУССКИЙ РУКОВОДСТВО ПО НАЧАЛУ РАБОТЫ................................341-357
SLOVENSKY PRÍRUČKA SO STRUČNÝM NÁVODOM................................358-374
SLOVENŠČINA HITRI VODIČ..............................................................................375-391
SVENSK SNABBSTARTSGUIDE...............................................................392-408
TÜRKÇE HIZLI BAŞLANGIÇ KILAVUZU...............................................409-425

QUICK START GUIDE
ENGLISH
1
INTRODUCTION
CAUTION!
Some general and detailed machine information is not included in this guide.
Please refer to QUICK START GUIDE Manual on supplied CD-ROM reading by Adobe® Reader®.
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
GUIDE PURPOSE AND CONTENTS
The purpose of this quick start guide is to provide the operator with all basic information to use the machine properly.and For information
about technical characteristics, operation, machine inactivity, spare parts and safety conditions etc, please refer to QUICK START
GUIDE manual on supplied CD-ROM.
Before performing any procedure on the machine, the operators and qualified technicians must read the quick start guide Contact our
company in case of doubts concerning the interpretation of the instructions or for any further information.
HOW TO KEEP THIS QUICK START GUIDE
The quick start guide must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause any
damage to it.
DECLARATION OF CONFORMITY
Declaration of Conformity is supplied with the machine and certifies machine conformity with the law in force.
NOTE
The copies of the original declaration of conformity are provided together with the machine documentation.
ACCESSORIES AND MAINTENANCE
All the necessary operation, maintenance and repair procedures must be made by qualified personnel, our company appointed repair
center. ONLY original or approved spare parts and accessories can be used.
Contact our company customer service for any service or purchase of accessories or spare parts if necessary.
CHANGE AND IMPROVEMENT
We committed to continuous improvement of its products, the company reserves the right to the machine changes and improvements
without informing in additional.
SCOPE OF APPLICATION
The scrubber applies to commercial and industrial use. It is suitable for cleaning smooth and solid floor, operating by qualified personnel
in safety circumstance. It is not suitable for outdoor use or carpet or rough floor cleaning.
MACHINE IDENTIFICATION DATA
The machine serial number and model name are marked on the serial label.
This information is useful. Use the following table to write down the machine identification data when requiring spare parts for the
machine.
MACHINE MODEL...........................................................................
MACHINE SERIAL NUMBER.........................................................

QUICK START GUIDE
ENGLISH
2
TRANSPORT AND UNPACKING
When the carrier delivers the machine, make sure the packaging and machine are both whole and undamaged. If any damaged, make the
carrier know the damage and before accepting the goods, reserve the right in compensation of the damage.
Follow the instructions on packing strictly when unpacking the machine.
Check the package to ensure following items are included:
1. Technical documentations quick start guide
2. Parts list (*).
3. Battery connection.
4. Electionic battery charger manual (if installed) (*)
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precau-
tions to safeguard people and property.
VISIBLE SYMBOLS ON THE MACHINE
WARNING!
Read all the instructions carefully before performing any operation on the machine.
WARNING!
Do not wash the machine with direct or pressurized water jets.
WARNING!
Do not use the machine on slopes with a gradient exceeding that is defined in the specification.
SYMBOLS THAT APPEAR ON THE QUICK START GUIDE
DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people.
CAUTION!
It indicates a caution, or a remark related to important or useful functions.
Pay attention to the paragraphs marked by this symbol.
NOTE
It indicates a remark related to important or useful functions.
CONSULTATION
It indicates the necessity to refer to the quick start guide manual before performing any procedure.

QUICK START GUIDE
ENGLISH
3
GENERAL SAFETY INSTRUCTION
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
DANGER!
•This machine must be operated by trained and authorized personnel according to guidance of the manual.
•Before performing any cleaning, maintenance, repair or replacement procedure, read all the instructions carefully,
ensure to turn the machine OFF and disconnect the battery connector.
•Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapour. This
machine is not suitable for collecting dangerous powders.
•Do not wear jewels when working near electrical components.
•Do not work under the lifted machine without supporting it with safety stands.
•When using lead (WET) batteries, they may emit inflammable gas under normal use, must keep sparks, flames,
smoking materials and radiating, illuminating and burning items away from the batteries.
•When charging lead (WET) batteries, they may emit hydrogen gas which may cause explosive. Must ensure the
charging environment is well ventilated and away from naked flames.
WARNING!
•This machine is intended for COMMERCIAL USE, for example in hotels, schools, hospitals, factories, shops, offices
and rental businesses.
•Machines left unattended shall be secured against unintentional movement.
•In order to prevent unauthorized use of the machine, the power source shall be switched off or locked, for example by
removing the key of the main switch or the ignition key.
•Check the machine carefully before each use. Ensure that all the components have been well assembled before use. Or
it may causes damages to people and properties.
•Before using the battery charger, ensure that the values of frequency and voltage indicated on the machine serial
number label match those of mains.
•Never move the machine by pulling the battery charger cable. Do not let the cable through a closed door, or winding
on sharp edges or corners. Do not run the machine on the battery charger cable. Keep the battery charger cable away
from heated surfaces.
Do not charge the batteries if the battery charger cable or the plug are damaged.
•To reduce the risk of fire, electric shock, or injury, make sure machine is off before leaving.
•Use or store the machine indoors in dry conditions, it is not allowed for outdoor use.
•The machine both storage and working temperature must be between 0 °C and +40 °C, the humidity of air must be
between 30% - 95%.
•Do not use the machine on slopes with a gradient exceeding as specification show.
•When using and handling floor cleaning detergents, follow the instructions on the labels of the detergent bottles and
wear suitable gloves and protections.
•Use brushes and pads supplied with the machine or defined in the manual. Using other brushes or pads could reduce
safety.
•In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request assistance
from the authorized personnel or from an authorized Service Center.
•Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
•Do not use the machine in particularly dusty areas.

QUICK START GUIDE
ENGLISH
4
•Do not wash the machine with direct or pressured water jets, or with corrosive substances.
•Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
•Do not lean liquid containers on the machine, use the relevant can holder.
•To avoid damaging the floor, do not allow the brush/pad to operate while the machine is stationary.
•In case of fire, use a dry powder fire extinguisher. Do not use liquid fire extinguishers.
•Do not remove or modify the machine stickers.
•Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
•Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank
and in the hoses could freeze and cause seriously damage to the machine.
•If spare parts need be replaced, order ORIGINAL spare parts from an Authorized Dealers or Retailers.
•Return the machine to the Service Center if it doesn’t work as usual or it is in condition such as damaged, placed
outdoors, dropped into water.
•To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this Manual,
must be performed by the authorized personnel or an authorized Service Center.
•The machine must be properly disposed of, because the presence of toxic-harmful materials (batteries, etc.), which are
subject to standards that require disposal in special centers (see Scrapping chapter).
•This machine as a cleaning tool only, not for any other purpose use.
•Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow. Do not
use the machine if the openings are clogged.
•Use the machine only where a proper lighting is provided.
•This machine is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge.
•Close attention is necessary when used near children.
•Children should be supervised to ensure that they do not play with the machine.
•While using this machine, take care not to cause damage to people or objects.
•Cleaning and user maintenance shall not be made by children without supervision.

QUICK START GUIDE
ENGLISH
5
MACHINE DESCRIPTION
MACHINE STRUCTURE (as shown in Figure 1)
1. Recovery tank lid
2. Can holder
3. Handlebar
4. Control panel
5. Control box
6. Serial number plate/technical data
7. Outlet cover
8. Squeegee knobs
9. Squeegee vacuum hose
10. Squeegee balance adjusting knob
11. Squeegee
12. Solution filter
13. Driving wheels
14. Solution tank
15. Hinge
16. Recovery tank
17. Filter cover
18. Filler hose holder
19. Filter support
20. Tank cover gasket
21. Debris collection box
22. Float ball filter
23. Solution /clean water tap
24. Rear steering wheels
25. Brush system (only for disc machine)
26. Splash guard
27. Orbital head adjusting knob
28. Orbital system (only for orbital machine)
Figure 1
23
1
4
16
15
14
13
25
17
18
19
10 8
11 9
12 8
7
5
20
22
2628
6
21
27
23
24

QUICK START GUIDE
ENGLISH
6
MACHINE STRUCTURE (as shown in Figure 2)
29. Battery connector (red)
30. Batteries (*)
31. Battery caps
32. Water level indicator tube
33. Tank safety cable
34. Vacuum system
35. Safety switch
36. Machine reverse switch
37. Recovery water drain hose
38. Security cover of charging jack
39. Squeegee lifting/lowering handle
40. Solution tank side filler cap
41. On-Board Charger (*)
(*): Optional
Figure 2
33
29
35 36 35
37
38 39 40
34
30
32
31
41

QUICK START GUIDE
ENGLISH
7
CONTROL PANEL (as shown in Figure 3)
41. Multifunction display
Items displayed:
A) Battery type
B) Battery charge level
C) Hours worked
D) ECO mode
E) Vacuum normal mode
F) Vacuum silence mode
G) Reverse mode
H) Extra pressure active
I ) Detergent solution flow quantity
J ) Brush work mode
K) Vacuum mode
L) Floor prep mode
42. Ignition key (0 - I)
43. ECO mode button
·LED on-below function activated
·water flow at minimum (level 1)
·pressure at minimum (level 1)
·The vacuum in silent mode
44. Brush/pad-holder release button (only for disc
machine)
·Flashing LED-Releasing system activated
45. Floor prep button (only for orbital machine)
·Travel speed pre-set to 1Km/hour
·LED on-below function activated
·water flow at minimum (level 1)
·pressure at maximum (level 3)
·The vacuum in normal mode
46. Brush pressure adjusting button
47. Solution flow adjusting button
48. Speed adjuster
49. One-button start
·LED on below-function activated
·water system minimum (level 1)
·pressure at minimum (level 1)
·vacuum system normal
50. Vacuum system adjustment button (press the button 1
second to activation)
·LED on-normal mode
·Flashing LED-Slient mode
1S
0000.H
AGM
R
AGMAGM
AGM AGM
0000.H0000.H
0000.H 0000.H
AGM 0000.H
I
H
K
J
L
BG
D
EF
41
48
49
50
42
43
44 47
46
AC
45
Figure 3

QUICK START GUIDE
ENGLISH
8
TECHNICAL PARAMETERS
Parameter Type
Units
Model
AS6690T
AS7690T
AS7190TO
Solution tank capacity
L / Gal
85 L / 22 Gal.
Recovery tank capacity
L / Gal
90 L / 24 Gal.
Machine Length
mm/Inches
1490 mm/
59 Inches
1550mm/
61 Inches
1490 mm/
59 Inches
Machine width with squeegee
mm/Inches
830mm /
33 Inches
950mm /
38 Inches
Machine width without squeegee
mm/Inches
730 mm/29 Inches
830mm/33 Inches
750mm/30 Inches
Machine Height
mm/Inches
1020 mm / 40.2 Inches
Working width
mm/Inches
660 mm / 26 Inches
760 mm / 30 Inches
710 mm / 28 Inches
Driving wheel diameter
mm/Inches
230 mm / 9 Inches
Driving wheel specific pressure on
the floor
N/mm2
0.67 N/mm2
Rear wheel diameter
mm/Inches
101 mm / 4 Inches
Rear wheel specific pressure on the
floor
N/mm2
0.82 N/mm2
Brush/Pad diameter
mm/Inches
330 mm x 2 /
13 Inches x 2
380mm x 2 /
15Inches x 2
355x710 mm /
14x28 Inches
Brush/Pad pressure (max)
Kg/Lbs.
32 Kg /71 Lbs
41 Kg /90 Lbs
49Kg /108 Lbs
35 Kg /77 Lbs
43Kg /95Lbs
51Kg /112 Lbs
42 Kg / 93 Lbs
54 Kg / 120 Lbs
65 Kg / 143 Lbs
Solution Flow (max) per setting
L / Gal per minute
(0.9/1.5/2.2/3) Liters
(0.24/0.39/0.58/0.79) Gallons
(0.6/1.1/1.9/2.5) Liters
(0.16/0.29/0.5/0.66)
Gallons
Sound pressure level
dB (A)
69 ±3 dB (A)
Sound pressure level in ECO mode or
in silent mode
dB (A)
65±3 dB (A)
Handle Vibration Level (max)
m/s2
< 2.5 m/s2
Climbing capacity (max)
% grade
2%
Min. aisle turn
cm/Inches
155cm/61 Inches
165 cm/65 Inches
160 cm/63 Inches
Drive motor Power
Watt / H.P.
250 W / 0.33 HP
350 W / 0.47 HP
Working Speed
Km / Miles per hour
0 - 4.0Km / 0 –2.5Miles per hour
0 –3.2 Km / 0 –2.0Miles
per hour
Forward speed
Km / Miles per hour
0 - 4.0 Km / 0 - 2.5 Miles per hour
Reverse speed
Km / Miles per hour
0 - 2.0 Km / 0 - 1.25 miles per hour
Vacuum motor power
Watt / H.P.
500 W / 0.66 HP
Vacuum capacity
mm/In of H2O
1500 mm / 60 In of H2O
Vacuum capacity in ECO mode or in
silent mode
mm/In of H2O
900 mm / 35 In of H2O
Brush motor power
Watt / H.P.
500 x 2 Watt / 0.66 x 2 HP
750 Watt / 1.0 HP
Brush speed in normal mode
RPM
200 RPM
2200 RPM
Brush speed in ECO mode
RPM
160 RPM
1600 RPM
IP protection class
IP
IP24
Battery Compartment Size with Off -
board charger (L x W x H)
mm/Inches
(620 x 385 x 390) mm / 24.4 x 15.1 x 15.3 Inches
Battery Compartment Size with on-
board charger (L x W x H) (*)
mm/Inches
(535 x 385 x 390) mm / 21 x 15.1 x 15.3 Inches
Voltage
DC
24 V
Batteries (*)
Ah
N/A
Battery run time
(standard batteries) (*)
Hour
Up to 4 hours
On-Board Charger (*)
Volts/Amps
24V 25A
Productivity (max)
m2/h
2640 m2/h
3040 m2/h
2272 m2/h
Machine weight with empty tanks
(without batteries)
Kg/Lbs.
135 Kg / 298 Lbs.
138 Kg/304 Lbs.
148 Kg/326 Lbs.
Gross Vehicle Weight (GVW)
Kg/Lbs.
347 Kg / 765 Lbs.
350 Kg / 772 Lbs.
360 Kg / 794 Lbs.
Shipping Weight
Kg/Lbs.
202 Kg / 444 Lbs.
205 Kg / 451 Lbs.
215 Kg / 473 Lbs.
Packing dimensions (L xW x H)
mm/Inches
(1620 x 810 x 1200
mm) / (64x 32x 48
Inches)
(1660 x 910 x 1200 mm) /
(66x 36x 48 Inches)
(*): Optional

QUICK START GUIDE
ENGLISH
9
OPERATING GUIDE
WARNING!
On some points of the machine there are some adhesive plates indicating:
－ DANGER!
－ WARNING!
－ CAUTION!
－ CONSULTATION
While reading this Manual, the operator must pay particular attention to the symbols shown on the plates. Do not cover these
plates for any reason and immediately replace them if damaged.
BATTERY CHECK/SETTING ON A NEW MACHINE
WARNING!
The electric components of the machine can be seriously damaged if the batteries are either improperly in-
stalled or connected. The batteries must be installed by qualified personnel only. Set the function electronic
board and the built-in battery charger according to the type of batteries used (WET or GEL/AGM batteries).
Check the batteries for damage before installation. Disconnect the battery connector and the battery charger
plug. Handle the batteries with great care. Install the battery terminal protection caps supplied with the ma-
chine.
Batteries already installed on the machine
1. Ensure that the battery connector (29, Figure. 2) is connected.
2. When first using the machine with new batteries, perform a full charging cycle (see the procedure in Maintenance chapter).
Without batteries
1. Buy appropriate batteries (see “Technical Data” paragraph). For battery choice and installation, apply to qualified battery Retailers.
2. Set the machine according to the type of batteries installed as shown in the Super User key section of the Maintenance chapter.
Figure 4
NOTE
The machine requires two 12V batter-
ies or four 6V Batteries, connected ac-
cording to the diagram (Figure 4).
Put the battery fixed plate correctly
as (Figure. 4).
6V 6V
6V 6V
12V
12V
Battery fixed plate
Back
Front
Back
Front

QUICK START GUIDE
ENGLISH
10
BATTERY INSTALLATION AND BATTERY TYPE SETTING (WET OR GEL/ AGM)
Battery installation
1. Open the recovery tank lid (1, Figure. 1) and check that the recovery tank (16) is empty; otherwise empty it with the drain hose.
(37, Figure. 2)
2. Close the recovery tank lid (1, Figure. 1).
3. Raise the recovery tank (16, Figure. 1) carefully.
4. The machine is supplied with cables suitable to install two 12V batteries or four 6V batteries. Carefully put the batteries into the
compartment, then install them correctly. Put the battery fixed plate correctly as (Figure. 4).
5. Route and install the battery cable as shown in (Figure 4), then carefully tighten the nut on each battery terminal.
6. Place the protection cap on each terminal, then connect the battery connector (29, Figure. 2).
7. Carefully lower the recovery tank (16, Figure. 1).
Battery type setting (WET OR GEL/AMG)
Access to select battery mode
According to the type of batteries (WET or GEL/AGM), set the machine as follows:
1. Press water flow button "+"(A, Figure. 5) and "-" (B, Figure. 5) at the same time.
2. Insert the ignition key (C, Figure. 5) and turn it to "I".
3. Several seconds later enter to the screen of selecting battery mode (Figure. 6)
4. Press water flow button "-"(A, Figure. 5) and "+"(B, Figure. 5) to select battery mode (H, Figure. 6)
5. 3 seconds later show " Update OK" means setting succeeds, turn on to restart. (C, Figure. 5)
Battery charger setting (only for on-board charger if installed)
WARNING!
Do not to set charger unless you have profes-
sional training
1. Turn off the machine and disassemble the On-board charger
(A, Figure.7) from the machine. Then pry open the label on
the charger cover (B, Figure.7) you will find the 2 sets of
dipswitches (SW1 and SW2) in the charger.
2. Only the set of dipswitch SW1(the one on the left side) has
effect on charging curve selection accordingly to the table
below.
Figure 5
1S
A B
C
Figure 6
Value:
Access to select battery mode
Panel Setting
1 Battery Type Cust
H
AGM
Figure 7
ON
SW1
B
A
1
2
SW1SW2

QUICK START GUIDE
ENGLISH
11
DP1
DP2
CHARGING CURVE
ON
OFF
IUIa-ACD for Lead-acid (Wet)batteries
OFF
OFF
IUIa-GEL for Gel batteries of Exide-Sonnenschein
OFF
ON
IUU0-GEL for HAZE Gel and AGM batteries of other manufacturers
ON
ON
IUIUa-AGM for Discover AGM batteries
Battery charging
Fully charge the batteries (see the procedure in Maintenance chapter).
Battery discharge
When the batteries pattern is full (G, Figure 8), the batteries allow the machine to work normally. When the batteries pattern is low (H,
Figure 8), the batteries must be charged. A few seconds after the low battery pattern shows, the brush/pad-holder is automatically turned
off, while the drive system stays on. Drive the machine to the appointed recharging area immediately.
CAUTION!
When the batteries are discharged, charge them as soon as possible, as that condition makes their life shorter.
Check for battery charge at least once a week.
Figure 8
AGM 0000.H
G
AGM 0000.H
H

QUICK START GUIDE
ENGLISH
12
BRUSH/PAD-HOLDER INSTALLATION AND REMOVAL (only for disc machine)
NOTE
Install either the brush (A, Figure 9) or pad-holder (B and C, Figure 9) according to the type of floor to be
cleaned.
CAUTION!
Before installation or removal of brush or pad-holder, make sure all the switches on machine are in off position
and the squeegee is lifted off the floor. The operator must be equipped with suitable personnel protection de-
vices, such as gloves to reduce the risk of accidents.
Proceed as following:
INSTALLATION:
1. Insert the ignition key (42, Figure 3) and turn it to "I". Lift the deck.
Turn off the machine by removing the ignition key(42).
2. Turn the speed adjuster (48) to idle by turning it counter-clockwise.
3. Place the brushes (A, Figure 9) or the pad-holder (B) under the deck.
4. Use the manual method by turning the brush/pad-holder in the
direction opposite to the normal turning direction, and it can be
installed. (as shown in Figure 9)
REMOVAL:
1. Insert the ignition key (42, Figure 3) and turn it to "I”. To remove the
brush/pad-holder lift the deck by pressing the Brush/pad-holder
release button (44), the brush/pad-holder will be automatically
released.
PAD INSTALLATION AND REMOVAL (only for or-
bital machine)
1. Insert the ignition key (42, Figure 3) and turn it to "I". Lift the deck.
Turn off the machine by removing the ignition key.
2. Use the manual method to install or remove the pad as (Figure 10)
Figure 9
Figure 10

QUICK START GUIDE
ENGLISH
13
ADJUSTING THE BALANCE OF SQUEEGEE
1. Install the squeegee and tighten up the nuts (H, Figure 11), then
connect the vacuum hose (G) to the squeegee.
2. Adjust the squeegee by squeegee adjusting handle (A, Figure 11).
a) If there is gap between the ground and middle section of rear
squeegee blade (B), adjust the knob (A) in counterclockwise
direction (F) until all sections of the rear squeegee blade make
good contact with the ground, the front blade touches the ground
slightly.
b) If there is gap between the ground and both end section of rear
blade (C and D), adjust the knob (A) in clockwise direction (E)
until all sections of the rear squeegee blade make good contact
with the ground, the front blade touches the ground slightly.
FILLING SOLUTION TANK
1. Open the water inlet cover (B, Figure 12).
2. Fill with water or solution suitable for work performance through
the water inlet with filter.
The solution temperature must not exceed +104F (+40°C).
3. Do not overfill the tank, refer to water level indicator (H) for the
water volume.
MACHINE START AND STOP
Starting the machine
1. Prepare the machine as shown in the previous paragraph.
2. Insert the ignition key (A, Figure 13) and turn it to "I". Check
Batteries status from display screen. If necessary charge the batteries
(see the procedure in Maintenance chapter).
3. Drive the machine to the working area:
•By pushing either safety switch (F) to move forward or pressing the
safety switch (F) together with the reverse switch (G) to move
backward. The forward speed can be adjusted with the adjuster (H).
4. Lower the squeegee (I) with the Squeegee lifting/lowering handle (J).
5. Lower the brush/pad-holder deck (K) by pressing the one button start (L)
6. Press the solution flow control buttons (O) as necessary, depending on the type of cleaning to be performed.
7. Start cleaning:
•Press either safety switch (F) to activate the machine drive. If necessary, the forward speed can be adjusted with the adjuster (H).
WARNING!
Use only low-foam and non-flammable detergents,
intended for automatic scrubber applications.
Figure 12
D
F
A
GH
Figure 11

QUICK START GUIDE
ENGLISH
14
Figure 14
Stopping the machine
8. Stop the machine by releasing the safety switches (F, Figure 13)
9. The brushes stops. The vacuum system stops after a few seconds.
10. Lift the brush/pad-holder deck (K) by pressing the one button start (L).
11. Lift the squeegee (I) with the Squeegee lifting/lowering handle (J).
12. Turn the ignition key (A) to "0".
13. Make sure that the machine cannot move independently.
MACHINE OPERATION (SCRUBBING AND DRYING)
1. Start the machine as shown in previous paragraphs.
2. While pressing either safety switch (35, Figure 2), maneuver the
machine and start scrubbing/drying the floor.
3. If necessary, stop the machine then adjust squeegee according to
section “Adjusting balance of squeegee”.
ADJUSTING THE LEVEL OF ORBITAL DECK (ONLY
FOR ORBITAL MACHINE)
1. Insert the ignition key (42) and turn it to "I".
Lower the brush/pad-holder deck (25) by pressing the one button start
(49)
2. Adjust the level of orbital deck by adjusting handle (A, Figure 14) so
that the bubble is in the center (B Figure 14).
NOTE
To move the machine forward, press either the left or
right safety switch (F, Figure 13) or both.
Figure 13
I
J
L
1S
A
F
G
F
K
G
C
H
N
M
O
E

QUICK START GUIDE
ENGLISH
15
NOTE
For correct scrubbing/drying of floors at the sides of the walls. It is suggested to go near the walls with
the right side of the machine (A and B, Figure 15) as shown in the figure.
CAUTION!
To avoid any damage to the floor surface, turn off the brushes/pad-holders when the machine stops in one place.
TANK EMPTYING
An automatic float shut-off system (A, Figure 16) blocks the vacuum system when the recovery water tank (B) is full. The vacuum
system deactivation is signaled by a sudden increase in the vacuum system motor noise frequency, also the floor has not dried.
CAUTION!
If the vacuum system turns off accidentally (for
example, when the float is activated because of a
sudden machine movement), to resume the opera-
tion: turn off the vacuum system by pressing the
switch (50, Figure 3), then open the cover (C, Fig-
ure 16) and check that the float inside the grid (A)
has gone down to the water level. Then close the
cover (C) and turn on the vacuum system by
pressing the switch (50, Figure 3).
When the recovery water tank (B, Figure 16) is full, empty it accord-
ing to the following procedure.
Figure 15
Figure 16
B
C
A

QUICK START GUIDE
ENGLISH
16
Recovery water tank emptying
1. Stop the machine.
2. Lift the brush/pad-holder deck (25, Figure 1) by pressing the one-button
start (49, Figure 3) or restart the machine by Ignition key (42, Figure 3).
3. Lift the squeegee (11, Figure 1) with the squeegee lifting/lowering
handle (39, Figure 2).
4. Drive the machine to the appointed disposal area.
5. Empty the recovery water tank with the hose (A, Figure 17). Then, rinse
the tank (B, Figure 16) with clean water.
Solution/clean water tank emptying
1. Empty the solution tank with the outlet cover (A, Figure 18). After
working, rinse the tank with clean water.
AFTER USING THE MACHINE
After working, before leaving the machine:
1. Remove the brushes/pad-holders by pressing the release button (44,
Figure 3) and clean them (only for disc machine).
2. Remove the splash guard as (E, Figure 19) and cleaning it. (only for disc
machine)
3. Remove the Pad and clean it. (only for orbital machine)
4. Empty the tanks (B and C, Figure 18) as shown in the previous
paragraph.
5. Perform the daily maintenance procedures (see the Maintenance
chapter).
6. Store the machine in a clean and dry place, with the brushes/ pad-holders
and the squeegee lifted or removed.
CAUTION!
When draining the wastewater, the vacuum tube for
waste must be folded (A, Figure 17) and lowered to a
lower position (B, Figure 17), and then open the lid of
the vacuum tube for waste to drain the water. Do not
make the outlet of the vacuum tube for waste face up-
ward to drain the water vertically. This is to avoid
wastewater spilling onto the operator.
Figure 18
Figure 17
Figure 19
E
A
C
D
B

QUICK START GUIDE
ENGLISH
17
MACHINE STORAGE DURING LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
1. Perform the procedures shown in After Using the machine paragraph.
2. Disconnect the battery connector (29, Figure 2).
FIRST PERIOD OF USE
After the first 8 hours, check the machine fastening and connecting parts for proper tightening and check the visible parts for wear and
leakage.
MAINTENANCE
WARNING!
Maintenance procedures must be performed after the machine is turned off and the battery charger cable is dis-
connected. In addition, carefully read the safety chapters in the manual.
All scheduled or extraordinary maintenance procedures must be performed by qualified personnel or an authorized Service Center. This
manual only describes the general and common maintenance procedures.
For other maintenance procedures that are not in below maintenance schedule table, please refer to the Service Manual that can be
consulted at any our company Service Center.
SCHEDULED MAINTENANCE TABLE
CAUTION!
The procedure marked with (1) must be performed when the machine is used after 8 hours for the first time. The
procedure marked with (2) must be done by Service Center that qualified by our company.
Procedure
Daily, after each
use
Weekly
semiannually
Yearly
Battery charging
Squeegee cleaning
Brush/Pad-holder cleaning
Tank cleaning
Tank sealing strip inspection
Float ball filter cleaning
Pad cleaning
Splash guard cleaning (only for disc machine)
Squeegee blade check and replacement
Cleaning water filter cleaning
Suction filter cleaning
WET battery fluid level check
Screw and nut tightness inspection
（1）
Lower Isolator (only for orbital machine)
（2）
Brush motor carbon brush check or replacement
（2）
Vacuum motor carbon brush check or replacement
（2）
Drive system motor carbon brush check or replacement
（2）