Vivo DESK-TOP60W User manual

White 60" x 24" Table Top
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-top60b
SKU: DESK-TOP60W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1
WARNING!
A (x1)
Desktop
Mount the desktop to the desk frame using screws. If necessary, drill pilot holes for the
screws to match your desk frame. If using a VIVO desk frame, make sure to orientate the
desktop so the control panel or crank handle pilot holes are facing the front.
Please note that mounting screws are not included with this desktop. Use the mounting
hardware included with your standing desk frame to mount the desktop.
Phillips
Screwdriver
TOOLS NEEDED
Drill
This desktop is pre-drilled to
match the mounting holes in
most VIVO electric desk frames
with two legs. Some frames
will not fit these holes. In this
case, you will need to drill your
own to match your frame.

3
STEP 3
If installed to an electric height adjustable desk frame, the desk may now be plugged into a power
outlet.
STEP 4
Use a bubble level to make sure the desktop is level. If necessary, adjust the foot pads on the standing
desk frame to level the desktop.
bubble level
STEP 2
For VIVO frames, pre-drilled holes have been included for most control panels and crank handles.
Note that holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.
Bottom Side
Pre-drilled holes for panels and cranks

LAST UPDATED: 04/20/2022
REV4
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303