Vivo STAND-TV09 User manual

Silver Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv09
SKU: STAND-TV09
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Middle Base
B(x1)
Le Leg
C(x1)
Right Leg
I (x2)
Adapter
Bracket
J x1)
Column
K(x1)
Plastic
Handle
L (x1)
Top Cover
H(x2)
Plastic
Cover
E (x1)
Right Cover
F (x1)
Support
Plate
G (x1)
Universal
Plate
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOMEHARDWARE INCLUDED MAY NOT BE USED
N (x1)
Camera
Shelf
M(x1)
Connecting
Plate
M-F (x4)
Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-C (x4)
M6x30
D (x1)
Le Cover
M-H (x8)
Large Spacer
O (x1)
DVD Shelf
P x4)
Washer
Q (x8)
M6x16
R (x3)
M6x25
T (x4)
M4x6
S(x3)
M4x6
U (x2)
M6x14
V x6)
M6x8
W (x4)
M8x25
X (x2)
M5x8
Z (x1)
Wrench
Y(x1)
Allen
Wrench
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Insert the base (A) into the le leg (B). Align the mounting holes and secure with M6x16 bolts (Q).
Repeat this step for the right leg (C). Adjust caster height if needed by loosening the nut with the
wrench (Z).
STEP 2
Loosen screws on each side of column (J) using the Allen wrench (Y) to adjust height to desired level,
then tighten (CAUTION: Hold inner column when loosening for adjustment). Attach column to base (A)
using M8x25 bolts (W) and tighten with Allen wrench. Slide the handle (K) and the top cover (L) over the
pole.
Q
Y
Z
YY
K
W
Y
R
E
D
11lbs
(5kg)
TV DVD CAMERA
11lbs
(5kg)

4
STEP 3
Attach the support plate (F) to the column (J) with M6x14 bolts (U). Tighten bolts using a screwdriver.
Place le and right covers (D) and (E) over the base of the stand.
STEP 4
Insert the washers (P) into
the back of universal plate (G)
along the plate rails. Insert
the adapter brackets into the
universal plate (G). Align the
holes in the adapter brackets
(I) to the holes in the washers
(P). Insert the four bolts, but
do not tighten them yet. Slide
the adapter brackets (I) onto
the universal plate (G). Align
the holes in the brackets with
the washers (P). Insert four
M6x16 bolts (Q), but do not
tighten. Attach the plastic
covers (H) to both ends of the
universal plate (G) using M6x8
bolts (V).
OPTION A: Flat Back Screen
Align the adapter brackets (I) with the mounting holes in your display, then screw bolts in with Philips
screwdriver.
U
L
F
TV
TV
TV
M-A/M- B
M-F

5
STEP 5
Hang the universal plate (G) onto the support plate (F), and secure with M5x8 bolts (X).IMPORTANT:
Make sure the display is mounted correctly and that the bolts are tightened safely before releasing the
display.
STEP 4 (Continued)
OPTION B: Curved Back Screen
Choose the appropriate
bolts, washers and spacers (if
necessary) according to the
type of screen. Tighten all bolts
but do not over tighten. Screw
the adapter brackets onto the
display.
STEP 6
Insert the two plastic holders of the DVD shelf (O) into the slots of the column, then close the levers to
lock the DVD shelf in place. Tighten M4x6 dome head bolts (T) into the bottom of the shelf brackets to
secure.
X
plasti c holder
leve r
T

6
STEP 7
STEP 8
Run cables through cable management slots.
Attach the camera shelf (N) to the connecting plate (M) using M4x6 flat head bolts (S). Tighten M4x6
dome head screws (T) into back of camera shelf and connecting plate.
STEP 9
Attach the connecting plate (M) to the column (J) at the desired height using M6x25 bolts (R). Tighten
bolts using a screwdriver.
S
T
R

7
STEP 10
OPTION A: Landscape View
To rotate from portrait to landscape view, remove the two screws from the back of support plate (F).
Turn the display, and secure with the previously removed screws.
OPTION B: Portrait View
To rotate from landscape to portrait view, remove the two screws from the back of support plate (F).
Turn the display, and secure with the previously removed screws.
Install at least two screws diagonally to
secure the display.

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303