Vivo STAND-V002R User manual

Dual Vertical Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002r
[email protected]om www.vivo-us.com 309-278-5303
SKU: STAND-V002R

2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
B(x1)
Pole
C(x1)
Clamp
M-A (x8)
M4x12
M (x1)
6mm Allen
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Grommet Plate
E(x2)
VESA Bracket
F (x1)
Pole Connector
G(x2)
Cable Clip
H (x1)
Base Cover
L (x1)
5mm Allen
Wrench
M-C (x8)
D5 Washer
M-B (x8)
M5x12
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
J (x1)
Support Plate
I (x5)
So Pad
K (x1)
3mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
OPTION A: Clamp Installation
Slide cable management clip (G) and base cover (H) on to bottom pole (A). Thread bottom pole (A)
onto clamp (C). Tighten grub screws in bottom of clamp (C) using 3mm allen wrench (K). Secure
clamp (C) to desktop as shown in diagram.
TOOLS NEEDED
Phillips
Screwdriver
OPTION B: Grommet Base Installation
Remove screw from top of bolt in clamp (C). Stick so pads (I) to bottom of grommet base (D). Slide
cable management clip (G) and base cover (H) on to bottom pole (A). Thread bottom pole (A) onto
grommet base (D). Tighten grub screws in bottom of grommet base (D) to using 3mm allen wrench
(K). Slide metal pad (J) over bolt and slide through grommet hole in bottom of desktop. Thread into
bottom of pole (C).
I
10-88mm
K
G
H
C
A
C
D
I
10-80mm
G
H
J
K
A
22 lbs
Per Arm
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

4
STEP 2
Slide VESA bracket (E) over top of pole (A). Tighten using 5mm allen wrench (L).
STEP 3
Slide cable management clip (G) over bottom of pole (B). Use pole connector (F) to attach pole (B) to
pole (A) as shown in diagram.
L
E
G
F
B
K

5
STEP 4
Slide the remaining VESA bracket (E) over top of pole (B). Tighten using 5mm allen wrench (L).
STEP 5
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitors, making sure to
leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plates. Secure using two more bolts (M-A
or M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts using phillips screwdriver.
E
L
M- A
M- B
M- C
1 2
3m m
3
M- A
M- B
M- C

6
STEP 6
STEP 7
Store allen wrenches (M, L) in cable management clip (G) for future adjustment.
Adjust tension in monitor bracket with 6mm allen wrench (M) as shown in diagram.
+45°
-45°
M
L
M

7
Adjust as Desired
+45°-45°
360 °
360 °
360 °
360 °
+45°-45°

LAST UPDATED: 10/28/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M