Vivo MOUNT-KB05HA User manual

Light Wood / White Clamp-on Height Adjustable
Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05ha
SKU: MOUNT-KB05HA
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
A(x1)
Keyboard Tray
B(x2)
Slider Bracket
D(x2)
Support Bracket
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
STEP 1
Assemble slider brackets (B) to the support brackets (D) using M4x7 screws (F). Tighten with a Phillips
screwdriver.
NOTE: Clamp can be oset using the extra holes in slider brackets (B) to allow the tray to be pulled out
an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.
C(x2)
Clamp
E(x2)
Pad
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
F(x6)
M4x7
G(x8)
M5x12
H(x6)
M5x8
B
D
F
F

3
STEP 2
Assemble slider brackets (B) with support brackets (D) to the keyboard tray (A)
using M5x12 screws (G), and tighten with a Phillips screwdriver. The support
brackets (D) must be on the opposite end from the center cable guide.
STEP 3
Assemble clamps (C) to support brackets (D) at desired height using M5x8 screws (H). Tighten with a
Phillips screwdriver.
STEP 4
Place pads (E) on the underside of each clamp. Place assembled keyboard mount on edge of desk and
tighten clamps. NOTE: To ensure keyboard tray is level, do not over-tighten clamps. Slide keyboard
tray forward/back to desired position.
A
G
H
C
Desktop

LAST UPDATED: 07/26/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303