Vivo STAND-V038M User manual

Dual Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v038m
SKU: STAND-V038M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
Phillips
Screwdriver
A (x1)
Arm
B(x1)
Pole
C(x1)
Pole Cover
D(x1)
Clamp
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
E(x2)
VESA Bracket
F(x1)
Grommet Base
Plate
G (x6)
Arm Cable
Clip
H (x1)
Cable Clip
I (x4)
Bushing
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
J(x2)
M8x60
K(x4)
D8 Washer
M-A (x8)
M4X12
M-B (x8)
M5x12
M-C (X8)
D5 Washer
R (x1)
5mm Allen
Wrench
Q(x1)
4mm Allen
Wrench
22lbs
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
L (x2)
M8 Nut
M (x3)
M6x16
N (x5)
So Pad
O(x1)
Support Plate
P(x1)
Wrench
S (x1)
6mm Allen
Wrench
TOOLS NEEDED

3
ASSEMBLY STEPS
STEP 2
OPTION A: Clamp Installation
Stick so pads (N) to the
underside of the clamp (D).
Attach pole (B) to clamp (D) using
M6x16 bolts (M). Tighten using
the 4mm Allen wrench (Q). Attach
the clamp (D) to desktop .
OPTION B: Grommet Base Installation
For grommet hole mounting,
disassemble the clamp (D) using the
4mm Allen wrench (Q). Remove the
screw and plate from the clamp bolt,
then remove the clamp bolt. Stick so
pads (N) to the bottom of the grommet
base (F). Slide the support plate (O) onto
the clamp bolt and insert bolt through
the grommet hole and grommet base
(F), then thread into the pole (B).
STEP 1
Insert pole cap (C) to top of pole (B).

4
STEP 3
Place bushings (I) into holes at the ends of the arms (A). Install VESA brackets (E) onto the arms with
M8x60 bolts (J) and D8 washers (K). Secure with D8 washers (J) and M8 nuts (L), and tighten with the
5mm Allen wrench (R) and wrench (P). Do not overtighten.
STEP 3
Slide the cable clip (H) and arm (A) over the top of the pole and tighten using the 5mm Allen
wrench (R).

5
STEP 5
Attach arm cable clips (G) to the arms (A) as shown.
STEP 6
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes
in the monitors, making sure to leave 3mm of threads exposed. Align bolts
(M-A or M-B) in monitors over slots in the VESA plates.

6
STEP 6 (Continued)
Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes of each monitor.
Tighten all four bolts using a Phillips screwdriver.
STEP 7
Adjust tilt support using the 6mm Allen wrench (S).

7
STEP 8
Store Allen wrenches in the cable management clip (H) for future use.
STEP 9
Adjust height of side monitors by turning the bolt on top of each bracket with the 5mm Allen wrench
(R) as shown.

LAST UPDATED: 09/10/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303