Vivo BEE-HV04C User manual

Double Deep + Single Medium Beehive
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/bee-hv04c
SKU: BEE-HV04C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A(x4)
Deep Side
Panel
B(x4)
Deep End
Panel
C(x2)
Medium Side
Panel
E(x30)
Frame Top Bars
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS
KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
D(x2)
Medium End
Panel
F(x30)
Frame Bottom
Bars
G(x40)
Deep Frame
Side Bars
H(x20)
Medium Frame
Side Bars
I(x20)
Deep
Foundation
J(x10)
Medium
Foundation
K(x1)
Bottom Board
L(x1)
Inner Cover
M(x1)
Telescoping Cover
N(x4)
Telescoping Cover
Cutout
O(x1)
Plastic Queen
Excluder
P(x1)
Entrance Reducer
S-A (x60)
Brass Hive Body Nails
S-B (x125)
Silver Foundation Nails
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

3
STEP 1
ASSEMBLY STEPS
TOOLS NEEDED
Hammer Wood Glue
Connect dovetails from Deep Side Panels (A) into Deep End Panels (B). Repeat this
process for Medium Side Panels (C) and and Medium End Panels (D). Insert Brass
Hive Body Nails (S-A) into predrilled holes and hammer into place.
A
A
B
BS-A
C
C
D
D
S-A

4
STEP 2
Put a small drop of wood glue on either end of Frame Top Bars (E) and Frame
Bottom Bars (F). Insert Frame Bottom Bars (F) into Deep Frame Side Bars (G).
Place Deep Foundations (I) into Frame Bottom Bars (F) and insert Frame Top
Bars (E) into into Deep Frame Side Bars (G). Reapeat the process for the medium
frames using Medium Frame Side Bars (H) and Medium Foundations (J).
F
E
G
I
E
F

5
STEP 3
Hammer Silver Foundation Nails (S-B) into ends of Frame Top Bars (E) and Frame
Bottom Bars (F) on both deep and medium frames.
S-B
E
F

6
STEP 5
Stack the hive assembly on top of Bottom Board (K) in the appropriate
conguration for your bees.
STEP 4
Insert the assembled frames into the corresponding boxes.
K

7
STEP 6
Place Inner Cover (L) and Telescoping Cover (M) onto the hive assembly.
Telescoping Cover (M) comes with optional Telescoping Cover Cutouts (N) that
can be inserted into the holes to manage ventilation.
L
M
M
N

LAST UPDATED: 11/19/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303