Vivo DESK-SHELF22B User manual

22” Versatile
Desktop Shelf Riser
Instruction Manual
SKU: DESK-SHELF22B
Assembly Video & Product Info
www.vivo-us.com/products/desk-shelf15b

2 3
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation, please
contact our product support team at 309-278-5303 or [email protected] for further assistance. Check carefully to
make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not
use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
LBS
CAUTION!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
Package Contents
We’re Here for You Included Hardware & Tools
Tools Needed:
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
Weight Capacity:
44lbs
(20kg)
A (x1)
Shelf
B (x2)
L Bracket
D (x2)
Clamp Screw
C (x2)
Short Bracket
E (x2)
Clamp Brace
F (x2)
Clamp Plate
G (x2)
Clamp Pad
H (x4)
Foot Pad
S-A (x2)
M4 Washer
S-C (x8)
M6x20mm Screw
S-B (x4)
M6x25mm Screw
S-D (x2)
M3x8mm Screw
S-E (x4)
M6 Washer T-A (x1)
4mm Allen Wrench

4 5
Inward Facing | pg 6-9
Shelf clamps to desktop
and sits above the clamps
Outward Facing | pg 10-13
Shelf clamps to desktop and
extends away from clamps
Freestanding | pg 14-15
Shelf sits on desktop; no clamps
ASSEMBLY OPTIONS:
DESKTOP
DESKTOP
DESKTOP
Desk Shelf Riser can be assembled in one of three ways. Choose an option below and follow the
provided instructions for assembly.

6 7
Inwardfacing Assembly
-- Option 1 --
STEP 1
S-B (x4)
S-E (x4)
Secure L Brackets (B) to Shelf (A) using M6x25mm Screws (S-B), M6 Washers (S-E), and 4mm Allen
Wrench (T-A).
Insert Clamp Screw (D) through Short Bracket (C), then connect Clamp Plate (F) using
M4 Washers (S-A), M3x8mm Screws (S-D), and a Phillips Screwdriver. Remove adhesive backing
from Clamp Pad (G) and apply to Clamp Plate (F).
STEP 2
S-D
B
E
x2
S-A
G
F
C
D
STEP 3
Clamp Braces (E) can be attached in various positions on L Brackets (B) depending on your desktop
thickness and desired shelf height. Reference the table below to determine which installation holes to
use for your desired shelf height.
1
3
4
5
2
SH
DT
T-A
S-A (x2)
S-D (x2)
A
S-B
T-A
S-E
B
Hole Position Desktop Thickness
Range (DT)
Shelf Height
from Desktop (SH)
10.80”-2.79”
(21mm-71mm) 2.5” (65mm)
20.40”-1.96”
(10mm-50mm) 3.4” (86mm)
30.40”-1.10”
(10mm-29mm) 4.2” (107mm)
4N/A N/A
5N/A N/A

8 9
STEP 4
Assembly Complete!
Slide shelf assembly onto desk surface. Tighten Clamp Screw (D) to secure.
D
Using the installation holes determiend above, attach Short Brackets (C) and Clamp Braces (E) to
L Brackets (B) using M6x20mm Screws (S-C) and 4mm Allen Wrench (T-A).
STEP 3b
S-C (x8)
T-A
D
S-C
T-A
E
B
C

10 11
Insert Clamp Screw (D) through Short Bracket (C), then connect Clamp Plate (F) using M4 Washers
(S-A), M3x8mm Screws (S-D), and a Phillips Screwdriver. Remove adhesive backing from Clamp Pad (G)
and apply to Clamp Plate (F).
Outward Facing Assembly
-- Option 2 --
STEP 1
Secure L Brackets (B) to Shelf (A) using M6x25mm Screws (S-B), M6 Washers (S-E), and 4mm Allen
Wrench (T-A).
STEP 2
Clamp Braces (E) can be attached in various positions on L Brackets (B) depending on your desktop
thickness and desired shelf height. Reference the table below to determine which installation holes to
use for your desired shelf height.
1
3
4
5
2
SH
DT
STEP 3
Hole Position Desktop Thickness
Range (DT)
Shelf Height
from Desktop (SH)
10.80”-2.79”
(21mm-71mm) 2.5” (65mm)
20.40”-1.96”
(10mm-50mm) 3.4” (86mm)
30.40”-1.10”
(10mm-29mm) 4.2” (107mm)
4N/A N/A
5N/A N/A
S-B (x4)
S-E (x4)
T-A
S-D
x2
S-A
G
F
C
D
S-A (x2)
S-D (x2)
A
T-A
S-B
S-E
B

12 13
STEP 4
Slide shelf assembly onto desk surface. Tighten Clamp Screw (D) to secure.
Using the installation holes determiend above, attach Short Brackets (C) and Clamp Braces (E) to
L Brackets (B) using M6x20mm Screws (S-C) and 4mm Allen Wrench (T-A).
STEP 3b Assembly Complete!
S-C (x8)
T-A
D
S-C
T-A
E
C
B

14 15
Freestanding Assembly
-- Option 3 --
STEP 1
STEP 2
Secure Short Brackets (C) to Shelf (A) using M6x25mm Screws (S-B), M6 Washers (S-E), and 4mm Allen
Wrench (T-A).
Apply Foot Pads (H) to the long underside of L Brackets (B).
STEP 3
Secure L Brackets (B) to Short Brackets (C) using M6x20mm Screws (S-C) and 4mm Allen Wrench (T-A).
Assembly Complete!
S-B (x4)
S-E (x4)
T-A
S-C
T-A
S-C (x8)
T-A
A
S-B
S-E
C
H
B
BC

LAST UPDATED: 10/16/23
REV2
v2.0
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
Monday-Friday from 7:00am-7:00pm CST
Need Help? Get In Touch
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
VIVO-us @vivo_us