Vivo STAND-V001H User manual

Single Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001h
SKU: STAND-V001H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
VESA Plate
B(x1)
Bracket
C(x1)
Base
M-A (x4)
M4x12
M-D (x4)
M5x16
J (x1)
6mm Allen
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
M-F (x4)
Spacer
M-E (x4)
D5 Washer
D(x1)
Pole
E(x1)
Pole Cover
F (x1)
Cable Clip
G(x1)
Thumbscrew
H (x3)
Screw
I (x1)
4mm Allen
Wrench
M-C (x4)
M5x12
M-B (x4)
M4x16
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Attach the pole cap (E) to the top of the pole (D).
TOOLS NEEDED
22 lbs
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
Use the 4mm Allen wrench (I) to tighten the screws (H) into the pole from the bottom of the base (C).
E
D
C
H
I

4
STEP 3
Slide the cable clip (F) onto the pole. Slide the mounting bracket (B) onto the pole. Tighten the
mounting bracket (B) on the pole using a 6mm Allen wrench (J).
B
F
J

5
STEP 4
OPTION A: Flat Back Monitor
For flat back monitor, secure VESA plate (A) to
monitor using screws (M-A or M-C) and washers
(M-E).
OPTION B: Curved Back Monitor
For monitor with curved or recessed back, align
spacers (M-F) with mounting holes in monitor,
and secure VESA plate (A) to monitor using
screws (M-B or M-D) and washers (M-E).
M- A
M- C
M- E
A
M- B
M- D
M- E
M- F
A
Slide monitor with VESA plate onto mounting
bracket.
STEP 5
Secure with thumbscrew (G).
G

6
STEP 6
STEP 7
Manage cables with installed cable clip.
Tighten or loosen tilt joint using 6mm Allen wrench (J).
J

7
STEP 8
Store tools in cable clip.
STEP 9
Adjust monitor position and rotation.
I
J
180 °
+45 °
-45°
360°

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303