Vision Fitness T9500 Use and care manual

Date of last revision: 9.05 TREADMILL.CALIB.TM181.TC17305.REV1
STEP 1 EnTEr EnginEEring ModE
• With the SAFETY KEY in place, hold the “ELEVATION UP” and “sPEEd
dOwN” buttons for 5 seconds. The profile window will read “DGA3J”
and the function window will read “NONE”.
• Use the elevation keys until “ENG1” is displayed in the function window.
Press “sELECT”. You are now in ENGINEERING MODE.
STEP 2 SET MiniMuM SPEEd
• Press the “ELEVATION dOwN” button until the function window reads
“P0”. “0” will appear in the elevation window and “39” should appear in
the speed window. To adjust, press “sTART”.
• Press the “sPEEd UP” or “sPEEd dOwN” button until the elevation
window reads “35 - 41”. The running belt should be moving at .5 MPH.
• Press the “sELECT” button to update the data.
STEP 3 SET MaxiMuM SPEEd
• Press the “ELEVATION UP” button until the function window reads “P1”.
“0” will appear in the elevation window and “418” should appear in the
speed window. To adjust, press “sTART”.
• Press the “sPEEd UP” or “sPEEd dOwN” button until the elevation win-
dow reads “415 - 425”. The running belt should be moving at 12 MPH.
• Press the “sELECT” button to update the data.
STEP 4 SET ThE half MaxiMuM SPEEd
• Press the “ELEVATION UP” button until the function window reads “P2”.
“0” will appear in the elevation window and “216” should appear in the
speed window. To adjust, press “sTART”.
• Press the “sPEEd UP” or “sPEEd dOwN” buttons until the console
reads “210 - 220”. The running belt should be moving at 6 MPH.
• Press the “sELECT” button to update the data.
T9500 (TM181) Deluxe (TC17305)
Calibration Guide
CALIBRATION GUIDES
1

CALIBRATION GUIDES
2
STEP 5 SET MiniMuM ElEvaTion
• Press the “ELEVATION UP” button until the function window reads “P4”.
“25 - 30” should appear in the elevation window and “26” should appear
in the speed window. To adjust, press the “sPEEd UP” or “sPEEd
dOwN” buttons until the console reads “25 - 30”. The treadmill should be
level.
• Press the “sELECT” button to update the data.
STEP 6 SET MaxiMuM ElEvaTion
• Press the “ELEVATION UP” button until the function window reads “P5”.
“25 - 30” should appear in the elevation window and “145 - 150” should
appear in the speed window. To adjust, press the “sPEEd UP” or
“sPEEd dOwN” buttons until the window reads “145 - 150”. The treadmill
will be at maximum elevation.
• Press the “sELECT” button to update the data.
rEMovE and rEPlacE ThE SafETy kEy
PrESS ThE STarT buTTon and TEST ThE TrEadMill
ILLUSTRATIONS FOR DISPLAY PURPOSES ONLY
T9500 (TM181) Deluxe (TC17305)
Calibration Guide continued
Address Description Default Value Min.Value MaxValue
P6 Checksum Value
P7 Max Time 99 15 99
P8 Default Weight 150 35 400
P9 Accumulated Time 0 0 6553.5
P10 Accumulated Distance 0 0 65535
P11 Belt Thickness 5 0 10
P12 Roller Diameter 60 60 60
P13 Elevation Direction (reading a/d values) 255 0 255
P14 EXIT (software ver. 5.6 and 5.9) N/A N/A N/A
Date of last revision: 9.05TREADMILL.CALIB.TM181.TC17305.REV1