2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 3
WARNING!
A (x1)
Desktop
STEP 1
Carefully remove the desktop (A) from the
packaging and cut ties from desktop with
scissors.
33lbs
14.97kg
STEP 4
Squeeze the handles on both sides and li the desktop (A). Hang keyboard tray over pre-installed
screws, and tighten screws using the allen wrench (E).
Attach cable clip (F) where desired.
B (x2)
Keyboard Bracket
STEP 5
Manage cables using cable ties (G).
STEP 2
G (x2)
Cable Tie
C (x1)
Keyboard Tray
D (x6)
Screw
E (x1)
Allen Wrench
F (x1)
Cable Clip
Secure brackets (B) to keyboard tray (C)
using the six screws (D).
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
C
D
B
E
F
G
