Vivo DESK-M051CB User manual

Black Compact Crank Height Adjustable Desk Frame
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/desk-m051cb
Instruction Manual
SKU: DESK-M051CB
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

2
Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

3
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualied
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/desk-m051cb
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP
PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART
OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK
OF TIPOVER.
TIPOVER WARNING
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
154lbs
(70kg)
!

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Telescopic
Crossbar
B(x1)
Leg
C(x1)
Leg with
Gearbox
H(x1)
Crank Handle
Collar
D (x2)
Side Bracket
E (x2)
Foot
F (x1)
Sync Rod
G (x1)
Crank
Handle
S-A (x4)
M6x25mm
Screw
S-B (x4)
M6x10mm
Screw
S-D (x10)
ST4.2x16mm
Screw
S-C (x3)
M6x35mm
Screw
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
S-E (x1)
M4x8mm Screw
T-A (x1)
4mm Allen
Wrench
T-C (x1)
Wrench
T-B (x1)
5mm Allen
Wrench

5
STEP 1: Adjust Telescopic Crossbar
STEP 2: Attach Legs
Loosen the screws on Telescopic Crossbar (A) using 4mm Allen
Wrench (T-A) and extend the sides.
Attach Telescopic Crossbar (A) to Leg (B) and Leg with Gearbox (C) using M6x25mm Screws
(S-A).Tighten with 4mm Allen Wrench (T-A).
Have a question? Give us a quick call / chat!
309-278-5303 or vivo-us.com
ASSEMBLY STEPS
A
T-A
A
Telescopic
Crossbar
T-A
4mm Allen Wrench
A
B
C
S-A
T-A
B
Leg
C
Leg with Gearbox
S-A
M6x25mm Screw
T-A
4mm Allen Wrench

6
STEP 3: Assemble Side Brackets
Assemble Side Brackets (D) to the frame assembly using M6x10mm Screws (S-B) and 5mm
Allen Wrench (T-B).
D
S-B T- B
D
Side Bracket
S-B
M6x10mm Screw
T-B
5mm Allen Wrench

7
STEP 4: Install Feet
Mount Feet (E) to Leg (B) and Leg with Gearbox (C) using M6x35mm Screws (S-C) and 4mm Allen
Wrench (T-A).
Have a question? Give us a quick call / chat!
309-278-5303 or vivo-us.com
E
S-C
T-A
B
C
E
Foot
S-C
M6x35mm Screw
T-A
4mm Allen Wrench

8
STEP 5: Align Desktop
Extend Telescopic Crossbar (A) to t the desktop. Be sure to leave 4”-5” (100mm-130mm) of
space from the edge of the desktop on either side of the frame. Retighten the screws on Telscopic
Crossbar (A) using 4mm Allen Wrench (T-A).
(100-130mm)
A
T-A
4”-5” (100-130mm)
4”-5”
T-A
4mm Allen Wrench

9
STEP 6: Secure Desktop
Secure the frame assembly to the desktop using ST4.2x16mm Screws (S-D) and a Phillips
screwdriver.
Have a question? Give us a quick call / chat!
309-278-5303 or vivo-us.com
S-D
S-D
ST4.2x16mm Screw

10
STEP 7: Install Sync Rod
Loosen the knob on Sync Rod (F) and insert the rod into Leg (B). Extend Sync Rod (F) onto Leg
With Gearbox (C). Tighten both knobs on Sync Rod (F) using Wrench (T-C).
F
Sync Rod
T-C
Wrench
12
4
3
T-C