Vivo MOUNT-KB08SW User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb08s
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Under Desk Keyboard Tray with
Swinging Height Adjustment
SKU: MOUNT-KB08S/SW

2
PACKAGE CONTENTS
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please contact our product support team at 309-278-5303 or [email protected]om for further assistance.
Check carefully to make sure there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Keyboard
Tray Set
NOTE: 2 Extra screws have been included of each
TOOLS NEEDED
B(x2)
Connecting Plate
C(x2)
Height Adjustable
Bracket Set
D(x1)
Keyboard
STop
T-A (x1)
Mounting Template
S-A (x18)
M5x12mm Screw
S-B (x8)
M5x14mm Screw

3
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray Set (A) by placing Connecting Plates (B) into the insets on underneathside of
Tray. Secure with M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Install Keyboard Stop (D) onto assembled Keyboard Tray using M5x12mm Screws (S-A) and a Phillips
screwdriver.
S-A
D
S-A
A
B

4
STEP 3
Secure Height Adjustable Bracket Set (C) to the sides of Keyboard Tray (A) using M5x12mm
Screws (S-A) and a Phillips screwdriver.
S-A
C
A

5
STEP 4
Unfold the Adjustable Brackets (C) by pressing down on the levers and pulling the
top bracket up. Make sure the brackets are adjusted to the same level for installation.
C

6
STEP 5
Drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit. Mount keyboard tray assembly using
M5x14mm Screws (S-B) and a Phillips screwdriver.
Hold Mounting Template (T-A) to the underside of desk, 0.5” (12mm) from the edge and mark hole
locations.
S-B
Desktop
T-A
0.5”/12mm from desk edge
Underside of Desk

7
ASSEMBLY COMPLETE
Keyboard tray is now ready for use.
Desktop

LAST UPDATED: 08/07/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303