Vivo DESK-E1L94B User manual

Black 47" x 47" Corner Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e1l94b
SKU: DESK-E1L94B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
WARNING!
PACKAGE CONTENTS
S-A (x33)
M5x16 Screw
S-B x6)
M6x12 Screw
S-C (x10)
M8x16 Screw
S-D (x10)
M6x35 Screw
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: Extras of each screw size have been included
T-A (x1)
5mm Allen Wrench
I (x4)
Foot Pad
S-G x12)
Anti-Vibration
Pad
S-H (x2)
Cable Clip
C(x1)
Le Support
Bar
D (x1)
Right Support
Bar
G x1)
Leg
F(x1)
Leg With Motor
K(x1)
Sync Rod
H(x2)
Foot
L (x1)
Cable Tray
B (x4)
Connector
Plate
E (x1)
Support Bar
Connector
M (x1)
AC Adapter
A(x3)
Desktop
Panel Set
J (x2)
Foot Extension
T-B (x1)
2mm Allen Wrench
S-E (x2)
M8x12 Screw
S-F (x2)
Washers

3
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
TOOLS
NEEDED
Phillips
Screwdriver
Place Desktop Panel Set(A) upside down on a flat surface, then assemble using Connector Plates (B)
with M5x16 Screws (S-A) and a Phillips screwdriver.
S-A
B
Drill
STEP 2
Assemble Le Support Bar (C) and Right Support Bar (D) using Support Bar Connector (E) and
M6x12 Screws (S-B). Tighten with 5mm Allen Wrench (T-A).
C
D
S-B
T-A
E
A

4
STEP 3
STEP 4
Insert Anti-Vibration Pads (S-G) into the desktop mounting holes in the support bar assembly.
Place the support bar assembly upside down on Desktop Panel Set (A), and secure these using M5x16
Screws (S-A) with a Phillips screwdriver.
S-G
A
S-A

5
STEP 5
Mount Leg With Motor (F) and Leg (G) to the support bar assembly using M8x16 Screws (S-C) and
tighten with 5mm Allen Wrench (T-A).
S-C
T-A
F
G
STEP 6
Install Feet (H) on the legs as shown using M6x35 Screws (S-D) and 5mm Allen Wrench (T-A). Screw
Foot Pads (I) into Feet (H). For added stability, Feet Extensions (J) can be added to the back of Feet (H)
with M8x12 Screws (S-E) and Washers (S-F). Tighten using 5mm Allen Wrench (T-A).
Two installation methods for feet
OR
F
J
G
G
G
I
12
7
7
T-A
J I
H
S-E
S-F
I
I
H
H
S-D
I
T-A

6
STEP 7
STEP 8
Mount Cable Tray (L) to the desktop assembly using M5x16 Screws (S-A) and a Phillips screwdriver.
Mount the control panel located on Leg With Motor (F) using M5x16 Screws (S-A) and a Phillips
screwdriver. Connect the AC Adapter (M) and motor to the control panel, then organize cables using
the Cable Clips (S-H).
Insert Sync Rod (K) into Leg (G). Loosen the nut on Sync Rod (K), then extend the rod onto Leg With
Motor (F) and tighten the nut. Tighten the set screw on the end of Sync Rod (K) using the 2mm Allen
Wrench (T-B).
K
F
G
T-B
8
A
E
A
S-A
L
F
S-A
S-H
M

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
Carefully turn the desk right side up and connect the AC Adapter (M) to a wall outlet. If necessary, adjust
foot pads (I) to level the desk.
The desk is now ready for use. Please refer to the Controller User Guide for operating instructions.
I
STEP 9
M

LAST UPDATED: 06/24/2021
REV3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303