Vivo STAND-V101F User manual

Single Monitor Stand with Headphone Holder
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v101f
SKU: STAND-V101F
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Post
B(x1)
Le Foot
C(x1)
Right Foot
J (x4)
M6x20
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
VESA Plate
E(x1)
Headset
Hook
F (x2)
Hinge Cover
G(x1)
Cover
H (x1)
Connecting
Plate
I (x1)
Thumbscrew
K (x2)
M5x6
M-A (x4)
M4x12
M-C (x4)
M5x12
L (x1)
M3x8
M (x1)
4mm Allen Key
M-F (x4)
Spacer
M-D (x4)
M5x16
M-E (x4)
D5 Washer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-B (x4)
M4x16
N (x1)
6mm Allen Key

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
17.6lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Position le and right feet (B, C) together. Link feet using the connecting plate (H) with M5x6 bolts (K),
and tighten with the 4mm Allen key (M).
H
K
C
B
M

4
STEP 2
STEP 3
Snap cover (G) onto feet. Attach headset hook (E) to post using M3x8 screw (L) and
tighten with a Phillips screwdriver.
J
A
M
Assemble post (A) to feet using M6x20 bolts (J), and tighten with the 4mm Allen key (M).
L
E
G

5
STEP 4
D
M- A
M- C
M- E
M- B
M- D
M- EM- F
TV
TV
TV TV
OPTION A: Flat Back Monitor
Attach VESA plate (D) to monitor using bolts (M-A or M-C) and washers (M-E).
OPTION B: Curved Back Monitor
Attach VESA plate (D) to monitor using bolts (M-B or M-D), washers (M-E), and
spacers (M-F).

6
STEP 5
Slide VESA plate (D) onto bracket on post (A) and secure using thumb screw (I). Adjust monitor
height by loosening the knob in back, then tighten the knob with monitor at desired height. Adjust
tilt support using the 6mm Allen key (N), then press hinge covers in place.
2
11
I
F
N

7
STEP 6
Adjust monitor position and route cables through the cable hole. Headset or headphones may be
stored on the headset hook in back.
±180 °
+15 °
-15°
±30 °

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303