Vivo STAND-V102G2U User manual

Pneumatic Arm Dual Monitor Desk Mount with USB
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v102g2u
SKU: STAND-V102G2U
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
PACKAGE CONTENTS
A (x1)
Base
B(x2)
Lower Arm
C(x2)
Gas Spring Arm
M (x1)
4mm Allen
Wrench
N(x1)
6mm Allen
Wrench
L(x1)
3mm Allen
Wrench
J (x1)
Clamp
K (x4)
Flat Head Bolt
M-A (x8)
M4x12
D(x2)
VESA Plate
E(x1)
Clamp Plate
F (x1)
Grommet
Plate
G(x1)
So Pad
H (x1)
Cover
I (x1)
Clamp
Brace
M-B (x8)
M5x12
M-C (x8)
D5 Washer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
2.2-33lbs
(1-15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
OPTION A: Clamp Installation
Attach clamp brace (I) to base (A) using flat
head bolts (K) and tighten with 4mm Allen
wrench (M). Apply so pad (G) to underside
of base. Loosen bolts on back of clamp (J),
leaving 6mm of thread exposed.
For a desk thickness of 3/8” - 2-1/2” (10 -
58mm), hang assembled clamp into top 4 slots
of clamp brace, or for a desk thickness of 2”
- 3-3/8” (50 - 85mm), into lower 4 slots. Place
clamp plate (E) on top of clamp bolts. Position
base on desktop and tighten clamp bolts
evenly using 6mm Allen wrench (N). Attach
cover (H) to back of clamp brace. 6mm
M
J
A
I K
MG
N
H
E
10-58mm
50-85mm
E
6mm
M
J
6mm
M
J
A
I K
MG
N
H
E
10-58mm
50-85mm
E
6mm
M
J

4
STEP 1 (Continued)
STEP 2
STEP 3
OPTION B: Grommet Base
Installation
Attach grommet plate (F) to base (A)
using flat head bolts (K) and tighten
with 4mm Allen wrench (M). Apply
so pad (G) to underside of base.
Position base over grommet hole in
desktop, or drill two 3/8” (10mm)
holes 1-25/32” (45mm) apart through
the desk for installation. Remove
clamp bolts from clamp (J) using
6mm Allen wrench (N) if needed.
Insert clamp bolts with clamp plate
(E) up through the underside of the
desk and tighten to the base using
the 6mm Allen wrench (N).
Place lower arms (B) on top of base, and secure by turning
the lower screws in back with 3mm Allen wrench (N).
(NOTE: The upper screws in back do not have a function on
this model).
Place gas spring arms (C) on top of lower arm, and secure by turning the screw in back with 3mm
Allen wrench.
J
N
N
E
G
K
F
M

5
STEP 4
STEP 5
STEP 6
TV
TV
TV
Install the VESA plates (D) to monitors using M4x12 bolts (M-A) or M5x12 bolts (M-B) with
washers (M-C), making sure the arrow in back is pointing up.
Pull back the release lever on the support bracket, then place
the monitor with VESA plate into the support. Repeat for
second monitor.
If needed, adjust gas spring arms to support the monitors using the 6mm
Allen wrench (N). Turn the screw in back clockwise to decrease support,
and counter-clockwise to increase. Adjust the tilt joint to tighten or loosen
tilt support.

6
STEP 7
Remove cable covers on upper arms using a Phillips screwdriver. Slide cable covers on
lower arms forward to remove.
STEP 8
Organize cables, then reinstall cable covers to arms.

7
STEP 9
For safety, please do not extend the monitor behind the desk. This may cause instability and tip the
desk over.
Adjust as Desired

LAST UPDATED: 03/18/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303