Vivo DESK-V111VT User manual

Black Electric Mobile Compact Desk
Instruction Manual
SKU: DESK-V111VT
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v111vt
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
PACKAGE CONTENTS
WARNING!
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
1 (x1)
Desktop
2(x1)
Desk Support
Bracket
3(x1)
Desk Support
Bracket
A (x4)
Caster
B x18)
M5x14
C(x6)
M5x12 Flat
Head Screw
4 (x1)
Support Frame
5 (x1)
Control Panel
6 (x1)
Leg
8(x1)
Keyboard
Tray
9(x2)
Keyboard
Brackets
10 (x1)
Control Unit
7(x2)
Support
Bracket
D (x2)
M4x12
E x12)
M6x12
F(x1)
4mm Allen
Wrench
11 (x1)
Base
12 (x1)
Plastic Sleeve
13 (x1)
Power Cable
G(x2)
Cable Clip
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: Some extra screws are included.

3
Phillips
Screwdriver
TOOLS NEEDED
88 lbs
(39.92kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Screw the casters (A) into the underside of the base (11).
STEP 2
Install the plastic sleeve (12) to the top of the base, then
install the leg (6) to the base using x4 M6x12 bolts (E).
Tighten bolts with the Allen wrench (F).

4
STEP 3
Install the desktop (1) to the top of the frame using x6 M5x14
screws (B), and tighten with a Phillips screwdriver.
STEP 5
Place the support frame (4) on top of the leg
with the slots facing down and long end forward,
making sure the pre-installed bolts on the leg
insert into the slots. Tighten bolts with the Allen
wrench.
STEP 4
Install the desk support brackets (2, 3) to the front
and back of the support frame using x6 M6x12
bolts (E), and tighten with the Allen wrench.

5
STEP 6
Mount support brackets (7) to the bottom of the desktop using x8 M5x14 screws (B), and tighten with
a Phillips screwdriver.
STEP 7
Mount the control panel (5) to the front of the desktop using x2 M4x12 bolts (D).

6
Step 8
Step 9
Install the control unit (10) to the bottom of the desktop using
x2 M5x14 screws (B), and tighten with a Phillips screwdriver.
Connect the motor and control panel cables to the control unit.
(NOTE: Make sure the connections for the motor and control
panel are facing towards the center of the desk).
Step 10
Plug the power cable (13) into an AC wall outlet, then
use the control panel to adjust the height.
Secure keyboard brackets (9) to keyboard tray (8) by
using x6 M5x12 flat head screws (C).
NOTE: It may be necessary
to plug the motor cable into
the control unit (10) before
installing the control unit.
6
5
13
13
6
5
C

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.

LAST UPDATED: 08/21/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303