VIRTUFIT HTR 2.0 User manual

@virtufit_fitness
VirtuFit
www.virtufit.com
ASSEMBLY
VIDEO
USER MANUAL
HTR 2.0 Ergometer Hometrainer
VFHTR-2.0
SERIAL NUMBER
SERIENNUMMER
SERIENUMMER
NUMERO DE SERIE

USER MANUAL
02
STEP 01

ASSEMBLYINSTRUCTION

STEP1
1. Attach the Front Stabilizer (18) to the Main Frame (1) with the Allen Bolts (20) and Arc
Washers (19)
2. Fix the Rear Stabilizer (24) to the Main Frame (1) with the Allen Bolts (25) and Arc Washers
(26) as shown.






STEP2
1.Slip the Protective Guard (13) onto the Handlebar Post (11);
2. Connect the Lower Sensor Wire (14) to the Extension Sensor Wire (12), and then fix the
Handlebar Post (11) on the Main Frame (1), using the Allen Bolts (7), Spring Washers (36),
and Flat Washers (15) as shown. Slip down Protective Guard (13) and fit in the place.

18 19 20
25 24
26
1

USER MANUAL
03
STEP 02

ASSEMBLYINSTRUCTION

STEP1
1. Attach the Front Stabilizer (18) to the Main Frame (1) with the Allen Bolts (20) and Arc
Washers (19)
2. Fix the Rear Stabilizer (24) to the Main Frame (1) with the Allen Bolts (25) and Arc Washers
(26) as shown.






STEP2
1.Slip the Protective Guard (13) onto the Handlebar Post (11);
2. Connect the Lower Sensor Wire (14) to the Extension Sensor Wire (12), and then fix the
Handlebar Post (11) on the Main Frame (1), using the Allen Bolts (7), Spring Washers (36),
and Flat Washers (15) as shown. Slip down Protective Guard (13) and fit in the place.

11
12 13
14
15
7
1
36
36

USER MANUAL
04
STEP 03

STEP3
Attach the Pedals (21L/R) to the Cranks (22L/R)
respectively, viewed from the rider’s exercising
position. Always make sure the Pedals are securely
tightened before any exercise.
Note: Both pedals are labeled L for left and R for right.
To tighten turn the Left pedal counterclockwise and the
Right pedal clockwise.


STEP4
1. Insert the Saddle Post (29) into the Main Frame (1), secured with the Knob (27) at a proper
height as shown.
2. And then fit the Horizontal Saddle Post (34) to the Saddle Post (29), secured with the Flat 
Washer (31) and Knob Nut (30) as shown.
3. Install the Saddle bracket (37) to the Saddle (35) with Flat Washer (38) and Nylon nut (40),
Then attach the Saddle (35) to the Horizontal Saddle Post (34), secured the screw and nut
under the Saddle with wrench.
Note: Make sure the Saddle (35) has been tightly attached to the Horizontal Saddle Post (34)
before exercising.
21
22
21
R
R
L

USER MANUAL
05
STEP 04

STEP3
Attach the Pedals (21L/R) to the Cranks (22L/R)
respectively, viewed from the rider’s exercising
position. Always make sure the Pedals are securely
tightened before any exercise.
Note: Both pedals are labeled L for left and R for right.
To tighten turn the Left pedal counterclockwise and the
Right pedal clockwise.


STEP4
1. Insert the Saddle Post (29) into the Main Frame (1), secured with the Knob (27) at a proper
height as shown.
2. And then fit the Horizontal Saddle Post (34) to the Saddle Post (29), secured with the Flat 
Washer (31) and Knob Nut (30) as shown.
3. Install the Saddle bracket (37) to the Saddle (35) with Flat Washer (38) and Nylon nut (40),
Then attach the Saddle (35) to the Horizontal Saddle Post (34), secured the screw and nut
under the Saddle with wrench.
Note: Make sure the Saddle (35) has been tightly attached to the Horizontal Saddle Post (34)
before exercising.
35
37
38 40
31
30
29
127
34