Vivo STAND-TV65A User manual

Easel Studio TV Stand
Scan the QR code with your mobile device or follow the link

Instruction Manual
https://vivo-us.com/products/stand-tv65a
  1-800-371-5654
SKU: STAND-TV65A

2 3
PACKAGE CONTENTS
WARNING!
A (x2)
Leg
B(x1)
Center Leg
C(x2)
VESA Bracket
I (x2)
Screw
J x1)
2mm Allen
Wrench
K(x1)
4mm Allen
Wrench
H(x4)
Cable Clip
D (x1)
Pole
E (x1)
Steel Cable
F (x2)
Security Clip
G (x2)
Security
Clip Clamp
If you do not understand these directions, or if you have any doubts about the safety of the





NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
ASSEMBLY STEPS
STEP 1
Screw side legs (A) and center leg (B) into base of pole (D)
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.

Phillips
Screwdriver
M-F (x4)
Square
Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-H (x8)
Big Spacer
M-C (x4)
M6x30
STEP 2
(K)
77lbs
(34.93kg)
M(x4)
Anchor
L (x4)
Screw
TIPOVER WARNING

• 
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
Drill

4 5
STEP 3
Peel backing from cable clips (H) 
short screws (I)NOTE: Screws are able to thread directly into wood without drilling

STEP 4 (Continued)
OPTION B: Curved Back Monitor
Position the VESA brackets (C)
(M-C, M-D or M-E) with square washers (M-F) and spacers (M-G, M-H) with security
clips (F) 
STEP 4
OPTION A: Flat Back Monitor
Position the VESA brackets (C) 
(M-A or M-B) with square washers (M-F), with security clips (F)

6 7
STEP 5 STEP 6
Slide the TV with VESA brackets (C) onto the pole (D) and organize cables using the cable
management clips (H)
using the shipping blanket for protection, and slide the pole (D) into the VESA brackets (C)

(G) as guides, mark drilling locations

anchors (M) into holes and mount clamps to wall using screws (L)
(E) through security clips on TV and center holes in cable clamps (G) as shown and
tighten clamps (G) using the 2mm Allen wrench (J)




For more VIVO products, check out our website at:

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
  1-800-371-5654