Visonic NEXT PG2 - User manual

Next®PG2 and Next-K9 PG2 are two-way
wireless digital PIR detectors which are
compatible with PowerMaster®alarm
systems. Based on Visonic’s ground-
breaking PowerG technology, these
detectors combine several eld-proven
advanced technologies which deliver
longer transmission range and battery
life, as well as unmatched advan-tages
for professional installers, central moni-
toring stations and end-users alike.
Next PG2/
Next-K9 PG2
Two-way
Wireless PIR/
Pet-immune
Motion
Detectors
• PowerG®two-way Frequency Hopping
Spread Spectrum FHSS-TDMA technology -
provides robustness and reliability closer
than ever to wired
• 15m (50ft) 90omultiple-curtain coverage
with “wall” creep zone
• Pet tolerant model (Next-K9 PG2)
ignores pets weighing up to 38kg (85lb)
• Large transmission range enabling
repeater-free installations
• Longer battery life (up to 6 years with
typical use)
• Visible signal quality indication shown
on the device
• Enhanced false alarm immunity by
combined Fresnel and cylindrical optics
• Visible and transmitted low battery
indication
• Compatible with PowerMaster systems
and PowerG receivers
Specications:
Battery type: 3V, CR-123A
Lithium battery
Weight
(including battery):
70g (2.5oz)
Operating
temperature:
-10°C to 50°C
(14°F to 122°F)
Operating
environment:
Indoor
Dimensions: 94.5 x 63.5 x 53mm
(3.7 x 2.5 x 2.06in)
, Next, PowerG and PowerMaster are registered trademarks of Visonic Ltd. Other names are the
property of their owners. Visonic reserves the right to change information or specications without notice.