Vivo STAND-V101O User manual

Pneumatic Arm Single Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v101o
SKU: STAND-V101O
[email protected]om www.vivo-us.com 309-278-5303

2 3
ASSEMBLY STEPS
STEP 1
OPTION A: Desk Clamp Installation
Assemble base (B) to clamp (C) using
M6x8 bolts (F), and tighten with 5mm
Allen key (H). Unscrew the large
clamp bolt to the “open” position.
For 3/8” - 2” (10mm - 50mm) desk
thickness, place clamp disk (E) onto
the top of the clamp bolt. Place
assembled base onto edge of desk
and tighten using the 5mm Allen key.
For 1-1/2” - 3-1/8” (40mm - 80mm)
desk thickness, remove the two bolts
from the back of the clamp using
5mm Allen key, and then reassemble
clamp to the lower position. Place
clamp disk (E) onto the top of the
clamp bolt. Place assembled base
onto edge of desk and tighten using
the 5mm Allen key.
PACKAGE CONTENTS
TOOLS NEEDED
4.4-14.3lbs
(2-6.49kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Arm
B(x1)
Base
C(x1)
Clamp
M-A (x4)
M4x12
M-B (x4)
M5x12
M-C (x4)
D5 Washer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D(x1)
Support Plate
E(x1)
Clamp Disk
F (x2)
M6x8 Bolt
G(x1)
3mm Allen Key
H (x1)
5mm Allen Key
OPTION B: Grommet Base Installation
Remove large clamp bolt from clamp (C).
If necessary, drill hole in desk using a 3/8”
(10mm) drill bit. Secure base (B) to desk
using clamp bolt with support plate (D), and
tighten using 5mm Allen key (H). NOTE:
Grommet option will fit a desk thickness of
3/8” - 1-3/4” (10mm - 45mm).
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE MAY NOT BE USED
Do not overtighten screw!
Do not overtighten screw!

4 5
STEP 2
While holding arm (A) in the closed position, cut the shipping tie.
STEP 4
STEP 5
STEP 3
Place the arm (A) onto the base (B). Tighten the screw on the back of the arm using the
3mm Allen key (G) or a flat blade screwdriver.
Attach two bolts (M-A or M-B) and washers (M-C) to top
mounting holes of monitor, making sure to leave 1/8”
(3mm) of threads exposed.
Align bolts installed to monitor with VESA plate. Secure using two more bolts
(M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four
bolts using the 5mm Allen key (H) or a Phillips screwdriver.
1. Firmly hold the two halves of the spring arm together and
have another person cut o the cable tie from around the
spring arm.
2. Slowly release the pressure on the spring ar and allow it
to gradually stretch to it’s full extension.

6 7
STEP 6 STEP 7
Use cable clips on arm (A) to organize cables.
Adjust gas spring tension in arm (A) and monitor bracket tilt support using 5mm Allen key
(H). Turn gas spring tension adjustment screw counter-clockwise to increase support, and
clockwise to decrease support.

LAST UPDATED: 10/31/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M