Vivo MOUNT-VP07DP User manual

White Universal Drop Ceiling Projector Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vp07dp
SKU: MOUNT-VP07DP
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Mount
B(x1)
Bracket
C (x1)
Mount Arms
E(x2)
Clip
S-F (x2)
Plastic Oval
Washers
D (x1)
Ceiling Plate
S-A (x2)
M6x18mm
Screw
S-B (x2)
M6 Washer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS
TO MOUNT. We include mounting for brick and concrete. If unsure, please contact us at vivo-us.com,
email at [email protected]om, or call us at 309-278-5303.
M-A (x4)
M3x8mm
Screw
M-B (x4)
M4x10mm
Screw
M-C (x4)
M5x10mm
Screw
M-D (x4)
M6x10mm
Screw
M-E (x4)
M3 Washer
M-F (x4)
M4 Washer
S-C (x6)
M5x12mm
Screw
S-D (x6)
Small M5
Washer
S-E (x6)
Plastic M5
Washer
T-A (x1)
4mm Allen
Wrench
M-G (x4)
M5x12 Washer
M-H (x4)
M6 Washer
F (x1)
Y-Cable with
Lock
T-B (x1)
5mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Drill
Remove plastic plug from Ceiling Plate (D).
29.7 lbs
(13.5 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 2
Insert toggles at end of Y-Cable (F) into 2 of the 16 slots on the top of the Ceiling Plate (D), making sure
the slots chosen will provide optimal support for the mount with projector. Place Ceiling Plate into
suspended-ceiling grid. Thread end of cable through the side hole in the lock in the direction of the
arrow, wrap cable around beam or other support, then insert cable down through center hole in lock
and pull down to secure.
F
D
D

4
STEP 3
OPTION B: Insert cables through side of Mount
(A) if cables will be exposed below ceiling.
Push Clips (E) down over T-bar to hold the Ceiling Plate (D) down.
Connect Bracket (B) to Mount (A) using Plastic Oval Washers (S-F), Plastic M5 Washer (S-E), Small M5
Washer (S-D), M5x12mm Screw (S-C), and 4mm Allen Wrench (T-A).
STEP 4
STEP 5
OPTION A: Insert cables through center of Mount
(A) if cables will be hidden above ceiling.
E
A
S-F
T-A
B
S-E
S-D
S-C

5
STEP 6
Secure Mount Assembly to Ceiling Plate (D) using M6x18mm Bolts (S-A) with M6 Washers (S-B), and
tighten with 5mm Allen Wrench (T-B).
T-A
S-A
S-B
D
S-B
S-A
T-B

6
STEP 7
STEP 8
Angle Mount Arms (C) with Projector and hook onto Assembled Mount to partially secure.
Align Mount Arms (C) with mounting holes in projector, and mount to projector using
screws (M-A thru M-D) and Washers (M-E thru M-H) most appropriate for your projector.
NOTE: If your projector has 3 mounting holes, simply remove one of the arms, or for mini
projectors with a single hole, remove all arms and mount projector directly to Bracket.
M-A/M-B/M-C/M-D
M-E/M-F/M-G/M-H
C
C

7
Secure Mount Arms (C) to Assembled Mount using M5 Plastic Washer (S-E), M5 Washer (S-D),
M5x12mm Screw (S-C) and 4mm Allen Wrench (T-A).
STEP 8
Adjust angle and rotation of projector if desired by loosening screws on Assembled Mount using 4mm
Allen Wrench (T-A).
STEP 9
T-A
T-A
T-A
C
S-E
S-D
S-C

LAST UPDATED: 07/14/2022
REV1.2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303