Vivo DESK-V100MW User manual

Crank 55” x 24” Height Adjustable Desk - White
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v100mw
SKU: DESK-V100MW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x1)
Desktop
TOOLS NEEDED
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
88lbs
39.92kg
B (x1)
Sync Rod
D (x1)
Crossbar
E (x1)
Crank
S-A (x4)
M8x10 Hex
Head Screw
S-C (x1)
Allen Wrench
C (x2)
Liing Column
S-B (x6)
M6x30 Philips
Head Screw
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
STEP 2
Insert the sync rod (B) into the hex socket on the liing column. Place the second column (C) onto the
desk board and insert the other end of the sync rod into the column.
ASSEMBLY STEPS
STEP 1
Place desk board (A) upside down on a flat surface. Assemble one liing column (C) to the desk board
using x3 Phillips head screws (S-B) and tighten with a screwdriver.
C
S-B
A
B
C

4
STEP 3
Secure the second liing column to the desk board using x3 Phillips head screws (S-B) and tighten
with a screwdriver.
S-B
Phillips
Screwdriver
S-B

5
STEP 4
Assemble the crossbar (D) to the back of the liing columns using hex head screws (S-A) and tighten
with the Allen wrench (S-C).
D
S-A
S-C

6
3
STEP 5
Insert the crank (E) into the hex socket of the liing column.
E
Figure 1: Turn the crank to raise or lower
the desk.
Figure 2: Store the crank in the front of the desk
support bracket on the column as shown.
Figure 3: Turn the foot pads to adjust the desk
level.
Figure 4: Use a bubble level to ensure the desk is
sitting perfectly level.
E

7
3
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.

LAST UPDATED: 02/02/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303