2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 3
STEP 4
Place monitor, keyboard, and other items on
the desktop surface.
WARNING!
A (x1)
Adjustable
Desktop
B(x2)
Cable Tie
STEP 1
Carefully remove the desktop (A) from
packaging and place on a at surface. Attach
foot pads (C) to the underside of frame.
STEP 2
Remove the strap from desktop (A) and the
packing material.
STEP 5
C(x6)
Foot Pad
Manage cables using cable ties (B).
Squeeze the handle on the right side, then raise or lower desktop to desired height.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33 lbs
(14.97kg)
From the back side of the desk, rotate
caps counterclockwise to the le to
open the threading hole
Remove
Through the
power line
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
B
