P/11 P/12
Keep in mind that these are general recommendations. Actual time may differ
from the recommended values, depending on the freshness and the specific
type of product, as well as your preferences.
8. Press the START button to begin the cooking process, the display will show
the countdown.
9. At the end of the cooking process you will hear a beep and the Multi Cooker
will automatically switch to Keep warm maintain the temperature of prepared
dishes: steaming light goes out, starts flashing keep warm mode: Steam
Function LED goes out and Keep Warm LED will keep flashing. Despite the
fact that the regime is willing to maintain the temperature of food for 8 hours or
more, do not leave food in this mode for a long time, it can lead to drying of the
product.
10. Disconnect the unit from the mains.
PROGRAM "YOGURT"
1. Arrange necessary ingredients for yogurt (100 ml natural yogurt for 1 liter of
milk) in small glass jars. In the bowl pour a small amount of water and the
ingredients to be put into the water.
2. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element.
3. Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
4. Connect the device to the mains.
5. Press “Select Program” button and choose the Yogurt Function. Automatic
cooking time: 8 Hours. You can change it by adjusting the cooking time.
6. Press the START button to begin the process of heating, the display will flash
the characters: ----
Warm-up time is set by the microprocessor, the process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
7. When finished the heating, you will hear a beep and the Multi-Cooker will
automatically switch to Keep Warm mode; YOGURT LED goes out, and the
Keep Warm starts flashing.
Click on the keep warm / CANCEL to turn off the heater and open the lid.
Cover the cups with yogurt lids and store in the fridge to cool.
WARNING: It is not recommended to leave the finished yogurt is in the mode
of heat for a long time. The long process of fermentation contributes to the
emergence of more pronounced sour taste of yogurt.
8. Disconnect the unit from the mains.
PROGRAM "BAKE"
1. Prepare the dough for as recommended by your chosen recipe.
2. Grease the bowl with butter or margarine so that the baked product is easier to
take out of the bowl. Put the dough in a bowl and line it.
3. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4. Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
5. Connect the device to the mains.
6. Press “Select Program” button and choose the Bake Function. Automatic
cooking time: 20 Mins. You can change it by adjusting the cooking time.
7. Press the START button to begin the process of heating, the display will flash
the characters: ----Warm-up time is set by the microprocessor, the process will
end automatically, but you can stop it by pressing keep warm / CANCEL.
8. When finished the heating, you will hear a beep and the Multi-Cooker
automatically switches to Keep Warm: BAKE indicator goes out, and Keep
Warm starts flashing. Click on the keep warm / CANCEL to turn off the heater
and open the lid. Despite the fact that the regime is willing to maintain the
temperature of food for 8 hours or more, do not leave food in this mode for a
long time, it can lead to drying of the product.
9. Disconnect the unit from the mains.
10. After 2-3 minutes, remove the bowl from the housing. Then turn it upside down
on a tray or a grid.
Please put oven gloves or use oven gloves to remove the bowl. If the cake is
left in the bowl for a long time, baking can dampen. After baking in the bowl
may be left greasy stains - is permissible. Clean the bowl in accordance with
the section "Cleaning and care".
PROGRAM "ROAST"
1. Put the necessary ingredients and spices in a bowl, cover with water. Make
sure that all the ingredients (including liquid) were below the MAX, is located
inside the bowl.
2. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
3. Close the cover until it clicks. If the lid is not closed properly, the program will
www.vitesse.ru
