Vivo MOUNT-PS02V User manual

Power Strip/Surge Protector VESA Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-ps02v
SKU: MOUNT-PS02V
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
TOOLS NEEDED
2.2lbs
(1kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
A (x1)
Mounting Bracket
B(x1)
Clamp
S-A (x2)
M4x5mm Screws
M-C (x4)
M6x14mm Screws
M-D (x4)
M8x20mm Screws
M-E (x4)
M5 Washer
M-F (x4)
M8 Washer
M-G (x2)
Small M8 Washer
M-A (x4)
M4x14mm Screws
M-B (x4)
M5x14mm Screws
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
min. 15mm/.59”
to 117mm/4.6”
Connect Clamp (B) to Mounting Bracket (A) using M4x5mm Screws (S-A) and a Phillips screwdriver.
Mounting holes on Clamp (B) can be select based on the desired spacing of opening for power strip.
A
B
S-A

3
STEP  - MOUNTING OPTIONS
VESA Brackets - Le or Right Side:
Mount assembly under le or right TV mount’s VESA bracket
using appropriate Screws (M-A thru M-B), Washers (M-E or
M-F), and a Phillips screwdriver. Install TV mount’s second VESA
bracket using appropriate Screws (M-A thru M-B), Washers (M-E
or M-F), Small M8 Washer (M-G), and a Phillips screwdriver.
VESA Brackets - Top:
Mount assembly under top of TV mount’s VESA bracket using
appropriate Screws (M-A thru M-B), Washers (M-E or M-F), and
a Phillips screwdriver for top portion. Secure bottom of VESA
brackets using appropriate Screws (M-A thru M-B), Washers
(M-E or M-F), Small M8 Washer (M-G), and a Phillips screwdriver.
Freestanding TV Mount
Mount assembly directly to VESA holes on back of TV
using appropriate Screws (M-A thru M-D), Washers
(M-E or M-F) and a Phillips screwdriver.
M-A
M-B
M-E M-F
M-C
M-D
M-A
M-B M-C M-D
M-E
M-G M-G
M-F
M-A
M-B M-C M-D
M-E
M-E M-F
M-G M-G
M-F
M-A
M-B M-C M-D
M-A
M-B M-C M-D
M-E M-F
STEP 
Place power strip into assembled mount and tighten hand bolt on
Clamp (B).

LAST UPDATED: 01/16/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303